NAICS 333513 - Machine Tool (Metal Forming Types) Manufacturing

views updated

NAICS 333513 - Machine Tool (Metal Forming Types) Manufacturing

GENERAL STATISTICS
YearCompaniesEstablishmentsEmploymentCompensationProduction ($ million)
Totalwith 20 or more employeesTotal (000)ProductionPayroll ($ mil)Wages ($/hr)Cost of MaterialsValue Added by ManufactureValue of ShipmentsCapital Invest.
Workers (000)Hours (Mil)
Sources: 1992, 1997, 2002 Economic Census; other years, up to 2006, are from the Annual Survey of Manufactures. Establishment counts for non-Census years are from County Business Patterns; 1997 and 2002 values are from the 1997 and 2002 censuses respectively, reported in the Federal Government's NAICS format. Other years were originally reported in equivalent SIC format. ‘P's show projections by the editors.
1991 28012513.58.517.7443.514.30746.5636.41,505.531.6
199221121711412.27.815.8417.614.99700.1728.61,450.940.4
1993 22910912.77.816.7461.915.68833.4872.41,712.732.7
1994 25811213.18.317.5475.315.91769.8922.01,694.325.4
1995 27711713.48.518.5511.516.22910.31,165.91,982.256.1
1996 34312413.58.518.6524.716.52940.91,262.42,213.352.0
199722022514414.29.118.8598.618.37961.51,289.62,255.092.0
1998 25715015.29.619.0640.719.16951.11,439.62,308.9102.9
1999 25715413.58.718.0596.018.32909.91,274.52,190.768.1
2000 26914913.38.618.0598.418.69938.41,248.12,169.454.2
2001 28713511.77.214.8504.418.22758.4961.21,784.936.8
2002169178987.34.28.4341.220.72479.7637.81,117.428.6
2003 3111187.64.59.2368.720.20510.7654.41,168.214.1
2004 2791047.14.49.5368.420.73534.7709.31,231.723.8
2005 2881106.84.59.8354.119.54580.5756.41,325.234.0
2006 276P122P7.24.710.1375.820.73683.2815.81,503.122.3
2007 278P122P7.2P4.5P9.5P409.2P21.64P669.3P799.2P1,472.5P34.2P
2008 279P122P6.8P4.2P8.9P401.6P22.07P655.7P783.0P1,442.7P33.0P
2009 281P122P6.3P3.9P8.2P394.0P22.49P642.2P766.8P1,412.9P31.7P
2010 282P122P5.8P3.6P7.6P386.4P22.92P628.7P750.7P1,383.1P30.5P
INDICES OF CHANGE
YearCompaniesEstablishmentsEmploymentCompensationProduction ($ million)
Totalwith 20 or more employeesTotal (000)ProductionPayroll ($ mil)Wages ($/hr)Cost of MaterialsValue Added by ManufactureValue of ShipmentsCapital Invest.
Workers (000)Hours (Mil)
Sources: Same as General Statistics. Values reflect change from the base year, 2002. Values above 100 mean greater than 2002, values below 100 mean less than 2002, and the values of 100 in other years means the same as 2002. ‘P's show projections by the editors.
199212512211616718618812272146114130141
199713012614719521722417589200202202322
2001 16113816017117614888158151160129
2002100100100100100100100100100100100100
2003 1751201041071101089710610310549
2004 1571069710511310810011111111083
2005 1621129310711710494121119119119
2006 155P125P9911212011010014212813578
2007 156P125P99P107P113P120P104P140P125P132P120P
2008 157P124P93P100P106P118P107P137P123P129P115P
2009 158P124P86P93P98P115P109P134P120P126P111P
2010 159P124P79P86P90P113P111P131P118P124P107P
SELECTED RATIOS
For 2002Avg. of All Manufact.Analyzed IndustryIndexFor 2002Avg. of All Manufact.Analyzed IndustryIndex
Sources: Same as General Statistics. The ‘Average of All Manufacturing’ column represents the average of all manufacturing industries reported for the most recent complete year available. The Index shows the relationship between the Average and the Analyzed Industry. For example, 100 means that they are equal; 500 that the Analyzed Industry is five times the average; 50 means that the Analyzed Industry is half the national average. The abbreviation ‘na’ is used to show that data are ‘not available’. Ratios shown for 2002, the last complete census year.
Employees per Establishment424198Value Added per Production Worker182,367151,85783
Payroll per Establishment1,639,1841,916,854117Cost per Establishment5,769,0152,694,94447
Payroll per Employee39,05346,740120Cost per Employee137,44665,71248
Production Workers per Establishment302480Cost per Production Worker195,506114,21458
Wages per Establishment694,845977,798141Shipments per Establishment11,158,3486,277,52856
Wages per Production Worker23,54841,440176Shipments per Employee265,847153,06858
Hours per Production Worker1,9802,000101Shipments per Production Worker378,144266,04870
Wages per Hour11.8920.72174Investment per Establishment361,338160,67444
Value Added per Establishment5,381,3253,583,14667Investment per Employee8,6093,91846
Value Added per Employee128,21087,37068Investment per Production Worker12,2456,81056
LEADING COMPANIES Number shown: 75 Total sales ($ mil): 6,824 Total employment (000): 22.6
Company NameAddress   CEO NamePhoneCo. TypeSales ($ mil)Empl. (000)
Source: Ward's Business Directory of U.S. Private and Public Companies, Volumes 1 and 2, 2008. The company type code used is as follows: P - Public, R - Private, S - Subsidiary, D - Division, J - Joint Venture, A - Affiliate, G - Group. Sales are in millions of dollars, employees are in thousands. An asterisk (*) indicates an estimated sales volume. The symbol < stands for ‘less than’. Company names and addresses are truncated, in some cases, to fit into the available space.
Metaldyne Corp.47603 Halyard Dr.PlymouthMI48170Thomas Amato734-207-6200S1,8868.0
Saurer Holding Inc.1575 W 124th Ave.DenverCO80234Peter Kern303-457-1234R1,850*0.2
Gleason Corp.PO Box 22970RochesterNY14692 585-473-1000R350*2.6
Haas Automation Inc.2800 Sturgis Ave.OxnardCA93030Gene Haas805-278-1800R327*0.8
Danieli Corp.800 Cranberry WdsCranberry TwpPA16066Mark Brandon724-778-5400R306*<0.1
Trumpf Inc.111 Hyde Rd.FarmingtonCT06032Rolf Biekert860-255-6000S278*0.6
Duo-Fast Corp.2400 Galvin Dr.ElginIL60123 847-634-1900S136*0.9
Minster Machine Co.PO Box 120MinsterOH45865John Winch419-628-2331R91*0.6
Astro Air Inc.1653 N Bolton St.JacksonvilleTX75766Rex Dacus903-586-3691R59*0.3
Angelus Sanitary Can Machine4900 Pacific Blvd.Los AngelesCA90058Maury Koeberle323-583-2171R56*0.5
Mate Precision Tooling Inc.1295 Lund Blvd.AnokaMN55303Jack Schneider763-421-0230R56*0.3
Magnetic Metals Corp.1900 Hayes Ave.CamdenNJ08105Frank Raneiro856-964-7842R50*0.4
Elizabeth Carbide Die CompanyPO Box 95McKeesportPA15135D Keefer412-751-3000R50*0.1
Sterling Inc.2900 S 160th St.New BerlinWI53151Tom Breslin414-354-0970R45*0.1
Murata Machinery USA Inc.PO Box 667609CharlotteNC28266Masahiko Hattori704-394-8331R43*0.1
National Machinery L.L.C.PO Box 747TiffinOH44883 419-447-5211R43*0.3
General Electro-Mechanical100 Gemcor Dr.West SenecaNY14224Thomas H. Speller Jr.716-674-9300R41*<0.1
Ntm Inc.PO Box 1247MauldinSC29662Curtis Harper864-675-9376R41*<0.1
Chicago Rivet and Machine Co.PO Box 3061NapervilleIL60566Michael J. Bourg630-357-8500P400.3
Pines Manufacturing Inc.30505 Clemens Rd.WestlakeOH44145Donald Rebar440-835-5553R39*<0.1
Lummus Corp.PO Box 4259SavannahGA31407Dikran Izmirlian912-447-9000R37*0.2
Composidie Inc.1295 State Rte. 380ApolloPA15613Ted Wohlin724-727-3466R35*0.2
W.A. Whitney Co.PO Box 1206RockfordIL61105Gary Geller815-964-6771S33*0.2
Sun Microstamping Technologies14055 US Hwy 19ClearwaterFL33764Bryan Clark727-536-8822R32*0.3
MC Machinery Systems Inc.1500 Michael Dr.Wood DaleIL60191Tetsuji Koike630-860-4210R32*0.2
American GFM Corp.1200 Cavalier Blvd.ChesapeakeVA23323Robert Kralowetz757-487-2442R32*0.2
Strippit Inc.12975 Clarence Ctr.AkronNY14001John Lesebbre716-542-4511R32*0.2
Charles E Jarrell Contracting4208 Rider Trl. NEarth CityMO63045Michael Jarrell314-291-0100R32*0.3
Martin Rea Industries Inc.603 E Church Ave.Reed CityMI49677 231-832-5504R30*0.1
Taylor's Industrial Services820 W Marion Rd.Mount GileadOH43338 419-946-0222R29*0.2
Deringer-Ney Inc.616 Atrium Dr., 100Vernon HillsIL60061 847-932-6800R28*0.2
Buhler Inc.PO Box 9497MinneapolisMN55440 763-847-9900R27*0.2
Schmiede Corp.PO Box 1630TullahomaTN37388Bozena Schmiede931-455-4801R27*0.1
Anderson Cook Inc.17650 15 Mile Rd.FraserMI48026Kim Anderson586-293-0800R26*<0.1
Mechanical Tool & EngineeringPO Box 5906RockfordIL61125Richard Nordlof815-397-4701R26*0.2
Centricut L.L.C.2 Technology Dr.West LebanonNH03784 603-298-7849S22*0.1
Gasbarre Products Inc.PO Box 1011Du BoisPA15801Thomas Gasbarre814-371-3015R21*0.1
ASC Machine Tools Inc.PO Box 11619SpokaneWA99211Ray Griff509-534-6600R21*0.2
Williams White and Co.600 River Dr.MolineIL61265Sunder Subbaroyan309-797-7650R21*0.1
Fabco-Air Inc.PO Box 5159GainesvilleFL32627William Schmidt352-373-3578R20*0.1
Jesse Engineering Co.5225 7th St. ETacomaWA98424Jeff Gellert253-922-7433R18*<0.1
Iverson Industries Inc.580 Hillsdale St.WyandotteMI48192Thomas Iverson734-284-5301R18*<0.1
Twist Inc.PO Box 177JamestownOH45335Joe Wright937-675-9581R18*0.1
Custom Engineering Co.PO Box 10008EriePA16514Thomas Hagen814-898-2800R18*0.2
MTD Technologies Inc.5201 102nd Ave.Pinellas ParkFL33782Dennis Ruppel727-546-2446R17*0.1
Advance Manufacturing Co. Inc.PO Box 726WestfieldMA01086Anthony Amanti413-568-2411R17*0.2
Amada Manufacturing America14646 Northam St.La MiradaCA90638Sadashi Kiyooka714-690-5600R17*0.1
Roper Whitney of Rockford Inc.2833 Huffman Blvd.RockfordIL61103David Casazza815-962-3011R17*0.1
Erie Press Systems Inc.PO Box 4061EriePA16512Gary Lunger814-455-3941R17*<0.1
Clark Granco Inc.7298 Storey Rd.BeldingMI48809Lawrence Difatta616-794-2600R16*0.1
DADCO Inc.43850 Plym OaksPlymouthMI48170Michael Diebolt734-207-1100R16*0.1
Press Repair Engineering SalesPO Box 1381MorristownTN37816Dennis Christian423-586-2406R15*<0.1
Qualex Manufacturing L.L.C.PO Box 807GeorgetownKY40324 502-863-6348R15*0.1
Baldauf Enterprises1321 S Vly Ctr Dr.Bay CityMI48706Harold Baldauf989-686-0399R14*<0.1
Wabash Metal Products Inc.PO Box 298WabashIN46992Bruce Freeman260-563-1184S14*<0.1
Rocky Mtn Welding & Fabric.PO Box 397Pleasant GroveUT84062Marcel Roest801-785-5990R13*0.1
Jorban-Riscoe Associates Inc.9808 Alden St.LenexaKS66215Mark Riscoe913-438-1244R13*<0.1
HMS Products Co.1200 E Big BeaverTroyMI48083Dave Sofy248-689-8120R13*<0.1
Baltec Corp.130 Technology Dr.CanonsburgPA15317Fritz Boesch724-873-5757R13*<0.1
Pannier Corp.207 Sandusky St.PittsburghPA15212Scott Heddaeus412-323-4900R13*<0.1
Kobelco Stewart Bolling Inc.1600 Terex RoadHudsonOH44236Toshio Yanagihara330-655-3111R13*<0.1
Daugherty Tool and Die Inc.325 Industry Rd.Buena VistaPA15018Timothy Beringer412-754-0200R12*<0.1
Galland Henning Nopak Inc.1025 S 40th St.MilwaukeeWI53215H Nunnemacher414-645-6000R12*<0.1
Rogers Industrial Products532 S Main StreetAkronOH44311John Cole330-535-3331R12*<0.1
Hi-Tech Tool Industries Inc.6701 Ctr. Dr.Sterling HgtsMI48312Arno Rabin586-826-8346R12*<0.1
Prim Hall Enterprises Inc.11 Spellman Rd.PlattsburghNY12901John Prim518-561-7408R12*<0.1
Technical Machine Products5500 Walworth Ave.ClevelandOH44102Ted Soberay216-281-9500R11*<0.1
Taber Industries455 Bryant StreetN TonawandaNY14120Dan Slawson716-694-4000R11*<0.1
Arnold's Welding Service1405 Waterless St.FayettevilleNC28306Bill Arnold910-485-6618R11*<0.1
Winfield Taylor Corp.PO Box 500BrookfieldOH44403John Anderson330-448-4464R11*<0.1
Miller Tool and Die Co.829 Belden Rd.JacksonMI49203Emmanuel Miller517-782-0347R10*<0.1
TENNSMITH Inc.6926 SmithvilleMc MinnvilleTN37110Douglas Smith931-934-2211R10*<0.1
Moore's Machine Company13120 Nc Hwy. 902Bear CreekNC27207Eugene Moore919-837-5354R10*0.1
Edmunds Manufacturing Co.PO Box 385FarmingtonCT06034R.F. Edmunds Jr.860-677-2813R10*0.1
Egenolf Machine Inc.2916 Bluff Rd.IndianapolisIN46225James Egenolf317-787-5301R10*<0.1
MATERIALS CONSUMED
MaterialQuantityDelivered Cost ($ million)
Source: 2002 Economic Census. Explanation of symbols used: (D): Withheld to avoid disclosure of competitive data; na: Not available; (S): Withheld because statistical norms were not met; (X): Not applicable; (Z): Less than half the unit shown; nec: Not elsewhere classified; nsk: Not specified by kind; - : zero; p : 10-19 percent estimated; q : 20-29 percent estimated.
Fluid power pumps, motors, and hydrostatic transmissions(X)8.0
Fluid power cylinders and rotary actuators (hydraulic and pneumatic)(X)2.5
Fluid power filters (hydraulic and pneumatic)(X)0.4
Fluid power hose, tube fittings, and assemblies (hydraulic and pneumatic)(X)3.0
Fluid power valves (hydraulic and pneumatic)(X)3.0
Metal bolts, nuts, screws, and other screw machine products(X)2.9
Other fabricated metal products (exc. fluid power products and forgings)(X)16.6
Forgings(X)1.8
Iron and steel castings (rough and semifinished)(X)10.7
Nonferrous (aluminum, copper, etc.) castings (rough and semifinished)(X)0.3
Steel bars, bar shapes, and plates (exc. castings, forgings, fabr. metal products)(X)14.4
Steel sheet and strip (including tinplate)(X)1.4
Steel structural shapes (exc. castings, forgings, fabr. metal products)(X)2.9
All other steel shapes and forms (exc. castings, forgings, fabr. metal products)(X)3.7
Nonferrous shapes and forms(X)2.9
Fractional horsepower electric timing motors (less than 1 hp)(X)2.0
Other fractional horsepower electric motors (less than 1 hp)(X)0.2
Integral horsepower electric motors and generators (1 hp or more)(X)2.7
Electrical transmission, distribution, and control equipment(X)4.5
Electrical industrial capacitors, resistors, rheostats, and coil windings(X)0.9
Numerical controls, metalworking machinery (exc. programmable)(X)2.0
Programmable controllers for metalworking machinery(X)6.2
Printed circuit assemblies, loaded boards, and modules(X)1.0
Printed circuit boards (without inserted components) for electronic circuitry(X)0.3
Semiconductors (incl. transistors, diodes, rectifiers, and integrated circuits), for electronic circuitry(X)0.6
All other miscellaneous components and accessories for electronic circuitry (exc. tubes)(X)5.1
Electrical instrument mechanisms and meter movements(X)1.5
Electronic communication equipment(X)0.1
Optical instruments and lenses (exc. sighting, tracking, and fire control)(X)0.9
Ball bearings (mounted or unmounted)(X)2.3
Roller bearings (mounted or unmounted)(X)2.5
Mechanical speed changers, gears, and industrial high-speed drives(X)1.8
Wood boxes, pallets, skids, and containers(X)1.5
Cutting tools for machine tools(X)2.8
Fabricated plastics products (exc. gaskets, hoses, and belting)(X)0.2
Paper and paperboard containers (incl. shipping sacks and other paper packaging supplies)(X)0.7
All other materials, components, parts, containers, and supplies(X)102.8
Materials, ingredients, containers, and supplies, nsk(X)181.7
PRODUCT SHARE DETAILS
Product or Product Class ShipmentsMil. $Product or Product Class ShipmentsMil. $
Source: 2002 Economic Census. The values are product shipments in millions of dollars for 2002. Total product shipments may be lower or higher than industry shipments. See Introduction for a full discussion. Values of indented subcategories are summed in the main heading(s). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. The abbreviation nsk stands for ‘not specified by kind’ and nec for ‘not elsewhere classified’. A dash (-) means zero.
MACHINE TOOLS, METAL FORMING TYPES1,146.7      Other parts for metal forming machine tools182.7
  Metal punching and shearing machines (including power and manual) and bending and forming machines (power only)351.5      Rebuilt metal forming machine tools (including machines returned to same configuration they were in when new from factory)9.8
  Metalworking presses (except forging and die-stamping presses)204.7      Remanufactured metal forming machine tools (including machines in which the basic carcass is reused and all possible modern improvements have been incorporated)14.9
  Other metal forming machine tools, including forging and die-stamping machines (except metalworking presses)228.4    Parts for metal forming machine tools (sold separately) and rebuilt and remanufactured metal forming machine tools, nsk7.9
  Parts for metal forming machine tools (sold separately) and rebuilt and remanufactured metal forming machine tools242.3  Machine tools, metal forming types, nsk, total119.8
    Parts for metal forming machine tools (sold separately), rebuilt and remanufactured metal forming machine tools, and die-casting machines234.4  
      Parts for die-casting machines27.0  
INPUTS AND OUTPUTS FOR METAL CUTTING AND FORMING MACHINE TOOL MANUFACTURING
Economic Sector or Industry Providing Inputs%SectorEconomic Sector or Industry Buying Outputs%Sector
Compensation of employees38.8 Private fixed investment50.8 
Management of companies & enterprises7.2ServicesExports of goods & services27.5Cap Inv
Wholesale trade4.7TradeS/L govt. invest., other4.7S/L Govt
Iron & steel mills & ferroalloys4.5Manufg.Plate work & fabricated structural products3.2Manufg.
Relay & industrial controls2.7Manufg.Nonferrous metal foundries1.7Manufg.
Ferrous metal foundries2.3Manufg.General purpose machinery, nec1.4Manufg.
Metal cutting & forming machine tools2.3Manufg.Metal cutting & forming machine tools1.3Manufg.
INPUTS AND OUTPUTS FOR METAL CUTTING AND FORMING MACHINE TOOL MANUFACTURING -Continued
Economic Sector or Industry Providing Inputs%SectorEconomic Sector or Industry Buying Outputs%Sector
Source: Benchmark Input-Output Accounts for the U.S. Economy, 2002, U.S. Department of Commerce, Washington D.C., January 2008. User should note that this Input-Output table is not for this particular narrowly defined industry but for a larger aggregate. Input and Output data for Metal Cutting and Forming Machine Tool Manufacturing include Input and Output data for the Annual Survey of Manufactures’ NAICS industries 333512 and 333513. The abbreviation nec stands for ‘not elsewhere classified’.
Machine shops1.9Manufg.S/L govt. invest., education1.3S/L Govt
Paints & coatings1.9Manufg.Rolling mill & other metalworking machinery1.3Manufg.
Ball & roller bearings1.3Manufg.Motor vehicle parts1.2Manufg.
Securities, commodity contracts, investments1.3Fin/R.E.Sporting & athletic goods1.2Manufg.
Advertising & related services1.2ServicesEducational services, nec0.8Services
Motors & generators1.1Manufg.Federal government, investment, national defense0.7Fed Govt
Fluid power process machinery1.0Manufg.Machine shops0.6Manufg.
Real estate1.0Fin/R.E.Personal consumption expenditures0.6 
Valve & fittings other than plumbing1.0Manufg.Fabricated metals, nec0.5Manufg.
Speed changers, industrial high-speed drives, & gears1.0Manufg.General S/L govt. services0.5S/L Govt
Turned products & screws, nuts, & bolts1.0Manufg.Farm machinery & equipment0.2Manufg.
Abrasive products1.0Manufg.Warehousing & storage0.2Util.
Custom computer programming services0.9Services   
Cutting tools & machine tool accessories0.8Manufg.   
Power generation & supply0.8Util.   
Printed circuit assemblies (electronic assembiles)0.8Manufg.   
Truck transportation0.7Util.   
Lessors of nonfinancial assets0.7Fin/R.E.   
Coating, engraving, heat treating & allied activities0.6Manufg.   
Noncomparable imports0.6Foreign   
Taxes on production & imports, less subsidies0.6    
Monetary authorities/depository credit intermediation0.5Fin/R.E.   
Electronic components, nec0.5Manufg.   
Telecommunications0.5Services   
Legal services0.5Services   
Data processing, hosting, & related services0.5Services   
Food services & drinking places0.5Services   
Professional, scientific, technical services, nec0.5Services   
Postal service0.5Util.   
Scientific research & development services0.4Services   
Custom roll forming0.4Manufg.   
Accounting, tax preparation, bookkeeping, & payroll0.4Services   
Warehousing & storage0.4Util.   
Automotive equipment rental & leasing0.4Fin/R.E.   
Electricity & signal testing instruments0.3Manufg.   
Wood containers & pallets0.3Manufg.   
Fabricated metals, nec0.3Manufg.   
Gold, silver, & other metal ore0.3Mining   
Hotels & motels, including casino hotels0.2Services   
Metal cans, boxes, & other containers (light gauge)0.2Manufg.   
Forging, stamping, & sintering, nec0.2Manufg.   
Rubber products, nec0.2Manufg.   
Services to buildings & dwellings0.2Services   
Plastics products, nec0.2Manufg.   
Maintenance/repair of nonresidential structures0.2Construct.   
Commercial & industrial machinery rental & leasing0.2Fin/R.E.   
Management, scientific, & technical consulting0.2Services   
Nonmetallic minerals, nec0.2Mining   
Air transportation0.2Util.   
Natural gas distribution0.2Util.   
Crowns & closures & metal stamping0.2Manufg.   
Other computer related services, including facilities0.2Services   
Architectural, engineering, & related services0.2Services   
Plastics packaging materials, film & sheet0.2Manufg.   
General purpose machinery, nec0.2Manufg.   
Rail transportation0.2Util.   
Business support services0.2Services   
Plate work & fabricated structural products0.1Manufg.   
Chemical products & preparations, nec0.1Manufg.   
Handtools0.1Manufg.   
Nonferrous metal foundries0.1Manufg.   
Nondepository credit intermediation activities0.1Fin/R.E.   
Employment services0.1Services   
Motor vehicle parts0.1Manufg.   
Paperboard mills0.1Manufg.   
Automotive repair & maintenance, ex. car washes0.1Services   
Specialized design services0.1Services   
Bare printed circuit boards0.1Manufg.   
Electronic capacitors, resistors, coils, transformers0.1Manufg.   
Paperboard containers0.1Manufg.   
Commercial & industrial equipment repair/maintenance0.1Services   
OCCUPATIONS EMPLOYED BY METALWORKING MACHINERY MANUFACTURING
Occupation% of Total 2006Change to 2016Occupation% of Total 2006Change to 2016
Source: Industry-Occupation Matrix, Bureau of Labor Statistics, December 4, 2007. These data are reported based on 4-digit NAICS categories but have been matched to corresponding 6-digit NAICS industry codes. The change reported for each occupation to the year 2016 is a percent of growth or decline as estimated by the Bureau of Labor Statistics. The abbreviation nec stands for ‘not elsewhere classified’.
Machinists12.8-14.0Office clerks, general1.7-19.3
Tool & die makers11.0-14.0Shipping, receiving, & traffic clerks1.6-21.2
Computer-controlled machine tool operators5.4-9.9Welders, cutters, solderers, & brazers1.6-12.9
First-line supervisors/managers of production workers4.6-18.1Bookkeeping, accounting, & auditing clerks1.5-18.1
Grinding, lapping, polishing machine tool operators3.3-20.6Helpers--Production workers1.4-18.1
Cutting, punching, & press machine operators3.2-26.3Sales reps, wholesale & manufacturing, exc tech1.4-18.1
Team assemblers2.9-18.1Tool grinders, filers, & sharpeners1.4-26.3
Molding, coremaking, & casting machine operators2.8-26.3Numerical tool & process control programmers1.3-15.6
Mechanical engineers2.2-18.1Milling & planing machine operators & tenders1.3-26.3
General & operations managers2.0-26.3Maintenance & repair workers, general1.3-18.1
Inspectors, testers, sorters, samplers, & weighers2.0-22.8Industrial production managers1.1-18.1
Mechanical drafters1.8-17.2Janitors & cleaners, exc maids & housekeeping cleaners1.1-16.3
Lathe & turning machine tool operators & tenders1.8-26.3Multiple machine tool operators & tenders1.0-9.9
INDUSTRY DATA BY STATE
StateEstablishmentsShipmentsEmploymentCost as % of ShipmentsInvestment per Employee ($)
Total ($ mil)% of U.S.Per Establ.Total Number% of U.S.Per Establ.Wages ($/hour)
Source: 2002 Economic Census. The states are in descending order of shipments or establishments (if shipment data are missing for the majority). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. States marked with (D) are sorted by number of establishments. A dash (-) indicates that the data element cannot be calculated. Data may not show all states active in the NAICS category. All data available at the time of publication are shown.
Ohio20248.822.312,438.21,68423.28425.9243.21,977
Michigan26179.116.06,889.91,17316.24521.6839.95,530
Illinois14100.19.07,153.45848.04220.9244.58,284
New York1063.15.66,306.64015.54018.0344.74,554
Pennsylvania1262.65.65,216.14736.53918.6039.510,070
California1453.74.83,832.73605.02618.4744.72,572
Massachusetts838.53.44,810.32633.63320.0738.65,038
Indiana920.01.82,220.61492.11717.9332.22,201
Missouri618.81.73,135.01532.12520.6837.51,072

More From encyclopedia.com

About this article

NAICS 333513 - Machine Tool (Metal Forming Types) Manufacturing

Updated About encyclopedia.com content Print Article

You Might Also Like

    NEARBY TERMS

    NAICS 333513 - Machine Tool (Metal Forming Types) Manufacturing