NAICS 333512 - Machine Tool (Metal Cutting Types) Manufacturing

GENERAL STATISTICS
Year	Companies	Establishments		Employment			Compensation		Production ($ million)
		Total	with 20 or more employees	Total (000)	Production		Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
		Total	with 20 or more employees	Total (000)	Workers (000)	Hours (Mil)	Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
Sources: 1997 and 2002 Economic Census; other years, up to 2006, are from Annual Survey of Manufactures. Establishment counts for non-Census years are from County Business Patterns; 1997 and 2002 values are from the 1997 and 2002 censuses, respectively. ‘P's show projections by the editors.
1997	369	401	262	29.4	16.9	35.0	1,268.4	17.83	2,819.7	2,609.4	5,334.9	142.2
1998		460	259	27.5	16.0	32.4	1,196.4	18.30	2,866.8	2,410.2	5,244.0	224.5
1999		456	255	25.5	14.9	30.2	1,159.4	17.90	2,483.5	2,081.0	4,601.6	186.1
2000		487	245	24.9	13.9	28.8	1,152.9	18.74	2,510.5	2,175.3	4,694.9	146.9
2001		519	246	21.6	11.6	23.8	1,035.2	18.52	2,236.1	1,699.4	4,090.1	106.8
2002	342	372	202	18.4	9.4	17.5	875.4	21.15	1,618.7	1,431.9	3,154.0	61.5
2003		557	209	16.3	8.0	17.5	821.6	19.69	1,577.0	1,438.0	3,060.4	45.8
2004		477	194	16.1	8.2	17.6	862.9	20.91	1,803.2	1,639.7	3,442.4	42.4
2005		504	188	16.3	8.8	18.6	917.6	21.79	2,292.4	1,963.2	4,158.1	70.8
2006		516P	177P	18.0	10.0	20.7	1,034.8	22.29	2,753.3	2,195.3	4,830.8	125.3
2007		525P	166P	12.8P	6.2P	13.3P	809.5P	22.55P	1,977.0P	1,576.3P	3,468.7P	38.7P
2008		535P	156P	11.3P	5.2P	11.3P	768.9P	23.06P	1,894.8P	1,510.8P	3,324.6P	24.8P
2009		544P	145P	9.7P	4.2P	9.3P	728.4P	23.58P	1,812.7P	1,445.3P	3,180.5P	10.9P
2010		553P	135P	8.2P	3.2P	7.3P	687.8P	24.10P	1,730.6P	1,379.9P	3,036.4P

INDICES OF CHANGE
Year	Companies	Establishments		Employment			Compensation		Production ($ million)
		Total	with 20 or more employees	Total (000)	Production		Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
		Total	with 20 or more employees	Total (000)	Workers (000)	Hours (Mil)	Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
Sources: Same as General Statistics. Values reflect change from the base year, 2002. Values above 100 mean greater than 2002, values below 100 mean less than 2002, and the values of 100 in other years means the same as 2002. ‘P's show projections by the editors.
1997	108	108	130	160	180	200	145	84	174	182	169	231
1998		124	128	149	170	185	137	87	177	168	166	365
1999		123	126	139	159	173	132	85	153	145	146	303
2000		131	121	135	148	165	132	89	155	152	149	239
2001		140	122	117	123	136	118	88	138	119	130	174
2002	100	100	100	100	100	100	100	100	100	100	100	100
2003		150	103	89	85	100	94	93	97	100	97	74
2004		128	96	88	87	101	99	99	111	115	109	69
2005		135	93	89	94	106	105	103	142	137	132	115
2006		139P	87P	98	106	118	118	105	170	153	153	204
2007		141P	82P	70P	66P	76P	92P	107P	122P	110P	110P	63P
2008		144P	77P	61P	55P	65P	88P	109P	117P	106P	105P	40P
2009		146P	72P	53P	45P	53P	83P	111P	112P	101P	101P	18P
2010		149P	67P	45P	34P	42P	79P	114P	107P	96P	96P

SELECTED RATIOS
For 2002	Avg. of All Manufact.	Analyzed Industry	Index	For 2002	Avg. of All Manufact.	Analyzed Industry	Index
Sources: Same as General Statistics. The ‘Average of All Manufacturing’ column represents the average of all manufacturing industries reported for the most recent complete year available. The Index shows the relationship between the Average and the Analyzed Industry. For example, 100 means that they are equal; 500 that the Analyzed Industry is five times the average; 50 means that the Analyzed Industry is half the national average. The abbreviation ‘na’ is used to show that data are ‘not available’. Ratios shown for 2002, the last complete census year.
Employees per Establishment	42	49	118	Value Added per Production Worker	182,367	152,330	84
Payroll per Establishment	1,639,184	2,353,226	144	Cost per Establishment	5,769,015	4,351,344	75
Payroll per Employee	39,053	47,576	122	Cost per Employee	137,446	87,973	64
Production Workers per Establishment	30	25	86	Cost per Production Worker	195,506	172,202	88
Wages per Establishment	694,845	994,960	143	Shipments per Establishment	11,158,348	8,478,495	76
Wages per Production Worker	23,548	39,375	167	Shipments per Employee	265,847	171,413	64
Hours per Production Worker	1,980	1,862	94	Shipments per Production Worker	378,144	335,532	89
Wages per Hour	11.89	21.15	178	Investment per Establishment	361,338	165,323	46
Value Added per Establishment	5,381,325	3,849,194	72	Investment per Employee	8,609	3,342	39
Value Added per Employee	128,210	77,821	61	Investment per Production Worker	12,245	6,543	53

LEADING COMPANIES Number shown: 75 Total sales ($ mil): 19,695 Total employment (000): 82.8
Company Name	Address				CEO Name	Phone	Co. Type	Sales ($ mil)	Empl. (000)
Source: Ward's Business Directory of U.S. Private and Public Companies, Volumes 1 and 2, 2008. The company type code used is as follows: P - Public, R - Private, S - Subsidiary, D - Division, J - Joint Venture, A - Affiliate, G - Group. Sales are in millions of dollars, employees are in thousands. An asterisk (*) indicates an estimated sales volume. The symbol < stands for ‘less than’. Company names and addresses are truncated, in some cases, to fit into the available space.
Black and Decker Corp.	101 Schilling Rd.	Hunt Valley	MD	21031	Nolan D. Archibald	410-716-3900	P	6,563	25.0
Kennametal Inc.	PO Box 231	Latrobe	PA	15650	Carlos M. Cardoso	724-539-5000	P	2,386	14.0
Regal-Beloit Corp.	200 State St.	Beloit	WI	53511		608-364-8800	P	1,803	17.9
Johnstown Holdings Inc.	545 Central Ave.	Johnstown	PA	15902	John Bolduc	814-535-9000	R	918*	0.2
P.R. Hoffman Machine Products	1517 Commerce	Carlisle	PA	17015		717-243-9900	S	812*	<0.1
Giddings & Lewis Machine Tools	PO Box 590	Fond du Lac	WI	54936		920-921-9400	R	757*	0.4
Makino Inc.	7680 Innovation	Mason	OH	45040		513-573-7200	R	595*	0.2
Thermadyne Holdings Corp.	16052 Swingley	St. Louis	MO	63017	John Michael Bobyck	636-728-3000	P	494	2.9
Gleason Corp.	PO Box 22970	Rochester	NY	14692		585-473-1000	R	350*	2.6
Hercules Energy Manufacturing	16 S Penn. Avenue	Oklahoma City	OK	73107	Jack E. Golsen	405-235-4546	S	332*	1.3
Summit Machinery Co.	PO Box 1402	Oklahoma City	OK	73101	Jack E. Golsen	405-235-2075	S	332*	1.3
Haas Automation Inc.	2800 Sturgis Ave.	Oxnard	CA	93030	Gene Haas	805-278-1800	R	327*	0.8
Hardinge Inc.	PO Box 1507	Elmira	NY	14902	J. Patrick Ervin	607-734-2281	P	327	1.5
Morey Machinery Manufacturing	PO Box 4827	Middletown	NY	10941	Jack E. Golsen	845-343-1851	S	309*	1.2
Gerber Technology Inc.	24 Industrial Park	Tolland	CT	06084	John Hancock	860-871-8082	S	197	1.2
Mazak Corp.	PO Box 970	Florence	KY	41022	Brian Papke	859-342-1222	R	192*	0.5
Manan Medical Products	241 W Palatine Rd.	Wheeling	IL	60090	Werner Mittermeier	847-637-3333	R	191*	1.1
Stark Industrial Inc.	PO Box 3030	North Canton	OH	44720	Ray Wilkof	330-966-8108	R	190*	<0.1
Duo-Fast Corp.	2400 Galvin Dr.	Elgin	IL	60123		847-634-1900	S	136*	0.9
OSG Tap and Die Inc.	676 E Fullerton Ave	Glendale Hts	IL	60139	Gohei Osawa	630-790-1400	R	133*	<0.1
Clausing Industrial Inc.	1819 N Pitcher St.	Kalamazoo	MI	49007		269-345-7155	R	125*	<0.1
JH Fletcher and Co.	PO Box 2187	Huntington	WV	25722	Sammons Duncan	304-525-7811	R	120*	0.2
P and F Industries Inc.	445 Broadhollow	Melville	NY	11747	Richard A. Horowitz	631-694-9800	P	112	0.2
CB Manufacturing and Sales Co.	PO Box 37	West Carrollton	OH	45449	Charlie Biehn	937-866-5986	R	111*	0.1
Iscar Metals Inc.	300 Westway Pl.	Arlington	TX	76018	Jacob Harpaz	817-258-3200	R	95*	<0.1
Networks Electronic Corp.	9750 DeSoto Ave.	Chatsworth	CA	91311	Tamara Christen	818-341-0440	R	73*	0.1
Loos and Company Inc.	PO Box 98	Pomfret	CT	06258	William Loos	860-928-7981	R	71*	0.4
Hypertherm Inc.	PO Box 5010	Hanover	NH	03755	Richard Couch	603-643-3441	R	64*	0.5
Vulcan Engineering Co.	PO Box 307	Helena	AL	35080		205-663-0732	R	62*	0.2
Brinkman Products Inc.	167 Ames Street	Rochester	NY	14611	Robert Brinkman	585-235-4545	R	62*	0.3
A.K. Allen Inc.	PO Box 350	Mineola	NY	11501	A.K. Allen	516-747-5450	R	56*	0.2
Sunnen Products Co.	7910 Manchester	Saint Louis	MO	63143	Matt Kreider	314-781-2100	R	52*	0.5
Regal Cutting Tools	5330 E Rockton Rd.	South Beloit	IL	61080	Gene Zumba		S	50*	0.3
AGIE Ltd.	9009 Perimeter	Charlotte	NC	28216	Glynn Fletcher	704-927-8900	S	46*	<0.1
Fadal Machining Centers L.L.C.	PO Box 2477	Chatsworth	CA	91313	Peter Mosher	818-407-1400	S	45*	0.3
Thielenhaus Microfinish Corp.	42925 W 9 Mile Rd.	Novi	MI	48375	Manfred Sieringhaus	248-349-9450	R	45*	0.3
Continental Machines Inc.	5505 W 123rd St.	Savage	MN	55378	M Johnson	952-890-3300	R	45*	0.2
Mosey Manufacturing Company	262 Fort Wayne	Richmond	IN	47374	George Mosey	765-983-8800	R	43*	<0.1
New York Twist Drill Inc.	PO Box 368	South Beloit	IL	61080	Gene Zimbea		S	42*	0.2
Fastcut Tool Corp.	200 Front St.	Millersburg	PA	17061	Bill Coyle	717-692-8232	S	42*	<0.1
Ashley F. Ward Inc.	7490 Easy St.	Mason	OH	45040		513-398-1414	R	40*	0.3
IMPCO Machine Tools	PO Box 10156	Lansing	MI	48901	Dave Houghton	517-484-9411	R	38*	0.2
Airmar Technology Corp.	35 Meadowbrook	Milford	NH	03055	Stephen Boucher	603-673-9570	R	37*	0.2
Composidie Inc.	1295 State Rte. 380	Apollo	PA	15613	Ted Wohlin	724-727-3466	R	35*	0.2
CRC-Evans Pipeline Int’l	PO Box 50368	Tulsa	OK	74150		918-438-2100	R	35*	0.1
Picut Manufacturing Company	140 Mount Bethel	Warren	NJ	07059	Frederick Picut	908-754-1333	R	35*	<0.1
DTI Lebanon Subsidiary Inc.	PO Box 512	Lebanon	MO	65536	Tom Kowall	417-532-2142	R	33*	0.3
W.A. Whitney Co.	PO Box 1206	Rockford	IL	61105	Gary Geller	815-964-6771	S	33*	0.2
MC Machinery Systems Inc.	1500 Michael Dr.	Wood Dale	IL	60191	Tetsuji Koike	630-860-4210	R	32*	0.2
Kingsbury Corp.	80 Laurel St.	Keene	NH	03431		603-352-5212	R	32*	0.2
Magnetrol International Inc.	5300 Belmont Rd.	Downers Grove	IL	60515		630-969-4000	R	31*	0.3
PMC Industries Corp.	29100 Lakeland	Wickliffe	OH	44092		440-943-3300	S	31*	0.2
Reed-Rico	18 Industrial Dr.	Holden	MA	01520	Bruce Hutchinson	508-829-4491	S	30*	0.3
Moore Tool Company Inc.	PO Box 4088	Bridgeport	CT	06607	Newman Marsilius	203-366-3224	S	29*	0.1
Pmt Group Inc.	800 Union Ave.	Bridgeport	CT	06607	Newman Marsilius	203-367-8675	R	29*	0.1
Hunt Valve Company Inc.	1913 E State St.	Salem	OH	44460	Gerald Bogner	330-337-9535	R	29*	0.2
Rollway Bearing International	PO Box 4827	Syracuse	NY	13221	Bill Eames		S	29*	0.2
Howmet TMP Corp.	3960 S Marginal Rd.	Cleveland	OH	44114	Ray Mitchell	216-391-3885	S	28*	0.2
Romac Industries Inc.	21919 20th Ave. SE	Bothell	WA	98021		425-951-6200	R	28*	0.2
Robbins Co.	29100 Hall St.	Solon	OH	44139	Lok Home	440-248-3303	R	27*	0.1
Tool-Flo Manufacturing Inc.	7803 Hansen Rd.	Houston	TX	77061	Dennis Flolo	713-941-1080	R	26*	0.1
Electronic Hardware Ltd.	PO Box 15039	N Hollywood	CA	91615	Richard Degn	818-982-6100	R	26*	<0.1
Marvel Manufacturing Company	3501 Marvel Dr.	Oshkosh	WI	54902	John Petek	920-236-7200	R	25*	0.2
PMC - Colinet Inc.	29100 Lakeland	Wickliffe	OH	44092	Dwight Perry	440-943-3300	S	25*	0.1
Microbest Inc.	670 Captain Neville	Waterbury	CT	06705	Steven Griffin	203-597-0355	R	25*	0.1
Channel Products Inc.	7100 Wilson Mills	Chesterland	OH	44026		440-423-0113	S	24*	0.1
Carolina Energy Solutions Inc.	244 E Mt Gallant Rd	Rock Hill	SC	29730	Richard Bryant	803-980-3060	R	23*	0.2
Peddinghaus Corp.	300 N Wash. Ave.	Bradley	IL	60915	Michael Sharp	815-937-3800	R	23*	0.2
Gehring Corp.	24800 Drake Rd.	Farmington Hls	MI	48335	Robert Dermolen	248-478-8060	R	23*	<0.1
Hy-Level Industries Inc.	PO Box 368015	Cleveland	OH	44136	Donald Rebar	440-572-1540	R	22*	0.2
Centricut L.L.C.	2 Technology Dr.	West Lebanon	NH	03784		603-298-7849	S	22*	0.1
Self Industries Inc.	3491 Mary Taylor	Birmingham	AL	35235	Michael McDowell	205-655-3284	R	22*	<0.1
Golden States Engineering Inc.	15338 Garfield Ave.	Paramount	CA	90723	Alexandra Rostovski	562-634-3125	R	22*	0.1
Cable West Inc.	276 Preuit Rd.	Wheatland	WY	82201	Donald Nichols	307-322-9214	R	22*	0.1
Wright-K Technology Inc.	2025 E Genesee	Saginaw	MI	48601	John Sivey	989-752-3103	R	22*	0.1

MATERIALS CONSUMED
Material	Quantity	Delivered Cost ($ million)
Source: 2002 Economic Census. Explanation of symbols used: (D): Withheld to avoid disclosure of competitive data; na: Not available; (S): Withheld because statistical norms were not met; (X): Not applicable; (Z): Less than half the unit shown; nec: Not elsewhere classified; nsk: Not specified by kind; - : zero; p : 10-19 percent estimated; q : 20-29 percent estimated.
Fluid power pumps, motors, and hydrostatic transmissions	(X)	13.8
Fluid power cylinders and rotary actuators (hydraulic and pneumatic)	(X)	8.1
Fluid power filters (hydraulic and pneumatic)	(X)	2.4
Fluid power hose, tube fittings, and assemblies (hydraulic and pneumatic)	(X)	7.3
Fluid power valves (hydraulic and pneumatic)	(X)	5.8
Metal bolts, nuts, screws, and other screw machine products	(X)	13.8
Other fabricated metal products (exc. fluid power products and forgings)	(X)	50.0
Forgings	(X)	2.5
Iron and steel castings (rough and semifinished)	(X)	50.2
Nonferrous (aluminum, copper, etc.) castings (rough and semifinished)	(X)	2.8
Steel bars, bar shapes, and plates (exc. castings, forgings, fabr. metal products)	(X)	43.5
Steel sheet and strip (including tinplate)	(X)	(D)
Steel structural shapes (exc. castings, forgings, fabr. metal products)	(X)	(D)
All other steel shapes and forms (exc. castings, forgings, fabr. metal products)	(X)	13.3
Nonferrous shapes and forms	(X)	3.6
Fractional horsepower electric timing motors (less than 1 hp)	(X)	9.0
Other fractional horsepower electric motors (less than 1 hp)	(X)	2.2
Integral horsepower electric motors and generators (1 hp or more)	(X)	12.6
Electrical transmission, distribution, and control equipment	(X)	16.7
Electrical industrial capacitors, resistors, rheostats, and coil windings	(X)	3.3
Numerical controls, metalworking machinery (exc. programmable)	(X)	28.7
Programmable controllers for metalworking machinery	(X)	27.7
Printed circuit assemblies, loaded boards, and modules	(X)	16.2
Printed ciruit boards (without inserted components) for electronic circuitry	(X)	2.3
Semiconductors (incl. transistors, diodes, rectifiers, and integrated circuits), for electronic circuitry	(X)	0.4
All other miscellaneous components and accessories for electronic circuitry (exc. tubes)	(X)	5.4
Electrical instrument mechanisms and meter movements	(X)	6.8
Electronic communication equipment	(X)	0.2
Optical instruments and lenses (exc. sighting, tracking, and fire control)	(X)	0.1
Ball bearings (mounted or unmounted)	(X)	13.7
Roller bearings (mounted or unmounted).	(X)	6.2
Mechanical speed changers, gears, and industrial high-speed drives	(X)	10.2
Wood boxes, pallets, skids, and containers	(X)	4.4
Cutting tools for machine tools	(X)	17.3
Fabricated plastics products (exc. gaskets, hoses, and belting)	(X)	2.9
Paper and paperboard containers (incl. shipping sacks and other paper packaging supplies)	(X)	1.5
All other materials, components, parts, containers, and supplies	(X)	332.9
Materials, ingredients, containers, and supplies, nsk	(X)	382.0

PRODUCT SHARE DETAILS
Product or Product Class Shipments	Mil. $	Product or Product Class Shipments	Mil. $
Source: 2002 Economic Census. The values are product shipments in millions of dollars for 2002. Total product shipments may be lower or higher than industry shipments. See Introduction for a full discussion. Values of indented subcategories are summed in the main heading(s). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. The abbreviation nsk stands for ‘not specified by kind’ and nec for ‘not elsewhere classified’. A dash (-) means zero
MACHINE TOOLS, METAL CUTTING TYPES	2,561.0	nsk	6.0
Metal gear cutting machines	80.2	Parts for metal cutting machine tools (sold separately) and rebuilt and remanufactured metal cutting machine tools	566.2
Metal grinding, polishing, buffing, honing, and lapping machines, except gear-tooth grinding, lapping, polishing, and buffing	312.5	Parts for metal cutting machine tools (sold separately) and rebuilt	505.6
Metal lathes (turning machines) numerically and nonnumerically controlled	182.1	Parts for metal cutting machine tools, sold separately	388.6
Metal milling machines (excluding machining centers)	51.3	Rebuilt metal cutting type machine tools (including machines returned to same configuration they were in when new from factory)	49.5
Machine tools designed primarily for home workshops, labs, garages, etc. (metalworking and primarily metalworking)	78.3	Remanufactured metal cutting type machine tools (including machines in which the original carcass is reused and all possible modern improvements have been incorporated)	67.6
Metal drilling machines designed primarily for home workshops, labs, garages, etc	(D)	Parts for metal cutting machine tools (sold separately) and rebuilt and remanufactured metal cutting machine tools, nsk	60.6
Metal grinding and polishing machines designed primarily for home workshops, labs, garages, etc., including crankshaft regrinding and valve grinding machines	(D)	Metal machining centers (multifunction numerically controlled machines)	382.3
Metal sawing and cut-off machines designed primarily for home workshops, labs, garages, etc	2.9	Metal station type machines	138.5
Other metalworking (or primarily metalworking) machines for home workshops, labs, garages, etc., including automotive cylinder reboring machines and lathes	15.9	Other metal cutting machine tools (except those designed primarily for home workshops, laboratories, garages, etc.)	458.4
Machine tools designed primarily for home workshops, labs, etc. (metalworking and primarily metalworking),		Metal boring machines and drilling machines (excluding machining centers)	114.7
		Machine tools, metal cutting types, nsk, total	196.5

INPUTS AND OUTPUTS FOR METAL CUTTING AND FORMING MACHINE TOOL MANUFACTURING
Economic Sector or Industry Providing Inputs	%	Sector	Economic Sector or Industry Buying Outputs	%	Sector
Source: Benchmark Input-Output Accounts for the U.S. Economy, 2002, U.S. Department of Commerce, Washington D.C., January 2008. User should note that this Input-Output table is not for this particular narrowly defined industry but for a larger aggregate. Input and Output data for Metal Cutting and Forming Machine Tool Manufacturing include Input and Output data for the Annual Survey of Manufactures’ NAICS industries 333512 and 333513. The abbreviation nec stands for ‘not elsewhere classified’.
Compensation of employees	38.8		Private fixed investment	50.8
Management of companies & enterprises	7.2	Services	Exports of goods & services	27.5	Cap Inv
Wholesale trade	4.7	Trade	S/L govt. invest., other	4.7	S/L Govt
Iron & steel mills & ferroalloys	4.5	Manufg.	Plate work & fabricated structural products	3.2	Manufg.
Relay & industrial controls	2.7	Manufg.	Nonferrous metal foundries	1.7	Manufg.
Ferrous metal foundries	2.3	Manufg.	General purpose machinery, nec	1.4	Manufg.
Metal cutting & forming machine tools	2.3	Manufg.	Metal cutting & forming machine tools	1.3	Manufg.
Machine shops	1.9	Manufg.	S/L govt. invest., education	1.3	S/L Govt
Paints & coatings	1.9	Manufg.	Rolling mill & other metalworking machinery	1.3	Manufg.
Ball & roller bearings	1.3	Manufg.	Motor vehicle parts	1.2	Manufg.
Securities, commodity contracts, investments	1.3	Fin/R.E.	Sporting & athletic goods	1.2	Manufg.
Advertising & related services	1.2	Services	Educational services, nec	0.8	Services
Motors & generators	1.1	Manufg.	Federal government, investment, national defense	0.7	Fed Govt
Fluid power process machinery	1.0	Manufg.	Machine shops	0.6	Manufg.
Real estate	1.0	Fin/R.E.	Personal consumption expenditures	0.6
Valve & fittings other than plumbing	1.0	Manufg.	Fabricated metals, nec	0.5	Manufg.
Speed changers, industrial high-speed drives, & gears	1.0	Manufg.	General S/L govt. services	0.5	S/L Govt
Turned products & screws, nuts, & bolts	1.0	Manufg.	Farm machinery & equipment	0.2	Manufg.
Abrasive products	1.0	Manufg.	Warehousing & storage	0.2	Util.
Custom computer programming services	0.9	Services
Cutting tools & machine tool accessories	0.8	Manufg.
Power generation & supply	0.8	Util.
Printed circuit assemblies (electronic assembiles)	0.8	Manufg.
Truck transportation	0.7	Util.
Lessors of nonfinancial assets	0.7	Fin/R.E.
Coating, engraving, heat treating & allied activities	0.6	Manufg.
Noncomparable imports	0.6	Foreign
Taxes on production & imports, less subsidies	0.6
Monetary authorities/depository credit intermediation	0.5	Fin/R.E.
Electronic components, nec	0.5	Manufg.
Telecommunications	0.5	Services
Legal services	0.5	Services
Data processing, hosting, & related services	0.5	Services
Food services & drinking places	0.5	Services
Professional, scientific, technical services, nec	0.5	Services
Postal service	0.5	Util.
Scientific research & development services	0.4	Services
Custom roll forming	0.4	Manufg.
Accounting, tax preparation, bookkeeping, & payroll	0.4	Services
Warehousing & storage	0.4	Util.
Automotive equipment rental & leasing	0.4	Fin/R.E.
Electricity & signal testing instruments	0.3	Manufg.
Wood containers & pallets	0.3	Manufg.
Fabricated metals, nec	0.3	Manufg.
Gold, silver, & other metal ore	0.3	Mining
Hotels & motels, including casino hotels	0.2	Services
Metal cans, boxes, & other containers (light gauge)	0.2	Manufg.
Forging, stamping, & sintering, nec	0.2	Manufg.
Rubber products, nec	0.2	Manufg.
Services to buildings & dwellings	0.2	Services
Plastics products, nec	0.2	Manufg.
Maintenance/repair of nonresidential structures	0.2	Construct.
Commercial & industrial machinery rental & leasing	0.2	Fin/R.E.
Management, scientific, & technical consulting	0.2	Services
Nonmetallic minerals, nec	0.2	Mining
Air transportation	0.2	Util.
Natural gas distribution	0.2	Util.
Crowns & closures & metal stamping	0.2	Manufg.
Other computer related services, including facilities	0.2	Services
Architectural, engineering, & related services	0.2	Services
Plastics packaging materials, film & sheet	0.2	Manufg.
General purpose machinery, nec	0.2	Manufg.
Rail transportation	0.2	Util.
Business support services	0.2	Services
Plate work & fabricated structural products	0.1	Manufg.
Chemical products & preparations, nec	0.1	Manufg.
Handtools	0.1	Manufg.
Nonferrous metal foundries	0.1	Manufg.
Nondepository credit intermediation activities	0.1	Fin/R.E.
Employment services	0.1	Services
Motor vehicle parts	0.1	Manufg.
Paperboard mills	0.1	Manufg.
Automotive repair & maintenance, ex. car washes	0.1	Services
Specialized design services	0.1	Services
Bare printed circuit boards	0.1	Manufg.
Electronic capacitors, resistors, coils, transformers	0.1	Manufg.
Paperboard containers	0.1	Manufg.
Commercial & industrial equipment repair/maintenance	0.1	Services

OCCUPATIONS EMPLOYED BY METALWORKING MACHINERY MANUFACTURING
Occupation	% of Total 2006	Change to 2016	Occupation	% of Total 2006	Change to 2016
Source: Industry-Occupation Matrix, Bureau of Labor Statistics, December 4, 2007. These data are reported based on 4-digit NAICS categories but have been matched to corresponding 6-digit NAICS industry codes. The change reported for each occupation to the year 2016 is a percent of growth or decline as estimated by the Bureau of Labor Statistics. The abbreviation nec stands for ‘not elsewhere classified’.
Machinists	12.8	-14.0	Office clerks, general	1.7	-19.3
Tool & die makers	11.0	-14.0	Shipping, receiving, & traffic clerks	1.6	-21.2
Computer-controlled machine tool operators	5.4	-9.9	Welders, cutters, solderers, & brazers	1.6	-12.9
First-line supervisors/managers of production workers	4.6	-18.1	Bookkeeping, accounting, & auditing clerks	1.5	-18.1
Grinding, lapping, polishing machine tool operators	3.3	-20.6	Helpers--Production workers	1.4	-18.1
Cutting, punching, & press machine operators	3.2	-26.3	Sales reps, wholesale & manufacturing, exc tech	1.4	-18.1
Team assemblers	2.9	-18.1	Tool grinders, filers, & sharpeners	1.4	-26.3
Molding, coremaking, & casting machine operators	2.8	-26.3	Numerical tool & process control programmers	1.3	-15.6
Mechanical engineers	2.2	-18.1	Milling & planing machine operators & tenders	1.3	-26.3
General & operations managers	2.0	-26.3	Maintenance & repair workers, general	1.3	-18.1
Inspectors, testers, sorters, samplers, & weighers	2.0	-22.8	Industrial production managers	1.1	-18.1
Mechanical drafters	1.8	-17.2	Janitors & cleaners, exc maids & housekeeping cleaners	1.1	-16.3
Lathe & turning machine tool operators & tenders	1.8	-26.3	Multiple machine tool operators & tenders	1.0	-9.9

INDUSTRY DATA BY STATE
State	Establishments	Shipments			Employment				Cost as % of Shipments	Investment per Employee ($)
State	Establishments	Total ($ mil)	% of U.S.	Per Establ.	Total Number	% of U.S.	Per Establ.	Wages ($/hour)	Cost as % of Shipments	Investment per Employee ($)
Source: 2002 Economic Census. The states are in descending order of shipments or establishments (if shipment data are missing for the majority). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. States marked with (D) are sorted by number of establishments. A dash (-) indicates that the data element cannot be calculated. Data may not show all states active in the NAICS category. All data available at the time of publication are shown.
Michigan	90	574.7	18.2	6,386.1	3,136	17.1	35	21.78	48.9	2,992
California	30	362.6	11.5	12,087.7	2,469	13.4	82	35.39	48.6	1,170
New York	16	314.6	10.0	19,659.5	2,019	11.0	126	21.05	60.6	3,618
Ohio	35	259.8	8.2	7,423.7	1,778	9.7	51	23.97	58.1	1,985
Illinois	30	222.1	7.0	7,402.5	1,237	6.7	41	18.19	46.6	5,201
Connecticut	12	218.2	6.9	18,187.1	905	4.9	75	18.09	52.8	10,109
Wisconsin	28	199.1	6.3	7,111.6	1,242	6.8	44	19.22	46.2	3,527
Pennsylvania	14	115.0	3.6	8,215.7	675	3.7	48	20.78	34.4	1,313
Washington	5	65.1	2.1	13,017.8	292	1.6	58	22.29	39.2	4,092
South Carolina	6	34.0	1.1	5,667.8	247	1.3	41	17.84	42.8	1,405
New Hampshire	4	30.9	1.0	7,721.7	246	1.3	62	18.77	47.2	2,028
Texas	5	23.5	0.7	4,699.0	151	0.8	30	18.53	48.3	4,000

NAICS 333512 - Machine Tool (Metal Cutting Types) Manufacturing

GENERAL STATISTICS
Year	Companies	Establishments		Employment			Compensation		Production ($ million)
		Total	with 20 or more employees	Total (000)	Production		Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
		Total	with 20 or more employees	Total (000)	Workers (000)	Hours (Mil)	Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
Sources: 1997 and 2002 Economic Census; other years, up to 2006, are from Annual Survey of Manufactures. Establishment counts for non-Census years are from County Business Patterns; 1997 and 2002 values are from the 1997 and 2002 censuses, respectively. ‘P's show projections by the editors.
1997	369	401	262	29.4	16.9	35.0	1,268.4	17.83	2,819.7	2,609.4	5,334.9	142.2
1998		460	259	27.5	16.0	32.4	1,196.4	18.30	2,866.8	2,410.2	5,244.0	224.5
1999		456	255	25.5	14.9	30.2	1,159.4	17.90	2,483.5	2,081.0	4,601.6	186.1
2000		487	245	24.9	13.9	28.8	1,152.9	18.74	2,510.5	2,175.3	4,694.9	146.9
2001		519	246	21.6	11.6	23.8	1,035.2	18.52	2,236.1	1,699.4	4,090.1	106.8
2002	342	372	202	18.4	9.4	17.5	875.4	21.15	1,618.7	1,431.9	3,154.0	61.5
2003		557	209	16.3	8.0	17.5	821.6	19.69	1,577.0	1,438.0	3,060.4	45.8
2004		477	194	16.1	8.2	17.6	862.9	20.91	1,803.2	1,639.7	3,442.4	42.4
2005		504	188	16.3	8.8	18.6	917.6	21.79	2,292.4	1,963.2	4,158.1	70.8
2006		516P	177P	18.0	10.0	20.7	1,034.8	22.29	2,753.3	2,195.3	4,830.8	125.3
2007		525P	166P	12.8P	6.2P	13.3P	809.5P	22.55P	1,977.0P	1,576.3P	3,468.7P	38.7P
2008		535P	156P	11.3P	5.2P	11.3P	768.9P	23.06P	1,894.8P	1,510.8P	3,324.6P	24.8P
2009		544P	145P	9.7P	4.2P	9.3P	728.4P	23.58P	1,812.7P	1,445.3P	3,180.5P	10.9P
2010		553P	135P	8.2P	3.2P	7.3P	687.8P	24.10P	1,730.6P	1,379.9P	3,036.4P

INDICES OF CHANGE
Year	Companies	Establishments		Employment			Compensation		Production ($ million)
		Total	with 20 or more employees	Total (000)	Production		Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
		Total	with 20 or more employees	Total (000)	Workers (000)	Hours (Mil)	Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
Sources: Same as General Statistics. Values reflect change from the base year, 2002. Values above 100 mean greater than 2002, values below 100 mean less than 2002, and the values of 100 in other years means the same as 2002. ‘P's show projections by the editors.
1997	108	108	130	160	180	200	145	84	174	182	169	231
1998		124	128	149	170	185	137	87	177	168	166	365
1999		123	126	139	159	173	132	85	153	145	146	303
2000		131	121	135	148	165	132	89	155	152	149	239
2001		140	122	117	123	136	118	88	138	119	130	174
2002	100	100	100	100	100	100	100	100	100	100	100	100
2003		150	103	89	85	100	94	93	97	100	97	74
2004		128	96	88	87	101	99	99	111	115	109	69
2005		135	93	89	94	106	105	103	142	137	132	115
2006		139P	87P	98	106	118	118	105	170	153	153	204
2007		141P	82P	70P	66P	76P	92P	107P	122P	110P	110P	63P
2008		144P	77P	61P	55P	65P	88P	109P	117P	106P	105P	40P
2009		146P	72P	53P	45P	53P	83P	111P	112P	101P	101P	18P
2010		149P	67P	45P	34P	42P	79P	114P	107P	96P	96P

SELECTED RATIOS
For 2002	Avg. of All Manufact.	Analyzed Industry	Index	For 2002	Avg. of All Manufact.	Analyzed Industry	Index
Sources: Same as General Statistics. The ‘Average of All Manufacturing’ column represents the average of all manufacturing industries reported for the most recent complete year available. The Index shows the relationship between the Average and the Analyzed Industry. For example, 100 means that they are equal; 500 that the Analyzed Industry is five times the average; 50 means that the Analyzed Industry is half the national average. The abbreviation ‘na’ is used to show that data are ‘not available’. Ratios shown for 2002, the last complete census year.
Employees per Establishment	42	49	118	Value Added per Production Worker	182,367	152,330	84
Payroll per Establishment	1,639,184	2,353,226	144	Cost per Establishment	5,769,015	4,351,344	75
Payroll per Employee	39,053	47,576	122	Cost per Employee	137,446	87,973	64
Production Workers per Establishment	30	25	86	Cost per Production Worker	195,506	172,202	88
Wages per Establishment	694,845	994,960	143	Shipments per Establishment	11,158,348	8,478,495	76
Wages per Production Worker	23,548	39,375	167	Shipments per Employee	265,847	171,413	64
Hours per Production Worker	1,980	1,862	94	Shipments per Production Worker	378,144	335,532	89
Wages per Hour	11.89	21.15	178	Investment per Establishment	361,338	165,323	46
Value Added per Establishment	5,381,325	3,849,194	72	Investment per Employee	8,609	3,342	39
Value Added per Employee	128,210	77,821	61	Investment per Production Worker	12,245	6,543	53

LEADING COMPANIES Number shown: 75 Total sales ($ mil): 19,695 Total employment (000): 82.8
Company Name	Address				CEO Name	Phone	Co. Type	Sales ($ mil)	Empl. (000)
Source: Ward's Business Directory of U.S. Private and Public Companies, Volumes 1 and 2, 2008. The company type code used is as follows: P - Public, R - Private, S - Subsidiary, D - Division, J - Joint Venture, A - Affiliate, G - Group. Sales are in millions of dollars, employees are in thousands. An asterisk (*) indicates an estimated sales volume. The symbol < stands for ‘less than’. Company names and addresses are truncated, in some cases, to fit into the available space.
Black and Decker Corp.	101 Schilling Rd.	Hunt Valley	MD	21031	Nolan D. Archibald	410-716-3900	P	6,563	25.0
Kennametal Inc.	PO Box 231	Latrobe	PA	15650	Carlos M. Cardoso	724-539-5000	P	2,386	14.0
Regal-Beloit Corp.	200 State St.	Beloit	WI	53511		608-364-8800	P	1,803	17.9
Johnstown Holdings Inc.	545 Central Ave.	Johnstown	PA	15902	John Bolduc	814-535-9000	R	918*	0.2
P.R. Hoffman Machine Products	1517 Commerce	Carlisle	PA	17015		717-243-9900	S	812*	<0.1
Giddings & Lewis Machine Tools	PO Box 590	Fond du Lac	WI	54936		920-921-9400	R	757*	0.4
Makino Inc.	7680 Innovation	Mason	OH	45040		513-573-7200	R	595*	0.2
Thermadyne Holdings Corp.	16052 Swingley	St. Louis	MO	63017	John Michael Bobyck	636-728-3000	P	494	2.9
Gleason Corp.	PO Box 22970	Rochester	NY	14692		585-473-1000	R	350*	2.6
Hercules Energy Manufacturing	16 S Penn. Avenue	Oklahoma City	OK	73107	Jack E. Golsen	405-235-4546	S	332*	1.3
Summit Machinery Co.	PO Box 1402	Oklahoma City	OK	73101	Jack E. Golsen	405-235-2075	S	332*	1.3
Haas Automation Inc.	2800 Sturgis Ave.	Oxnard	CA	93030	Gene Haas	805-278-1800	R	327*	0.8
Hardinge Inc.	PO Box 1507	Elmira	NY	14902	J. Patrick Ervin	607-734-2281	P	327	1.5
Morey Machinery Manufacturing	PO Box 4827	Middletown	NY	10941	Jack E. Golsen	845-343-1851	S	309*	1.2
Gerber Technology Inc.	24 Industrial Park	Tolland	CT	06084	John Hancock	860-871-8082	S	197	1.2
Mazak Corp.	PO Box 970	Florence	KY	41022	Brian Papke	859-342-1222	R	192*	0.5
Manan Medical Products	241 W Palatine Rd.	Wheeling	IL	60090	Werner Mittermeier	847-637-3333	R	191*	1.1
Stark Industrial Inc.	PO Box 3030	North Canton	OH	44720	Ray Wilkof	330-966-8108	R	190*	<0.1
Duo-Fast Corp.	2400 Galvin Dr.	Elgin	IL	60123		847-634-1900	S	136*	0.9
OSG Tap and Die Inc.	676 E Fullerton Ave	Glendale Hts	IL	60139	Gohei Osawa	630-790-1400	R	133*	<0.1
Clausing Industrial Inc.	1819 N Pitcher St.	Kalamazoo	MI	49007		269-345-7155	R	125*	<0.1
JH Fletcher and Co.	PO Box 2187	Huntington	WV	25722	Sammons Duncan	304-525-7811	R	120*	0.2
P and F Industries Inc.	445 Broadhollow	Melville	NY	11747	Richard A. Horowitz	631-694-9800	P	112	0.2
CB Manufacturing and Sales Co.	PO Box 37	West Carrollton	OH	45449	Charlie Biehn	937-866-5986	R	111*	0.1
Iscar Metals Inc.	300 Westway Pl.	Arlington	TX	76018	Jacob Harpaz	817-258-3200	R	95*	<0.1
Networks Electronic Corp.	9750 DeSoto Ave.	Chatsworth	CA	91311	Tamara Christen	818-341-0440	R	73*	0.1
Loos and Company Inc.	PO Box 98	Pomfret	CT	06258	William Loos	860-928-7981	R	71*	0.4
Hypertherm Inc.	PO Box 5010	Hanover	NH	03755	Richard Couch	603-643-3441	R	64*	0.5
Vulcan Engineering Co.	PO Box 307	Helena	AL	35080		205-663-0732	R	62*	0.2
Brinkman Products Inc.	167 Ames Street	Rochester	NY	14611	Robert Brinkman	585-235-4545	R	62*	0.3
A.K. Allen Inc.	PO Box 350	Mineola	NY	11501	A.K. Allen	516-747-5450	R	56*	0.2
Sunnen Products Co.	7910 Manchester	Saint Louis	MO	63143	Matt Kreider	314-781-2100	R	52*	0.5
Regal Cutting Tools	5330 E Rockton Rd.	South Beloit	IL	61080	Gene Zumba		S	50*	0.3
AGIE Ltd.	9009 Perimeter	Charlotte	NC	28216	Glynn Fletcher	704-927-8900	S	46*	<0.1
Fadal Machining Centers L.L.C.	PO Box 2477	Chatsworth	CA	91313	Peter Mosher	818-407-1400	S	45*	0.3
Thielenhaus Microfinish Corp.	42925 W 9 Mile Rd.	Novi	MI	48375	Manfred Sieringhaus	248-349-9450	R	45*	0.3
Continental Machines Inc.	5505 W 123rd St.	Savage	MN	55378	M Johnson	952-890-3300	R	45*	0.2
Mosey Manufacturing Company	262 Fort Wayne	Richmond	IN	47374	George Mosey	765-983-8800	R	43*	<0.1
New York Twist Drill Inc.	PO Box 368	South Beloit	IL	61080	Gene Zimbea		S	42*	0.2
Fastcut Tool Corp.	200 Front St.	Millersburg	PA	17061	Bill Coyle	717-692-8232	S	42*	<0.1
Ashley F. Ward Inc.	7490 Easy St.	Mason	OH	45040		513-398-1414	R	40*	0.3
IMPCO Machine Tools	PO Box 10156	Lansing	MI	48901	Dave Houghton	517-484-9411	R	38*	0.2
Airmar Technology Corp.	35 Meadowbrook	Milford	NH	03055	Stephen Boucher	603-673-9570	R	37*	0.2
Composidie Inc.	1295 State Rte. 380	Apollo	PA	15613	Ted Wohlin	724-727-3466	R	35*	0.2
CRC-Evans Pipeline Int’l	PO Box 50368	Tulsa	OK	74150		918-438-2100	R	35*	0.1
Picut Manufacturing Company	140 Mount Bethel	Warren	NJ	07059	Frederick Picut	908-754-1333	R	35*	<0.1
DTI Lebanon Subsidiary Inc.	PO Box 512	Lebanon	MO	65536	Tom Kowall	417-532-2142	R	33*	0.3
W.A. Whitney Co.	PO Box 1206	Rockford	IL	61105	Gary Geller	815-964-6771	S	33*	0.2
MC Machinery Systems Inc.	1500 Michael Dr.	Wood Dale	IL	60191	Tetsuji Koike	630-860-4210	R	32*	0.2
Kingsbury Corp.	80 Laurel St.	Keene	NH	03431		603-352-5212	R	32*	0.2
Magnetrol International Inc.	5300 Belmont Rd.	Downers Grove	IL	60515		630-969-4000	R	31*	0.3
PMC Industries Corp.	29100 Lakeland	Wickliffe	OH	44092		440-943-3300	S	31*	0.2
Reed-Rico	18 Industrial Dr.	Holden	MA	01520	Bruce Hutchinson	508-829-4491	S	30*	0.3
Moore Tool Company Inc.	PO Box 4088	Bridgeport	CT	06607	Newman Marsilius	203-366-3224	S	29*	0.1
Pmt Group Inc.	800 Union Ave.	Bridgeport	CT	06607	Newman Marsilius	203-367-8675	R	29*	0.1
Hunt Valve Company Inc.	1913 E State St.	Salem	OH	44460	Gerald Bogner	330-337-9535	R	29*	0.2
Rollway Bearing International	PO Box 4827	Syracuse	NY	13221	Bill Eames		S	29*	0.2
Howmet TMP Corp.	3960 S Marginal Rd.	Cleveland	OH	44114	Ray Mitchell	216-391-3885	S	28*	0.2
Romac Industries Inc.	21919 20th Ave. SE	Bothell	WA	98021		425-951-6200	R	28*	0.2
Robbins Co.	29100 Hall St.	Solon	OH	44139	Lok Home	440-248-3303	R	27*	0.1
Tool-Flo Manufacturing Inc.	7803 Hansen Rd.	Houston	TX	77061	Dennis Flolo	713-941-1080	R	26*	0.1
Electronic Hardware Ltd.	PO Box 15039	N Hollywood	CA	91615	Richard Degn	818-982-6100	R	26*	<0.1
Marvel Manufacturing Company	3501 Marvel Dr.	Oshkosh	WI	54902	John Petek	920-236-7200	R	25*	0.2
PMC - Colinet Inc.	29100 Lakeland	Wickliffe	OH	44092	Dwight Perry	440-943-3300	S	25*	0.1
Microbest Inc.	670 Captain Neville	Waterbury	CT	06705	Steven Griffin	203-597-0355	R	25*	0.1
Channel Products Inc.	7100 Wilson Mills	Chesterland	OH	44026		440-423-0113	S	24*	0.1
Carolina Energy Solutions Inc.	244 E Mt Gallant Rd	Rock Hill	SC	29730	Richard Bryant	803-980-3060	R	23*	0.2
Peddinghaus Corp.	300 N Wash. Ave.	Bradley	IL	60915	Michael Sharp	815-937-3800	R	23*	0.2
Gehring Corp.	24800 Drake Rd.	Farmington Hls	MI	48335	Robert Dermolen	248-478-8060	R	23*	<0.1
Hy-Level Industries Inc.	PO Box 368015	Cleveland	OH	44136	Donald Rebar	440-572-1540	R	22*	0.2
Centricut L.L.C.	2 Technology Dr.	West Lebanon	NH	03784		603-298-7849	S	22*	0.1
Self Industries Inc.	3491 Mary Taylor	Birmingham	AL	35235	Michael McDowell	205-655-3284	R	22*	<0.1
Golden States Engineering Inc.	15338 Garfield Ave.	Paramount	CA	90723	Alexandra Rostovski	562-634-3125	R	22*	0.1
Cable West Inc.	276 Preuit Rd.	Wheatland	WY	82201	Donald Nichols	307-322-9214	R	22*	0.1
Wright-K Technology Inc.	2025 E Genesee	Saginaw	MI	48601	John Sivey	989-752-3103	R	22*	0.1

MATERIALS CONSUMED
Material	Quantity	Delivered Cost ($ million)
Source: 2002 Economic Census. Explanation of symbols used: (D): Withheld to avoid disclosure of competitive data; na: Not available; (S): Withheld because statistical norms were not met; (X): Not applicable; (Z): Less than half the unit shown; nec: Not elsewhere classified; nsk: Not specified by kind; - : zero; p : 10-19 percent estimated; q : 20-29 percent estimated.
Fluid power pumps, motors, and hydrostatic transmissions	(X)	13.8
Fluid power cylinders and rotary actuators (hydraulic and pneumatic)	(X)	8.1
Fluid power filters (hydraulic and pneumatic)	(X)	2.4
Fluid power hose, tube fittings, and assemblies (hydraulic and pneumatic)	(X)	7.3
Fluid power valves (hydraulic and pneumatic)	(X)	5.8
Metal bolts, nuts, screws, and other screw machine products	(X)	13.8
Other fabricated metal products (exc. fluid power products and forgings)	(X)	50.0
Forgings	(X)	2.5
Iron and steel castings (rough and semifinished)	(X)	50.2
Nonferrous (aluminum, copper, etc.) castings (rough and semifinished)	(X)	2.8
Steel bars, bar shapes, and plates (exc. castings, forgings, fabr. metal products)	(X)	43.5
Steel sheet and strip (including tinplate)	(X)	(D)
Steel structural shapes (exc. castings, forgings, fabr. metal products)	(X)	(D)
All other steel shapes and forms (exc. castings, forgings, fabr. metal products)	(X)	13.3
Nonferrous shapes and forms	(X)	3.6
Fractional horsepower electric timing motors (less than 1 hp)	(X)	9.0
Other fractional horsepower electric motors (less than 1 hp)	(X)	2.2
Integral horsepower electric motors and generators (1 hp or more)	(X)	12.6
Electrical transmission, distribution, and control equipment	(X)	16.7
Electrical industrial capacitors, resistors, rheostats, and coil windings	(X)	3.3
Numerical controls, metalworking machinery (exc. programmable)	(X)	28.7
Programmable controllers for metalworking machinery	(X)	27.7
Printed circuit assemblies, loaded boards, and modules	(X)	16.2
Printed ciruit boards (without inserted components) for electronic circuitry	(X)	2.3
Semiconductors (incl. transistors, diodes, rectifiers, and integrated circuits), for electronic circuitry	(X)	0.4
All other miscellaneous components and accessories for electronic circuitry (exc. tubes)	(X)	5.4
Electrical instrument mechanisms and meter movements	(X)	6.8
Electronic communication equipment	(X)	0.2
Optical instruments and lenses (exc. sighting, tracking, and fire control)	(X)	0.1
Ball bearings (mounted or unmounted)	(X)	13.7
Roller bearings (mounted or unmounted).	(X)	6.2
Mechanical speed changers, gears, and industrial high-speed drives	(X)	10.2
Wood boxes, pallets, skids, and containers	(X)	4.4
Cutting tools for machine tools	(X)	17.3
Fabricated plastics products (exc. gaskets, hoses, and belting)	(X)	2.9
Paper and paperboard containers (incl. shipping sacks and other paper packaging supplies)	(X)	1.5
All other materials, components, parts, containers, and supplies	(X)	332.9
Materials, ingredients, containers, and supplies, nsk	(X)	382.0

PRODUCT SHARE DETAILS
Product or Product Class Shipments	Mil. $	Product or Product Class Shipments	Mil. $
Source: 2002 Economic Census. The values are product shipments in millions of dollars for 2002. Total product shipments may be lower or higher than industry shipments. See Introduction for a full discussion. Values of indented subcategories are summed in the main heading(s). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. The abbreviation nsk stands for ‘not specified by kind’ and nec for ‘not elsewhere classified’. A dash (-) means zero
MACHINE TOOLS, METAL CUTTING TYPES	2,561.0	nsk	6.0
Metal gear cutting machines	80.2	Parts for metal cutting machine tools (sold separately) and rebuilt and remanufactured metal cutting machine tools	566.2
Metal grinding, polishing, buffing, honing, and lapping machines, except gear-tooth grinding, lapping, polishing, and buffing	312.5	Parts for metal cutting machine tools (sold separately) and rebuilt	505.6
Metal lathes (turning machines) numerically and nonnumerically controlled	182.1	Parts for metal cutting machine tools, sold separately	388.6
Metal milling machines (excluding machining centers)	51.3	Rebuilt metal cutting type machine tools (including machines returned to same configuration they were in when new from factory)	49.5
Machine tools designed primarily for home workshops, labs, garages, etc. (metalworking and primarily metalworking)	78.3	Remanufactured metal cutting type machine tools (including machines in which the original carcass is reused and all possible modern improvements have been incorporated)	67.6
Metal drilling machines designed primarily for home workshops, labs, garages, etc	(D)	Parts for metal cutting machine tools (sold separately) and rebuilt and remanufactured metal cutting machine tools, nsk	60.6
Metal grinding and polishing machines designed primarily for home workshops, labs, garages, etc., including crankshaft regrinding and valve grinding machines	(D)	Metal machining centers (multifunction numerically controlled machines)	382.3
Metal sawing and cut-off machines designed primarily for home workshops, labs, garages, etc	2.9	Metal station type machines	138.5
Other metalworking (or primarily metalworking) machines for home workshops, labs, garages, etc., including automotive cylinder reboring machines and lathes	15.9	Other metal cutting machine tools (except those designed primarily for home workshops, laboratories, garages, etc.)	458.4
Machine tools designed primarily for home workshops, labs, etc. (metalworking and primarily metalworking),		Metal boring machines and drilling machines (excluding machining centers)	114.7
		Machine tools, metal cutting types, nsk, total	196.5

INPUTS AND OUTPUTS FOR METAL CUTTING AND FORMING MACHINE TOOL MANUFACTURING
Economic Sector or Industry Providing Inputs	%	Sector	Economic Sector or Industry Buying Outputs	%	Sector
Source: Benchmark Input-Output Accounts for the U.S. Economy, 2002, U.S. Department of Commerce, Washington D.C., January 2008. User should note that this Input-Output table is not for this particular narrowly defined industry but for a larger aggregate. Input and Output data for Metal Cutting and Forming Machine Tool Manufacturing include Input and Output data for the Annual Survey of Manufactures’ NAICS industries 333512 and 333513. The abbreviation nec stands for ‘not elsewhere classified’.
Compensation of employees	38.8		Private fixed investment	50.8
Management of companies & enterprises	7.2	Services	Exports of goods & services	27.5	Cap Inv
Wholesale trade	4.7	Trade	S/L govt. invest., other	4.7	S/L Govt
Iron & steel mills & ferroalloys	4.5	Manufg.	Plate work & fabricated structural products	3.2	Manufg.
Relay & industrial controls	2.7	Manufg.	Nonferrous metal foundries	1.7	Manufg.
Ferrous metal foundries	2.3	Manufg.	General purpose machinery, nec	1.4	Manufg.
Metal cutting & forming machine tools	2.3	Manufg.	Metal cutting & forming machine tools	1.3	Manufg.
Machine shops	1.9	Manufg.	S/L govt. invest., education	1.3	S/L Govt
Paints & coatings	1.9	Manufg.	Rolling mill & other metalworking machinery	1.3	Manufg.
Ball & roller bearings	1.3	Manufg.	Motor vehicle parts	1.2	Manufg.
Securities, commodity contracts, investments	1.3	Fin/R.E.	Sporting & athletic goods	1.2	Manufg.
Advertising & related services	1.2	Services	Educational services, nec	0.8	Services
Motors & generators	1.1	Manufg.	Federal government, investment, national defense	0.7	Fed Govt
Fluid power process machinery	1.0	Manufg.	Machine shops	0.6	Manufg.
Real estate	1.0	Fin/R.E.	Personal consumption expenditures	0.6
Valve & fittings other than plumbing	1.0	Manufg.	Fabricated metals, nec	0.5	Manufg.
Speed changers, industrial high-speed drives, & gears	1.0	Manufg.	General S/L govt. services	0.5	S/L Govt
Turned products & screws, nuts, & bolts	1.0	Manufg.	Farm machinery & equipment	0.2	Manufg.
Abrasive products	1.0	Manufg.	Warehousing & storage	0.2	Util.
Custom computer programming services	0.9	Services
Cutting tools & machine tool accessories	0.8	Manufg.
Power generation & supply	0.8	Util.
Printed circuit assemblies (electronic assembiles)	0.8	Manufg.
Truck transportation	0.7	Util.
Lessors of nonfinancial assets	0.7	Fin/R.E.
Coating, engraving, heat treating & allied activities	0.6	Manufg.
Noncomparable imports	0.6	Foreign
Taxes on production & imports, less subsidies	0.6
Monetary authorities/depository credit intermediation	0.5	Fin/R.E.
Electronic components, nec	0.5	Manufg.
Telecommunications	0.5	Services
Legal services	0.5	Services
Data processing, hosting, & related services	0.5	Services
Food services & drinking places	0.5	Services
Professional, scientific, technical services, nec	0.5	Services
Postal service	0.5	Util.
Scientific research & development services	0.4	Services
Custom roll forming	0.4	Manufg.
Accounting, tax preparation, bookkeeping, & payroll	0.4	Services
Warehousing & storage	0.4	Util.
Automotive equipment rental & leasing	0.4	Fin/R.E.
Electricity & signal testing instruments	0.3	Manufg.
Wood containers & pallets	0.3	Manufg.
Fabricated metals, nec	0.3	Manufg.
Gold, silver, & other metal ore	0.3	Mining
Hotels & motels, including casino hotels	0.2	Services
Metal cans, boxes, & other containers (light gauge)	0.2	Manufg.
Forging, stamping, & sintering, nec	0.2	Manufg.
Rubber products, nec	0.2	Manufg.
Services to buildings & dwellings	0.2	Services
Plastics products, nec	0.2	Manufg.
Maintenance/repair of nonresidential structures	0.2	Construct.
Commercial & industrial machinery rental & leasing	0.2	Fin/R.E.
Management, scientific, & technical consulting	0.2	Services
Nonmetallic minerals, nec	0.2	Mining
Air transportation	0.2	Util.
Natural gas distribution	0.2	Util.
Crowns & closures & metal stamping	0.2	Manufg.
Other computer related services, including facilities	0.2	Services
Architectural, engineering, & related services	0.2	Services
Plastics packaging materials, film & sheet	0.2	Manufg.
General purpose machinery, nec	0.2	Manufg.
Rail transportation	0.2	Util.
Business support services	0.2	Services
Plate work & fabricated structural products	0.1	Manufg.
Chemical products & preparations, nec	0.1	Manufg.
Handtools	0.1	Manufg.
Nonferrous metal foundries	0.1	Manufg.
Nondepository credit intermediation activities	0.1	Fin/R.E.
Employment services	0.1	Services
Motor vehicle parts	0.1	Manufg.
Paperboard mills	0.1	Manufg.
Automotive repair & maintenance, ex. car washes	0.1	Services
Specialized design services	0.1	Services
Bare printed circuit boards	0.1	Manufg.
Electronic capacitors, resistors, coils, transformers	0.1	Manufg.
Paperboard containers	0.1	Manufg.
Commercial & industrial equipment repair/maintenance	0.1	Services

OCCUPATIONS EMPLOYED BY METALWORKING MACHINERY MANUFACTURING
Occupation	% of Total 2006	Change to 2016	Occupation	% of Total 2006	Change to 2016
Source: Industry-Occupation Matrix, Bureau of Labor Statistics, December 4, 2007. These data are reported based on 4-digit NAICS categories but have been matched to corresponding 6-digit NAICS industry codes. The change reported for each occupation to the year 2016 is a percent of growth or decline as estimated by the Bureau of Labor Statistics. The abbreviation nec stands for ‘not elsewhere classified’.
Machinists	12.8	-14.0	Office clerks, general	1.7	-19.3
Tool & die makers	11.0	-14.0	Shipping, receiving, & traffic clerks	1.6	-21.2
Computer-controlled machine tool operators	5.4	-9.9	Welders, cutters, solderers, & brazers	1.6	-12.9
First-line supervisors/managers of production workers	4.6	-18.1	Bookkeeping, accounting, & auditing clerks	1.5	-18.1
Grinding, lapping, polishing machine tool operators	3.3	-20.6	Helpers--Production workers	1.4	-18.1
Cutting, punching, & press machine operators	3.2	-26.3	Sales reps, wholesale & manufacturing, exc tech	1.4	-18.1
Team assemblers	2.9	-18.1	Tool grinders, filers, & sharpeners	1.4	-26.3
Molding, coremaking, & casting machine operators	2.8	-26.3	Numerical tool & process control programmers	1.3	-15.6
Mechanical engineers	2.2	-18.1	Milling & planing machine operators & tenders	1.3	-26.3
General & operations managers	2.0	-26.3	Maintenance & repair workers, general	1.3	-18.1
Inspectors, testers, sorters, samplers, & weighers	2.0	-22.8	Industrial production managers	1.1	-18.1
Mechanical drafters	1.8	-17.2	Janitors & cleaners, exc maids & housekeeping cleaners	1.1	-16.3
Lathe & turning machine tool operators & tenders	1.8	-26.3	Multiple machine tool operators & tenders	1.0	-9.9

INDUSTRY DATA BY STATE
State	Establishments	Shipments			Employment				Cost as % of Shipments	Investment per Employee ($)
State	Establishments	Total ($ mil)	% of U.S.	Per Establ.	Total Number	% of U.S.	Per Establ.	Wages ($/hour)	Cost as % of Shipments	Investment per Employee ($)
Source: 2002 Economic Census. The states are in descending order of shipments or establishments (if shipment data are missing for the majority). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. States marked with (D) are sorted by number of establishments. A dash (-) indicates that the data element cannot be calculated. Data may not show all states active in the NAICS category. All data available at the time of publication are shown.
Michigan	90	574.7	18.2	6,386.1	3,136	17.1	35	21.78	48.9	2,992
California	30	362.6	11.5	12,087.7	2,469	13.4	82	35.39	48.6	1,170
New York	16	314.6	10.0	19,659.5	2,019	11.0	126	21.05	60.6	3,618
Ohio	35	259.8	8.2	7,423.7	1,778	9.7	51	23.97	58.1	1,985
Illinois	30	222.1	7.0	7,402.5	1,237	6.7	41	18.19	46.6	5,201
Connecticut	12	218.2	6.9	18,187.1	905	4.9	75	18.09	52.8	10,109
Wisconsin	28	199.1	6.3	7,111.6	1,242	6.8	44	19.22	46.2	3,527
Pennsylvania	14	115.0	3.6	8,215.7	675	3.7	48	20.78	34.4	1,313
Washington	5	65.1	2.1	13,017.8	292	1.6	58	22.29	39.2	4,092
South Carolina	6	34.0	1.1	5,667.8	247	1.3	41	17.84	42.8	1,405
New Hampshire	4	30.9	1.0	7,721.7	246	1.3	62	18.77	47.2	2,028
Texas	5	23.5	0.7	4,699.0	151	0.8	30	18.53	48.3	4,000

NAICS 333512 - Machine Tool (Metal Cutting Types) Manufacturing

views updated

NAICS 333512 - Machine Tool (Metal Cutting Types) Manufacturing

GENERAL STATISTICS
Year	Companies	Establishments		Employment			Compensation		Production ($ million)
		Total	with 20 or more employees	Total (000)	Production		Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
		Total	with 20 or more employees	Total (000)	Workers (000)	Hours (Mil)	Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
Sources: 1997 and 2002 Economic Census; other years, up to 2006, are from Annual Survey of Manufactures. Establishment counts for non-Census years are from County Business Patterns; 1997 and 2002 values are from the 1997 and 2002 censuses, respectively. ‘P's show projections by the editors.
1997	369	401	262	29.4	16.9	35.0	1,268.4	17.83	2,819.7	2,609.4	5,334.9	142.2
1998		460	259	27.5	16.0	32.4	1,196.4	18.30	2,866.8	2,410.2	5,244.0	224.5
1999		456	255	25.5	14.9	30.2	1,159.4	17.90	2,483.5	2,081.0	4,601.6	186.1
2000		487	245	24.9	13.9	28.8	1,152.9	18.74	2,510.5	2,175.3	4,694.9	146.9
2001		519	246	21.6	11.6	23.8	1,035.2	18.52	2,236.1	1,699.4	4,090.1	106.8
2002	342	372	202	18.4	9.4	17.5	875.4	21.15	1,618.7	1,431.9	3,154.0	61.5
2003		557	209	16.3	8.0	17.5	821.6	19.69	1,577.0	1,438.0	3,060.4	45.8
2004		477	194	16.1	8.2	17.6	862.9	20.91	1,803.2	1,639.7	3,442.4	42.4
2005		504	188	16.3	8.8	18.6	917.6	21.79	2,292.4	1,963.2	4,158.1	70.8
2006		516P	177P	18.0	10.0	20.7	1,034.8	22.29	2,753.3	2,195.3	4,830.8	125.3
2007		525P	166P	12.8P	6.2P	13.3P	809.5P	22.55P	1,977.0P	1,576.3P	3,468.7P	38.7P
2008		535P	156P	11.3P	5.2P	11.3P	768.9P	23.06P	1,894.8P	1,510.8P	3,324.6P	24.8P
2009		544P	145P	9.7P	4.2P	9.3P	728.4P	23.58P	1,812.7P	1,445.3P	3,180.5P	10.9P
2010		553P	135P	8.2P	3.2P	7.3P	687.8P	24.10P	1,730.6P	1,379.9P	3,036.4P

INDICES OF CHANGE
Year	Companies	Establishments		Employment			Compensation		Production ($ million)
		Total	with 20 or more employees	Total (000)	Production		Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
		Total	with 20 or more employees	Total (000)	Workers (000)	Hours (Mil)	Payroll ($ mil)	Wages ($/hr)	Cost of Materials	Value Added by Manufacture	Value of Shipments	Capital Invest.
Sources: Same as General Statistics. Values reflect change from the base year, 2002. Values above 100 mean greater than 2002, values below 100 mean less than 2002, and the values of 100 in other years means the same as 2002. ‘P's show projections by the editors.
1997	108	108	130	160	180	200	145	84	174	182	169	231
1998		124	128	149	170	185	137	87	177	168	166	365
1999		123	126	139	159	173	132	85	153	145	146	303
2000		131	121	135	148	165	132	89	155	152	149	239
2001		140	122	117	123	136	118	88	138	119	130	174
2002	100	100	100	100	100	100	100	100	100	100	100	100
2003		150	103	89	85	100	94	93	97	100	97	74
2004		128	96	88	87	101	99	99	111	115	109	69
2005		135	93	89	94	106	105	103	142	137	132	115
2006		139P	87P	98	106	118	118	105	170	153	153	204
2007		141P	82P	70P	66P	76P	92P	107P	122P	110P	110P	63P
2008		144P	77P	61P	55P	65P	88P	109P	117P	106P	105P	40P
2009		146P	72P	53P	45P	53P	83P	111P	112P	101P	101P	18P
2010		149P	67P	45P	34P	42P	79P	114P	107P	96P	96P

SELECTED RATIOS
For 2002	Avg. of All Manufact.	Analyzed Industry	Index	For 2002	Avg. of All Manufact.	Analyzed Industry	Index
Sources: Same as General Statistics. The ‘Average of All Manufacturing’ column represents the average of all manufacturing industries reported for the most recent complete year available. The Index shows the relationship between the Average and the Analyzed Industry. For example, 100 means that they are equal; 500 that the Analyzed Industry is five times the average; 50 means that the Analyzed Industry is half the national average. The abbreviation ‘na’ is used to show that data are ‘not available’. Ratios shown for 2002, the last complete census year.
Employees per Establishment	42	49	118	Value Added per Production Worker	182,367	152,330	84
Payroll per Establishment	1,639,184	2,353,226	144	Cost per Establishment	5,769,015	4,351,344	75
Payroll per Employee	39,053	47,576	122	Cost per Employee	137,446	87,973	64
Production Workers per Establishment	30	25	86	Cost per Production Worker	195,506	172,202	88
Wages per Establishment	694,845	994,960	143	Shipments per Establishment	11,158,348	8,478,495	76
Wages per Production Worker	23,548	39,375	167	Shipments per Employee	265,847	171,413	64
Hours per Production Worker	1,980	1,862	94	Shipments per Production Worker	378,144	335,532	89
Wages per Hour	11.89	21.15	178	Investment per Establishment	361,338	165,323	46
Value Added per Establishment	5,381,325	3,849,194	72	Investment per Employee	8,609	3,342	39
Value Added per Employee	128,210	77,821	61	Investment per Production Worker	12,245	6,543	53

LEADING COMPANIES Number shown: 75 Total sales ($ mil): 19,695 Total employment (000): 82.8
Company Name	Address				CEO Name	Phone	Co. Type	Sales ($ mil)	Empl. (000)
Source: Ward's Business Directory of U.S. Private and Public Companies, Volumes 1 and 2, 2008. The company type code used is as follows: P - Public, R - Private, S - Subsidiary, D - Division, J - Joint Venture, A - Affiliate, G - Group. Sales are in millions of dollars, employees are in thousands. An asterisk (*) indicates an estimated sales volume. The symbol < stands for ‘less than’. Company names and addresses are truncated, in some cases, to fit into the available space.
Black and Decker Corp.	101 Schilling Rd.	Hunt Valley	MD	21031	Nolan D. Archibald	410-716-3900	P	6,563	25.0
Kennametal Inc.	PO Box 231	Latrobe	PA	15650	Carlos M. Cardoso	724-539-5000	P	2,386	14.0
Regal-Beloit Corp.	200 State St.	Beloit	WI	53511		608-364-8800	P	1,803	17.9
Johnstown Holdings Inc.	545 Central Ave.	Johnstown	PA	15902	John Bolduc	814-535-9000	R	918*	0.2
P.R. Hoffman Machine Products	1517 Commerce	Carlisle	PA	17015		717-243-9900	S	812*	<0.1
Giddings & Lewis Machine Tools	PO Box 590	Fond du Lac	WI	54936		920-921-9400	R	757*	0.4
Makino Inc.	7680 Innovation	Mason	OH	45040		513-573-7200	R	595*	0.2
Thermadyne Holdings Corp.	16052 Swingley	St. Louis	MO	63017	John Michael Bobyck	636-728-3000	P	494	2.9
Gleason Corp.	PO Box 22970	Rochester	NY	14692		585-473-1000	R	350*	2.6
Hercules Energy Manufacturing	16 S Penn. Avenue	Oklahoma City	OK	73107	Jack E. Golsen	405-235-4546	S	332*	1.3
Summit Machinery Co.	PO Box 1402	Oklahoma City	OK	73101	Jack E. Golsen	405-235-2075	S	332*	1.3
Haas Automation Inc.	2800 Sturgis Ave.	Oxnard	CA	93030	Gene Haas	805-278-1800	R	327*	0.8
Hardinge Inc.	PO Box 1507	Elmira	NY	14902	J. Patrick Ervin	607-734-2281	P	327	1.5
Morey Machinery Manufacturing	PO Box 4827	Middletown	NY	10941	Jack E. Golsen	845-343-1851	S	309*	1.2
Gerber Technology Inc.	24 Industrial Park	Tolland	CT	06084	John Hancock	860-871-8082	S	197	1.2
Mazak Corp.	PO Box 970	Florence	KY	41022	Brian Papke	859-342-1222	R	192*	0.5
Manan Medical Products	241 W Palatine Rd.	Wheeling	IL	60090	Werner Mittermeier	847-637-3333	R	191*	1.1
Stark Industrial Inc.	PO Box 3030	North Canton	OH	44720	Ray Wilkof	330-966-8108	R	190*	<0.1
Duo-Fast Corp.	2400 Galvin Dr.	Elgin	IL	60123		847-634-1900	S	136*	0.9
OSG Tap and Die Inc.	676 E Fullerton Ave	Glendale Hts	IL	60139	Gohei Osawa	630-790-1400	R	133*	<0.1
Clausing Industrial Inc.	1819 N Pitcher St.	Kalamazoo	MI	49007		269-345-7155	R	125*	<0.1
JH Fletcher and Co.	PO Box 2187	Huntington	WV	25722	Sammons Duncan	304-525-7811	R	120*	0.2
P and F Industries Inc.	445 Broadhollow	Melville	NY	11747	Richard A. Horowitz	631-694-9800	P	112	0.2
CB Manufacturing and Sales Co.	PO Box 37	West Carrollton	OH	45449	Charlie Biehn	937-866-5986	R	111*	0.1
Iscar Metals Inc.	300 Westway Pl.	Arlington	TX	76018	Jacob Harpaz	817-258-3200	R	95*	<0.1
Networks Electronic Corp.	9750 DeSoto Ave.	Chatsworth	CA	91311	Tamara Christen	818-341-0440	R	73*	0.1
Loos and Company Inc.	PO Box 98	Pomfret	CT	06258	William Loos	860-928-7981	R	71*	0.4
Hypertherm Inc.	PO Box 5010	Hanover	NH	03755	Richard Couch	603-643-3441	R	64*	0.5
Vulcan Engineering Co.	PO Box 307	Helena	AL	35080		205-663-0732	R	62*	0.2
Brinkman Products Inc.	167 Ames Street	Rochester	NY	14611	Robert Brinkman	585-235-4545	R	62*	0.3
A.K. Allen Inc.	PO Box 350	Mineola	NY	11501	A.K. Allen	516-747-5450	R	56*	0.2
Sunnen Products Co.	7910 Manchester	Saint Louis	MO	63143	Matt Kreider	314-781-2100	R	52*	0.5
Regal Cutting Tools	5330 E Rockton Rd.	South Beloit	IL	61080	Gene Zumba		S	50*	0.3
AGIE Ltd.	9009 Perimeter	Charlotte	NC	28216	Glynn Fletcher	704-927-8900	S	46*	<0.1
Fadal Machining Centers L.L.C.	PO Box 2477	Chatsworth	CA	91313	Peter Mosher	818-407-1400	S	45*	0.3
Thielenhaus Microfinish Corp.	42925 W 9 Mile Rd.	Novi	MI	48375	Manfred Sieringhaus	248-349-9450	R	45*	0.3
Continental Machines Inc.	5505 W 123rd St.	Savage	MN	55378	M Johnson	952-890-3300	R	45*	0.2
Mosey Manufacturing Company	262 Fort Wayne	Richmond	IN	47374	George Mosey	765-983-8800	R	43*	<0.1
New York Twist Drill Inc.	PO Box 368	South Beloit	IL	61080	Gene Zimbea		S	42*	0.2
Fastcut Tool Corp.	200 Front St.	Millersburg	PA	17061	Bill Coyle	717-692-8232	S	42*	<0.1
Ashley F. Ward Inc.	7490 Easy St.	Mason	OH	45040		513-398-1414	R	40*	0.3
IMPCO Machine Tools	PO Box 10156	Lansing	MI	48901	Dave Houghton	517-484-9411	R	38*	0.2
Airmar Technology Corp.	35 Meadowbrook	Milford	NH	03055	Stephen Boucher	603-673-9570	R	37*	0.2
Composidie Inc.	1295 State Rte. 380	Apollo	PA	15613	Ted Wohlin	724-727-3466	R	35*	0.2
CRC-Evans Pipeline Int’l	PO Box 50368	Tulsa	OK	74150		918-438-2100	R	35*	0.1
Picut Manufacturing Company	140 Mount Bethel	Warren	NJ	07059	Frederick Picut	908-754-1333	R	35*	<0.1
DTI Lebanon Subsidiary Inc.	PO Box 512	Lebanon	MO	65536	Tom Kowall	417-532-2142	R	33*	0.3
W.A. Whitney Co.	PO Box 1206	Rockford	IL	61105	Gary Geller	815-964-6771	S	33*	0.2
MC Machinery Systems Inc.	1500 Michael Dr.	Wood Dale	IL	60191	Tetsuji Koike	630-860-4210	R	32*	0.2
Kingsbury Corp.	80 Laurel St.	Keene	NH	03431		603-352-5212	R	32*	0.2
Magnetrol International Inc.	5300 Belmont Rd.	Downers Grove	IL	60515		630-969-4000	R	31*	0.3
PMC Industries Corp.	29100 Lakeland	Wickliffe	OH	44092		440-943-3300	S	31*	0.2
Reed-Rico	18 Industrial Dr.	Holden	MA	01520	Bruce Hutchinson	508-829-4491	S	30*	0.3
Moore Tool Company Inc.	PO Box 4088	Bridgeport	CT	06607	Newman Marsilius	203-366-3224	S	29*	0.1
Pmt Group Inc.	800 Union Ave.	Bridgeport	CT	06607	Newman Marsilius	203-367-8675	R	29*	0.1
Hunt Valve Company Inc.	1913 E State St.	Salem	OH	44460	Gerald Bogner	330-337-9535	R	29*	0.2
Rollway Bearing International	PO Box 4827	Syracuse	NY	13221	Bill Eames		S	29*	0.2
Howmet TMP Corp.	3960 S Marginal Rd.	Cleveland	OH	44114	Ray Mitchell	216-391-3885	S	28*	0.2
Romac Industries Inc.	21919 20th Ave. SE	Bothell	WA	98021		425-951-6200	R	28*	0.2
Robbins Co.	29100 Hall St.	Solon	OH	44139	Lok Home	440-248-3303	R	27*	0.1
Tool-Flo Manufacturing Inc.	7803 Hansen Rd.	Houston	TX	77061	Dennis Flolo	713-941-1080	R	26*	0.1
Electronic Hardware Ltd.	PO Box 15039	N Hollywood	CA	91615	Richard Degn	818-982-6100	R	26*	<0.1
Marvel Manufacturing Company	3501 Marvel Dr.	Oshkosh	WI	54902	John Petek	920-236-7200	R	25*	0.2
PMC - Colinet Inc.	29100 Lakeland	Wickliffe	OH	44092	Dwight Perry	440-943-3300	S	25*	0.1
Microbest Inc.	670 Captain Neville	Waterbury	CT	06705	Steven Griffin	203-597-0355	R	25*	0.1
Channel Products Inc.	7100 Wilson Mills	Chesterland	OH	44026		440-423-0113	S	24*	0.1
Carolina Energy Solutions Inc.	244 E Mt Gallant Rd	Rock Hill	SC	29730	Richard Bryant	803-980-3060	R	23*	0.2
Peddinghaus Corp.	300 N Wash. Ave.	Bradley	IL	60915	Michael Sharp	815-937-3800	R	23*	0.2
Gehring Corp.	24800 Drake Rd.	Farmington Hls	MI	48335	Robert Dermolen	248-478-8060	R	23*	<0.1
Hy-Level Industries Inc.	PO Box 368015	Cleveland	OH	44136	Donald Rebar	440-572-1540	R	22*	0.2
Centricut L.L.C.	2 Technology Dr.	West Lebanon	NH	03784		603-298-7849	S	22*	0.1
Self Industries Inc.	3491 Mary Taylor	Birmingham	AL	35235	Michael McDowell	205-655-3284	R	22*	<0.1
Golden States Engineering Inc.	15338 Garfield Ave.	Paramount	CA	90723	Alexandra Rostovski	562-634-3125	R	22*	0.1
Cable West Inc.	276 Preuit Rd.	Wheatland	WY	82201	Donald Nichols	307-322-9214	R	22*	0.1
Wright-K Technology Inc.	2025 E Genesee	Saginaw	MI	48601	John Sivey	989-752-3103	R	22*	0.1

MATERIALS CONSUMED
Material	Quantity	Delivered Cost ($ million)
Source: 2002 Economic Census. Explanation of symbols used: (D): Withheld to avoid disclosure of competitive data; na: Not available; (S): Withheld because statistical norms were not met; (X): Not applicable; (Z): Less than half the unit shown; nec: Not elsewhere classified; nsk: Not specified by kind; - : zero; p : 10-19 percent estimated; q : 20-29 percent estimated.
Fluid power pumps, motors, and hydrostatic transmissions	(X)	13.8
Fluid power cylinders and rotary actuators (hydraulic and pneumatic)	(X)	8.1
Fluid power filters (hydraulic and pneumatic)	(X)	2.4
Fluid power hose, tube fittings, and assemblies (hydraulic and pneumatic)	(X)	7.3
Fluid power valves (hydraulic and pneumatic)	(X)	5.8
Metal bolts, nuts, screws, and other screw machine products	(X)	13.8
Other fabricated metal products (exc. fluid power products and forgings)	(X)	50.0
Forgings	(X)	2.5
Iron and steel castings (rough and semifinished)	(X)	50.2
Nonferrous (aluminum, copper, etc.) castings (rough and semifinished)	(X)	2.8
Steel bars, bar shapes, and plates (exc. castings, forgings, fabr. metal products)	(X)	43.5
Steel sheet and strip (including tinplate)	(X)	(D)
Steel structural shapes (exc. castings, forgings, fabr. metal products)	(X)	(D)
All other steel shapes and forms (exc. castings, forgings, fabr. metal products)	(X)	13.3
Nonferrous shapes and forms	(X)	3.6
Fractional horsepower electric timing motors (less than 1 hp)	(X)	9.0
Other fractional horsepower electric motors (less than 1 hp)	(X)	2.2
Integral horsepower electric motors and generators (1 hp or more)	(X)	12.6
Electrical transmission, distribution, and control equipment	(X)	16.7
Electrical industrial capacitors, resistors, rheostats, and coil windings	(X)	3.3
Numerical controls, metalworking machinery (exc. programmable)	(X)	28.7
Programmable controllers for metalworking machinery	(X)	27.7
Printed circuit assemblies, loaded boards, and modules	(X)	16.2
Printed ciruit boards (without inserted components) for electronic circuitry	(X)	2.3
Semiconductors (incl. transistors, diodes, rectifiers, and integrated circuits), for electronic circuitry	(X)	0.4
All other miscellaneous components and accessories for electronic circuitry (exc. tubes)	(X)	5.4
Electrical instrument mechanisms and meter movements	(X)	6.8
Electronic communication equipment	(X)	0.2
Optical instruments and lenses (exc. sighting, tracking, and fire control)	(X)	0.1
Ball bearings (mounted or unmounted)	(X)	13.7
Roller bearings (mounted or unmounted).	(X)	6.2
Mechanical speed changers, gears, and industrial high-speed drives	(X)	10.2
Wood boxes, pallets, skids, and containers	(X)	4.4
Cutting tools for machine tools	(X)	17.3
Fabricated plastics products (exc. gaskets, hoses, and belting)	(X)	2.9
Paper and paperboard containers (incl. shipping sacks and other paper packaging supplies)	(X)	1.5
All other materials, components, parts, containers, and supplies	(X)	332.9
Materials, ingredients, containers, and supplies, nsk	(X)	382.0

PRODUCT SHARE DETAILS
Product or Product Class Shipments	Mil. $	Product or Product Class Shipments	Mil. $
Source: 2002 Economic Census. The values are product shipments in millions of dollars for 2002. Total product shipments may be lower or higher than industry shipments. See Introduction for a full discussion. Values of indented subcategories are summed in the main heading(s). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. The abbreviation nsk stands for ‘not specified by kind’ and nec for ‘not elsewhere classified’. A dash (-) means zero
MACHINE TOOLS, METAL CUTTING TYPES	2,561.0	nsk	6.0
Metal gear cutting machines	80.2	Parts for metal cutting machine tools (sold separately) and rebuilt and remanufactured metal cutting machine tools	566.2
Metal grinding, polishing, buffing, honing, and lapping machines, except gear-tooth grinding, lapping, polishing, and buffing	312.5	Parts for metal cutting machine tools (sold separately) and rebuilt	505.6
Metal lathes (turning machines) numerically and nonnumerically controlled	182.1	Parts for metal cutting machine tools, sold separately	388.6
Metal milling machines (excluding machining centers)	51.3	Rebuilt metal cutting type machine tools (including machines returned to same configuration they were in when new from factory)	49.5
Machine tools designed primarily for home workshops, labs, garages, etc. (metalworking and primarily metalworking)	78.3	Remanufactured metal cutting type machine tools (including machines in which the original carcass is reused and all possible modern improvements have been incorporated)	67.6
Metal drilling machines designed primarily for home workshops, labs, garages, etc	(D)	Parts for metal cutting machine tools (sold separately) and rebuilt and remanufactured metal cutting machine tools, nsk	60.6
Metal grinding and polishing machines designed primarily for home workshops, labs, garages, etc., including crankshaft regrinding and valve grinding machines	(D)	Metal machining centers (multifunction numerically controlled machines)	382.3
Metal sawing and cut-off machines designed primarily for home workshops, labs, garages, etc	2.9	Metal station type machines	138.5
Other metalworking (or primarily metalworking) machines for home workshops, labs, garages, etc., including automotive cylinder reboring machines and lathes	15.9	Other metal cutting machine tools (except those designed primarily for home workshops, laboratories, garages, etc.)	458.4
Machine tools designed primarily for home workshops, labs, etc. (metalworking and primarily metalworking),		Metal boring machines and drilling machines (excluding machining centers)	114.7
		Machine tools, metal cutting types, nsk, total	196.5

INPUTS AND OUTPUTS FOR METAL CUTTING AND FORMING MACHINE TOOL MANUFACTURING
Economic Sector or Industry Providing Inputs	%	Sector	Economic Sector or Industry Buying Outputs	%	Sector
Source: Benchmark Input-Output Accounts for the U.S. Economy, 2002, U.S. Department of Commerce, Washington D.C., January 2008. User should note that this Input-Output table is not for this particular narrowly defined industry but for a larger aggregate. Input and Output data for Metal Cutting and Forming Machine Tool Manufacturing include Input and Output data for the Annual Survey of Manufactures’ NAICS industries 333512 and 333513. The abbreviation nec stands for ‘not elsewhere classified’.
Compensation of employees	38.8		Private fixed investment	50.8
Management of companies & enterprises	7.2	Services	Exports of goods & services	27.5	Cap Inv
Wholesale trade	4.7	Trade	S/L govt. invest., other	4.7	S/L Govt
Iron & steel mills & ferroalloys	4.5	Manufg.	Plate work & fabricated structural products	3.2	Manufg.
Relay & industrial controls	2.7	Manufg.	Nonferrous metal foundries	1.7	Manufg.
Ferrous metal foundries	2.3	Manufg.	General purpose machinery, nec	1.4	Manufg.
Metal cutting & forming machine tools	2.3	Manufg.	Metal cutting & forming machine tools	1.3	Manufg.
Machine shops	1.9	Manufg.	S/L govt. invest., education	1.3	S/L Govt
Paints & coatings	1.9	Manufg.	Rolling mill & other metalworking machinery	1.3	Manufg.
Ball & roller bearings	1.3	Manufg.	Motor vehicle parts	1.2	Manufg.
Securities, commodity contracts, investments	1.3	Fin/R.E.	Sporting & athletic goods	1.2	Manufg.
Advertising & related services	1.2	Services	Educational services, nec	0.8	Services
Motors & generators	1.1	Manufg.	Federal government, investment, national defense	0.7	Fed Govt
Fluid power process machinery	1.0	Manufg.	Machine shops	0.6	Manufg.
Real estate	1.0	Fin/R.E.	Personal consumption expenditures	0.6
Valve & fittings other than plumbing	1.0	Manufg.	Fabricated metals, nec	0.5	Manufg.
Speed changers, industrial high-speed drives, & gears	1.0	Manufg.	General S/L govt. services	0.5	S/L Govt
Turned products & screws, nuts, & bolts	1.0	Manufg.	Farm machinery & equipment	0.2	Manufg.
Abrasive products	1.0	Manufg.	Warehousing & storage	0.2	Util.
Custom computer programming services	0.9	Services
Cutting tools & machine tool accessories	0.8	Manufg.
Power generation & supply	0.8	Util.
Printed circuit assemblies (electronic assembiles)	0.8	Manufg.
Truck transportation	0.7	Util.
Lessors of nonfinancial assets	0.7	Fin/R.E.
Coating, engraving, heat treating & allied activities	0.6	Manufg.
Noncomparable imports	0.6	Foreign
Taxes on production & imports, less subsidies	0.6
Monetary authorities/depository credit intermediation	0.5	Fin/R.E.
Electronic components, nec	0.5	Manufg.
Telecommunications	0.5	Services
Legal services	0.5	Services
Data processing, hosting, & related services	0.5	Services
Food services & drinking places	0.5	Services
Professional, scientific, technical services, nec	0.5	Services
Postal service	0.5	Util.
Scientific research & development services	0.4	Services
Custom roll forming	0.4	Manufg.
Accounting, tax preparation, bookkeeping, & payroll	0.4	Services
Warehousing & storage	0.4	Util.
Automotive equipment rental & leasing	0.4	Fin/R.E.
Electricity & signal testing instruments	0.3	Manufg.
Wood containers & pallets	0.3	Manufg.
Fabricated metals, nec	0.3	Manufg.
Gold, silver, & other metal ore	0.3	Mining
Hotels & motels, including casino hotels	0.2	Services
Metal cans, boxes, & other containers (light gauge)	0.2	Manufg.
Forging, stamping, & sintering, nec	0.2	Manufg.
Rubber products, nec	0.2	Manufg.
Services to buildings & dwellings	0.2	Services
Plastics products, nec	0.2	Manufg.
Maintenance/repair of nonresidential structures	0.2	Construct.
Commercial & industrial machinery rental & leasing	0.2	Fin/R.E.
Management, scientific, & technical consulting	0.2	Services
Nonmetallic minerals, nec	0.2	Mining
Air transportation	0.2	Util.
Natural gas distribution	0.2	Util.
Crowns & closures & metal stamping	0.2	Manufg.
Other computer related services, including facilities	0.2	Services
Architectural, engineering, & related services	0.2	Services
Plastics packaging materials, film & sheet	0.2	Manufg.
General purpose machinery, nec	0.2	Manufg.
Rail transportation	0.2	Util.
Business support services	0.2	Services
Plate work & fabricated structural products	0.1	Manufg.
Chemical products & preparations, nec	0.1	Manufg.
Handtools	0.1	Manufg.
Nonferrous metal foundries	0.1	Manufg.
Nondepository credit intermediation activities	0.1	Fin/R.E.
Employment services	0.1	Services
Motor vehicle parts	0.1	Manufg.
Paperboard mills	0.1	Manufg.
Automotive repair & maintenance, ex. car washes	0.1	Services
Specialized design services	0.1	Services
Bare printed circuit boards	0.1	Manufg.
Electronic capacitors, resistors, coils, transformers	0.1	Manufg.
Paperboard containers	0.1	Manufg.
Commercial & industrial equipment repair/maintenance	0.1	Services

OCCUPATIONS EMPLOYED BY METALWORKING MACHINERY MANUFACTURING
Occupation	% of Total 2006	Change to 2016	Occupation	% of Total 2006	Change to 2016
Source: Industry-Occupation Matrix, Bureau of Labor Statistics, December 4, 2007. These data are reported based on 4-digit NAICS categories but have been matched to corresponding 6-digit NAICS industry codes. The change reported for each occupation to the year 2016 is a percent of growth or decline as estimated by the Bureau of Labor Statistics. The abbreviation nec stands for ‘not elsewhere classified’.
Machinists	12.8	-14.0	Office clerks, general	1.7	-19.3
Tool & die makers	11.0	-14.0	Shipping, receiving, & traffic clerks	1.6	-21.2
Computer-controlled machine tool operators	5.4	-9.9	Welders, cutters, solderers, & brazers	1.6	-12.9
First-line supervisors/managers of production workers	4.6	-18.1	Bookkeeping, accounting, & auditing clerks	1.5	-18.1
Grinding, lapping, polishing machine tool operators	3.3	-20.6	Helpers--Production workers	1.4	-18.1
Cutting, punching, & press machine operators	3.2	-26.3	Sales reps, wholesale & manufacturing, exc tech	1.4	-18.1
Team assemblers	2.9	-18.1	Tool grinders, filers, & sharpeners	1.4	-26.3
Molding, coremaking, & casting machine operators	2.8	-26.3	Numerical tool & process control programmers	1.3	-15.6
Mechanical engineers	2.2	-18.1	Milling & planing machine operators & tenders	1.3	-26.3
General & operations managers	2.0	-26.3	Maintenance & repair workers, general	1.3	-18.1
Inspectors, testers, sorters, samplers, & weighers	2.0	-22.8	Industrial production managers	1.1	-18.1
Mechanical drafters	1.8	-17.2	Janitors & cleaners, exc maids & housekeeping cleaners	1.1	-16.3
Lathe & turning machine tool operators & tenders	1.8	-26.3	Multiple machine tool operators & tenders	1.0	-9.9

INDUSTRY DATA BY STATE
State	Establishments	Shipments			Employment				Cost as % of Shipments	Investment per Employee ($)
State	Establishments	Total ($ mil)	% of U.S.	Per Establ.	Total Number	% of U.S.	Per Establ.	Wages ($/hour)	Cost as % of Shipments	Investment per Employee ($)
Source: 2002 Economic Census. The states are in descending order of shipments or establishments (if shipment data are missing for the majority). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. States marked with (D) are sorted by number of establishments. A dash (-) indicates that the data element cannot be calculated. Data may not show all states active in the NAICS category. All data available at the time of publication are shown.
Michigan	90	574.7	18.2	6,386.1	3,136	17.1	35	21.78	48.9	2,992
California	30	362.6	11.5	12,087.7	2,469	13.4	82	35.39	48.6	1,170
New York	16	314.6	10.0	19,659.5	2,019	11.0	126	21.05	60.6	3,618
Ohio	35	259.8	8.2	7,423.7	1,778	9.7	51	23.97	58.1	1,985
Illinois	30	222.1	7.0	7,402.5	1,237	6.7	41	18.19	46.6	5,201
Connecticut	12	218.2	6.9	18,187.1	905	4.9	75	18.09	52.8	10,109
Wisconsin	28	199.1	6.3	7,111.6	1,242	6.8	44	19.22	46.2	3,527
Pennsylvania	14	115.0	3.6	8,215.7	675	3.7	48	20.78	34.4	1,313
Washington	5	65.1	2.1	13,017.8	292	1.6	58	22.29	39.2	4,092
South Carolina	6	34.0	1.1	5,667.8	247	1.3	41	17.84	42.8	1,405
New Hampshire	4	30.9	1.0	7,721.7	246	1.3	62	18.77	47.2	2,028
Texas	5	23.5	0.7	4,699.0	151	0.8	30	18.53	48.3	4,000