NAICS 333516 - Rolling Mill Machinery and Equipment Manufacturing

views updated

NAICS 333516 - Rolling Mill Machinery and Equipment Manufacturing

GENERAL STATISTICS
YearCompaniesEstablishmentsEmploymentCompensationProduction ($ million)
Totalwith 20 or more employeesTotal (000)ProductionPayroll ($ mil)Wages ($/hr)Cost of MaterialsValue Added by ManufactureValue of ShipmentsCapital Invest.
Workers (000)Hours (Mil)
Sources: 1992, 1997, 2002 Economic Census; other years, up to 2006, are from the Annual Survey of Manufactures. Establishment counts for non-Census years are from County Business Patterns; 1997 and 2002 values are from the 1997 and 2002 censuses respectively, reported in the Federal Government's NAICS format. Other years were originally reported in equivalent SIC format. ‘P's show projections by the editors.
1991 87363.92.34.9138.113.35228.5260.6486.811.5
19928789405.43.06.3186.813.52288.6313.2602.813.7
1993 92364.22.44.9154.914.88262.1284.2545.37.2
1994 88363.82.14.4139.314.59241.9282.4521.39.9
1995 87344.22.34.8156.115.56324.2340.8658.213.0
1996 98344.52.45.1166.714.80385.1355.3722.321.1
199798100404.12.24.7167.315.93323.5363.6700.117.3
1998 100364.32.34.7179.117.94310.2342.2661.713.8
1999 95333.11.63.4127.416.17201.1218.1429.721.5
2000 81293.11.83.9158.019.68259.1323.0579.221.3
2001 88303.01.83.6146.219.30249.9242.7494.014.6
20027379332.71.63.5138.418.71238.0245.1493.717.8
2003 72302.51.43.0123.620.10232.9270.1510.711.5
2004 78322.41.53.2127.620.40209.9278.1479.114.8
2005 80322.61.63.6150.021.48342.2349.0672.415.2
2006 79P30P2.81.73.9163.021.93405.0348.8738.915.2
2007 78P29P2.2P1.3P3.0P140.8P22.35P325.1P280.0P593.2P17.4P
2008 77P29P2.0P1.3P2.8P139.5P22.94P325.9P280.7P594.6P17.7P
2009 76P28P1.9P1.2P2.7P138.2P23.52P326.7P281.4P596.1P18.0P
2010 75P28P1.7P1.1P2.5P137.0P24.10P327.5P282.1P597.5P18.2P
INDICES OF CHANGE
YearCompaniesEstablishmentsEmploymentCompensationProduction ($ million)
Totalwith 20 or more employeesTotal (000)ProductionPayroll ($ mil)Wages ($/hr)Cost of MaterialsValue Added by ManufactureValue of ShipmentsCapital Invest.
Workers (000)Hours (Mil)
Sources: Same as General Statistics. Values reflect change from the base year, 2002. Values above 100 mean greater than 2002, values below 100 mean less than 2002, and the values of 100 in other years means the same as 2002. ‘P's show projections by the editors.
19921191131212001881801357212112812277
19971341271211521381341218513614814297
2001 111911111131031061031059910082
2002100100100100100100100100100100100100
2003 9191938786891079811010365
2004 999789949192109881139783
2005 101979610010310811514414213685
2006 101P91P10410611111811717014215085
2007 99P89P81P81P86P102P119P137P114P120P98P
2008 98P87P74P81P80P101P123P137P115P120P99P
2009 97P86P70P75P77P100P126P137P115P121P101P
2010 95P84P63P69P71P99P129P138P115P121P102P
SELECTED RATIOS
For 2002Avg. of All Manufact.Analyzed IndustryIndexFor 2002Avg. of All Manufact.Analyzed IndustryIndex
Sources: Same as General Statistics. The ‘Average of All Manufacturing’ column represents the average of all manufacturing industries reported for the most recent complete year available. The Index shows the relationship between the Average and the Analyzed Industry. For example, 100 means that they are equal; 500 that the Analyzed Industry is five times the average; 50 means that the Analyzed Industry is half the national average. The abbreviation ‘na’ is used to show that data are ‘not available’. Ratios shown for 2002, the last complete census year.
Employees per Establishment423481Value Added per Production Worker182,367153,18884
Payroll per Establishment1,639,1841,751,899107Cost per Establishment5,769,0153,012,65852
Payroll per Employee39,05351,259131Cost per Employee137,44688,14864
Production Workers per Establishment302069Cost per Production Worker195,506148,75076
Wages per Establishment694,845828,924119Shipments per Establishment11,158,3486,249,36756
Wages per Production Worker23,54840,928174Shipments per Employee265,847182,85269
Hours per Production Worker1,9802,188110Shipments per Production Worker378,144308,56382
Wages per Hour11.8918.71157Investment per Establishment361,338225,31662
Value Added per Establishment5,381,3253,102,53258Investment per Employee8,6096,59377
Value Added per Employee128,21090,77871Investment per Production Worker12,24511,12591
LEADING COMPANIES Number shown: 74 Total sales ($ mil): 8,990 Total employment (000): 5.3
Company NameAddress   CEO NamePhoneCo. TypeSales ($ mil)Empl. (000)
Source: Ward's Business Directory of U.S. Private and Public Companies, Volumes 1 and 2, 2008. The company type code used is as follows: P - Public, R - Private, S - Subsidiary, D - Division, J - Joint Venture, A - Affiliate, G - Group. Sales are in millions of dollars, employees are in thousands. An asterisk (*) indicates an estimated sales volume. The symbol < stands for ‘less than’. Company names and addresses are truncated, in some cases, to fit into the available space.
RB and W Manufacturing L.L.C.800 Mogadore Rd.KentOH44240 330-673-3446S6,375*<0.1
Foseco Inc.PO Box 81227ClevelandOH44181Lee Plutshack440-826-4548R772*<0.1
Cleveland Formtek Inc.4899 CommerceClevelandOH44128Joe Mayer216-292-6300R372*<0.1
Danieli Corp.800 Cranberry WdsCranberry TwpPA16066Mark Brandon724-778-5400R306*<0.1
Welded Tube of Canada Inc.6401 Rogers Rd. ADeltaOH43515Barry Sonshine419-822-3333R96*0.3
JK Manufacturing Co.7301 W 66th St.Bedford ParkIL60638Jozef Koniecko708-563-2500R95*<0.1
Bradbury Company Inc.PO Box 667MoundridgeKS67107David Bradbury620-345-6394R90*0.3
Arkansas Steel Associates2803 Van Dyke Rd.NewportAR72112Toshinori Nakanishi870-523-3693R89*0.2
Vulcan Engineering Co.PO Box 307HelenaAL35080 205-663-0732R62*0.2
Dantherm Filtration Inc.PO Box 429ThomasvilleNC27361Niels Petersen336-889-5599R59*0.1
Morgan Construction Company15 Belmont St., 1WorcesterMA01605Philip Morgan508-755-6111R41*0.4
Pines Manufacturing Inc.30505 Clemens Rd.WestlakeOH44145Donald Rebar440-835-5553R39*<0.1
IMPCO Machine ToolsPO Box 10156LansingMI48901Dave Houghton517-484-9411R38*0.2
CRC-Evans Pipeline Int’lPO Box 50368TulsaOK74150 918-438-2100R35*0.1
Xtek Inc.11451 Reading Rd.CincinnatiOH45241Kyle Seymour513-733-7800R34*0.2
Yoder Manufacturing Co.26800 RichmondClevelandOH44146Roger Steel216-591-2180S31*0.2
Intergrated Industrial Systems475 Main St.YalesvilleCT06492John Herbst203-265-5684R30*0.2
United Foundries Inc.1400 Grace Ave. NECantonOH44705Ronald Martin330-456-2761R24*0.2
Roto-Finish Company Inc.1600 Douglas Ave.KalamazooMI49007Robert E. Hammond269-345-7151S24*<0.1
New Tech Machinery Corp.1300 40th St.DenverCO80205Larry Coben303-294-0538R22*<0.1
J and J ManufacturingPO Box 6295BeaumontTX77725James Hayes409-833-8951R22*<0.1
Bud Red Industries Inc.200 B & E Ind. Dr.Red BudIL62278Kalin Liefer618-282-3801R21*0.1
Bardons and Oliver Inc.5800 Harper Rd.ClevelandOH44139Heath Oliver440-498-5800R19*0.1
Cannon Equipment SoutheastPO Box 1446ChattanoogaTN37401Wayne Whitney423-752-1000R19*0.2
DP Manufacturing Inc.PO Box 471710TulsaOK74147Steve Oden918-250-2450R19*0.2
Mark One Corp.517 Alpine Rd.GaylordMI49735Francis Kestler989-731-3800R18*0.1
T and H Lemont5118 Dansher Rd.CountrysideIL60525John Hillis708-482-1800S14*<0.1
Amerifab Inc.2075 S BelmontIndianapolisIN46221Gabe Carinci317-231-0100R12*<0.1
Mc Ginnis Brothers Inc.PO Box 2047HuntingtonWV25720Dave Ferguson304-523-6428R12*<0.1
Addison Machine Engineering1301 Industrial St.ReedsburgWI53959Gerald Brunken608-524-6454R11*<0.1
Pandjiris Inc.PO Box 790100Saint LouisMO63179Robert Mann314-776-6893R10*<0.1
Steward Machine Company Inc.PO Box 11008BirminghamAL35202W Debardeleben205-841-6461R9*0.1
Capco Machinery Systems Inc.PO Box 11945RoanokeVA24022Edward West540-977-0404R8*<0.1
Dalton Industries L.L.C.PO Box 300888Drayton PlainsMI48330 248-673-0755R8*<0.1
Perfecto Industries Inc.1567 Calkins Dr.GaylordMI49735Kevin Roberts989-732-2941R8*<0.1
Industrial Plastic SystemsPO Box 6280LakelandFL33807Barron Burhans863-646-8551R7*<0.1
Wauseon Machine and Mfg.995 Enterprise Ave.WauseonOH43567Russell Dominique419-337-0940R7*<0.1
Bonell Manufacturing Co.13521 S Halsted St.RiverdaleIL60827Thomas Okleshen708-849-1770R7*<0.1
Future-All Inc.PO Box 528CarnegiePA15106Charles King412-279-2670R7*<0.1
Medart Inc.199 Clyde St.Ellwood CityPA16117David Pierce724-752-2900R6*<0.1
Union Tool Corp.PO Box 935WarsawIN46581 574-267-3211R6*<0.1
Konrad Marine Inc.1421 Hanley Rd.HudsonWI54016Ken Konrad715-386-4203R6*<0.1
UFF Machine Co.PO Box 1081BrookhavenPA19015Richard Clure610-876-7157R6*<0.1
Finzer Roller of Illinois Inc.9003 Yellow BrickBaltimoreMD21237 410-687-7188S5*<0.1
J Horst Manufacturing Co.PO Box 507DaltonOH44618James Horst330-828-2216R5*<0.1
Rafter Equipment Corp.12430 Alameda Dr.StrongsvilleOH44149Walter Krenz440-572-3700R5*<0.1
Michigan Roll Form Inc.33946 Doreka Dr.FraserMI48026Cornelis Arens586-294-7600R5*<0.1
Feed-Lease Corp.2600 Crooks Rd.Rochester HillsMI48309John Stretten248-852-6660R5*<0.1
Testa Machine Company Inc.PO Box 416SlovanPA15078Richard Lounder724-947-9397R4*<0.1
Owens Research Inc.13541 Lk NewmanJacksonvilleFL32221Carl Owens904-448-1355R4*<0.1
George L Kovacs1810 W Business CtrOrangeCA92867George Kovacs714-538-8026R4*<0.1
Fab-Art Inc.PO Box 2270YoungstownOH44504Daniel Tufaro330-746-4628R4*<0.1
Gega Corp.4853 Campbells RunPittsburghPA15205Horst Lotz412-787-2832R4*<0.1
Laneko Roll Form Inc.3003 Unionville PkeHatfieldPA19440Ernest Pfeiffer215-822-1930R4*<0.1
Dalhart R and R Machine WorksPO Box 1330DalhartTX79022Wesley Wood806-244-5686R4*<0.1
Grover Machine Co.207 Prospect Ave.Saint LouisMO63122Jean Micouleau314-965-6808R3*<0.1
Sticker Corp.37877 Elm StreetWilloughbyOH44094Douglas Reighart440-946-2100R3*<0.1
Leman Machine Co.PO Box 269PortagePA15946Stuart Leman814-736-9696R3*<0.1
George A Mitchell Co.PO Box 3727YoungstownOH44513George Mitchell330-758-5777R3*<0.1
Konrad Corp.1421 Hanley Rd.HudsonWI54016Ken Konrad715-386-4200R3*<0.1
Steel Plant Equipment Corp.3360 Ridge Pke.EaglevillePA19403Gerard Marinari610-539-0980R3*<0.1
Mill Assist Services Inc.141 N Farmer St.OtsegoMI49078Denis Gloede269-692-3211R3*<0.1
Roller Equipment Manufacturing13903 Norby Rd.GrandviewMO64030Dean Armstrong816-966-8717R3*<0.1
Winchester Roll Products Inc.41 Hildreth St.WinchesterNH03470Barry Bordner603-239-6326R2*<0.1
Nor Service Inc.215 S State Ave.FreeportIL61032Neil Rouse815-232-8379R2*<0.1
Grinding Equipment and Machine15 S Worthington StYoungstownOH44502James Johnson330-747-2313R2*<0.1
S2F Engineering Inc.324 Sherman St.BlissfieldMI49228Steve Dobson517-486-5737R2*<0.1
Bendco Machine and Tool Co.PO Box 6MinsterOH45865Kenneth Wolaver419-628-3802R2*<0.1
Tube Forming and Machin Inc.4614 Industrial RowOscodaMI48750Jerome Orefice989-739-3323R2*<0.1
Western Technologies Inc.4404 S MaybelleTulsaOK74107Russell Patterson918-712-2406R2*<0.1
Indemax Inc.PO Box 544SpartaNJ07871Alphonse Infurna973-209-2424R2*<0.1
Pacific Roller Die Company1321 W WintonHaywardCA94545 510-782-7242R1*<0.1
Fontijne Grotnes Inc.1025 W ThrndaleItascaIL60143Andrew Fontijne630-875-1111R1*<0.1
Criterion Machinery Inc.7655 Hub 201ClevelandOH44125Rose Prescott216-573-0311R1*<0.1
MATERIALS CONSUMED
MaterialQuantityDelivered Cost ($ million)
Source: 2002 Economic Census. Explanation of symbols used: (D): Withheld to avoid disclosure of competitive data; na: Not available; (S): Withheld because statistical norms were not met; (X): Not applicable; (Z): Less than half the unit shown; nec: Not elsewhere classified; nsk: Not specified by kind; - : zero; p : 10-19 percent estimated; q : 20-29 percent estimated.
Fluid power pumps, motors, and hydrostatic transmissions(X)4.3
Fluid power cylinders and rotary actuators (hydraulic and pneumatic)(X)(D)
Fluid power filters (hydraulic and pneumatic)(X)0.7
Fluid power hose, tube fittings, and assemblies (hydraulic and pneumatic)(X)2.1
Fluid power valves (hydraulic and pneumatic)(X)2.4
Metal bolts, nuts, screws, and other screw machine products(X)0.4
Other fabricated metal products (exc. fluid power products and forgings)(X)18.0
Forgings(X)(D)
Iron and steel castings (rough and semifinished)(X)11.7
Nonferrous (aluminum, copper, etc.) castings (rough and semifinished)(X)(D)
Steel bars, bar shapes, and plates (exc. castings, forgings, fabr. metal products)(X)15.3
Steel sheet and strip (including tinplate)(X)1.3
Steel structural shapes (exc. castings, forgings, fabr. metal products)(X)2.1
All other steel shapes and forms (exc. castings, forgings, fabr. metal products)(X)1.8
Nonferrous shapes and forms(X)<0.1
Fractional horsepower electric timing motors (less than 1 hp)(X)0.1
Other fractional horsepower electric motors (less than 1 hp)(X)(D)
Integral horsepower electric motors and generators (1 hp or more)(X)(D)
Electrical transmission, distribution, and control equipment(X)(D)
Electrical industrial capacitors, resistors, rheostats, and coil windings(X)<0.1
Electrical instrument mechanisms and meter movements(X)<0.1
Numerical controls, metalworking machinery (exc. programmable)(X)<0.1
Programmable controllers for metalworking machinery(X)3.3
Ball bearings (mounted or unmounted)(X)(D)
Roller bearings (mounted or unmounted)(X)(D)
Mechanical speed changers, gears, and industrial high-speed drives(X)12.0
Wood boxes, pallets, skids, and containers(X)0.8
Cutting tools for machine tools(X)2.1
Printed circuit assemblies, loaded boards, and modules(X)(D)
Semiconductors (incl. transistors, diodes, rectifiers, and integrated circuits), for electronic circuitry(X)(D)
All other miscellaneous components and accessories for electronic circuitry (exc. tubes)(X)(D)
Paper and paperboard containers (incl. shipping sacks and other paper packaging supplies)(X)0.1
Fabricated plastics products (exc. gaskets, hoses, and belting)(X)(D)
Electronic communication equipment(X)(D)
All other materials, components, parts, containers, and supplies(X)54.4
Materials, ingredients, containers, and supplies, nsk(X)14.6
PRODUCT SHARE DETAILS
Product or Product Class ShipmentsMil. $Product or Product Class ShipmentsMil. $
Source: 2002 Economic Census. The values are product shipments in millions of dollars for 2002. Total product shipments may be lower or higher than industry shipments. See Introduction for a full discussion. Values of indented subcategories are summed in the main heading(s). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. The abbreviation nsk stands for ‘not specified by kind’ and nec for ‘not elsewhere classified’. A dash (-) means zero.
ROLLING MILL MACHINERY489.3      Processing lines (including pickling and cleaning, tinning, galvanizing, etc.), scarfing units, and press feed lines31.1
  Hot rolling mill machinery (including combination hot and cold) (except tube rolling)133.3      Other rolling mill machinery and equipment, except parts12.6
  Cold rolling mill machinery71.7      Machined rolls for rolling mills98.2
      Tandem cold rolling mill machinery17.7      Parts, except rolls, for rolling mill machinery (sold separately)43.8
      Single stand cold rolling mill machinery36.9    Other rolling mill machinery (including tube mill machinery) and parts for all rolling mill machinery, nsk0.4
      Other cold rolling mill machinery and equipment17.1  Rolling mill machinery, nsk, total12.7
  Other rolling mill machinery (including tube mill machinery) and parts for all rolling mill machinery271.6  
    Other rolling mill machinery (including tube mill machinery) and parts for all rolling mill machinery271.2  
      Tube rolling mill machinery85.5  
INPUTS AND OUTPUTS FOR ROLLING MILL & OTHER METALWORKING MACHINERY
Economic Sector or Industry Providing Inputs%SectorEconomic Sector or Industry Buying Outputs%Sector
Compensation of employees36.0 Private fixed investment84.6 
Management of companies & enterprises7.0ServicesEducational services, nec4.4Services
Wholesale trade5.3TradeExports of goods & services3.2Cap Inv
Iron & steel mills & ferroalloys3.3Manufg.Special tools, dies, jigs, & fixtures3.1Manufg.
Relay & industrial controls3.0Manufg.Rolling mill & other metalworking machinery2.8Manufg.
Rolling mill & other metalworking machinery2.8Manufg.Plate work & fabricated structural products0.5Manufg.
Metal cutting & forming machine tools2.8Manufg.Metal tanks (heavy gauge)0.4Manufg.
Motors & generators2.3Manufg.Power boilers & heat exchangers0.4Manufg.
Ferrous metal foundries2.0Manufg.Manufacturing, nec0.3Manufg.
INPUTS AND OUTPUTS FOR ROLLING MILL & OTHER METALWORKING MACHINERY - Continued
Economic Sector or Industry Providing Inputs%SectorEconomic Sector or Industry Buying Outputs%Sector
Source: Benchmark Input-Output Accounts for the U.S. Economy, 2002, U.S. Department of Commerce, Washington D.C., January 2008. User should note that this Input-Output table is not for this particular narrowly defined industry but for a larger aggregate. Input and Output data for Rolling Mill & Other Metal Working Machinery include Input and Output data for the Annual Survey of Manufactures’ NAICS industries 333516 and 333518. The abbreviation nec stands for ‘not elsewhere classified’.
Speed changers, industrial high-speed drives, & gears1.7Manufg.   
Ball & roller bearings1.5Manufg.   
Fluid power process machinery1.4Manufg.   
Machine shops1.3Manufg.   
Real estate1.2Fin/R.E.   
Valve & fittings other than plumbing1.1Manufg.   
Securities, commodity contracts, investments1.0Fin/R.E.   
Turned products & screws, nuts, & bolts0.9Manufg.   
Printed circuit assemblies (electronic assembiles)0.8Manufg.   
Plastics products, nec0.8Manufg.   
Electronic components, nec0.7Manufg.   
Lessors of nonfinancial assets0.6Fin/R.E.   
Advertising & related services0.6Services   
Power generation & supply0.6Util.   
Abrasive products0.6Manufg.   
Custom computer programming services0.6Services   
Truck transportation0.5Util.   
Coating, engraving, heat treating & allied activities0.5Manufg.   
Monetary authorities/depository credit intermediation0.5Fin/R.E.   
Legal services0.5Services   
Architectural, engineering, & related services0.5Services   
Taxes on production & imports, less subsidies0.5    
Cutting tools & machine tool accessories0.5Manufg.   
Broadcast & wireless communications equipment0.5Manufg.   
Scientific research & development services0.4Services   
Professional, scientific, technical services, nec0.4Services   
Data processing, hosting, & related services0.4Services   
Electronic capacitors, resistors, coils, transformers0.4Manufg.   
Telecommunications0.4Services   
Accounting, tax preparation, bookkeeping, & payroll0.4Services   
Automotive equipment rental & leasing0.3Fin/R.E.   
Semiconductors & related devices0.3Manufg.   
Warehousing & storage0.3Util.   
Plastics packaging materials, film & sheet0.3Manufg.   
Chemical products & preparations, nec0.3Manufg.   
Food services & drinking places0.3Services   
Management, scientific, & technical consulting0.3Services   
Forging, stamping, & sintering, nec0.3Manufg.   
Motor vehicle parts0.2Manufg.   
Fabricated metals, nec0.2Manufg.   
Wood containers & pallets0.2Manufg.   
Custom roll forming0.2Manufg.   
Metal cans, boxes, & other containers (light gauge)0.2Manufg.   
Unlaminated plastics profile shapes0.2Manufg.   
Electricity & signal testing instruments0.2Manufg.   
Hotels & motels, including casino hotels0.2Services   
Nonferrous metal foundries0.2Manufg.   
Natural gas distribution0.2Util.   
Services to buildings & dwellings0.2Services   
Maintenance/repair of nonresidential structures0.2Construct.   
Rubber products, nec0.2Manufg.   
Commercial & industrial machinery rental & leasing0.2Fin/R.E.   
Postal service0.2Util.   
Other computer related services, including facilities0.2Services   
Business support services0.2Services   
Electrical equipment & components, nec0.1Manufg.   
Plate work & fabricated structural products0.1Manufg.   
Nondepository credit intermediation activities0.1Fin/R.E.   
Air transportation0.1Util.   
Crowns & closures & metal stamping0.1Manufg.   
Paperboard containers0.1Manufg.   
Employment services0.1Services   
Handtools0.1Manufg.   
Paperboard mills0.1Manufg.   
Specialized design services0.1Services   
Automotive repair & maintenance, ex. car washes0.1Services   
Bare printed circuit boards0.1Manufg.   
General purpose machinery, nec0.1Manufg.   
OCCUPATIONS EMPLOYED BY METALWORKING MACHINERY MANUFACTURING
Occupation% of Total 2006Change to 2016Occupation% of Total 2006Change to 2016
Source: Industry-Occupation Matrix, Bureau of Labor Statistics, December 4, 2007. These data are reported based on 4-digit NAICS categories but have been matched to corresponding 6-digit NAICS industry codes. The change reported for each occupation to the year 2016 is a percent of growth or decline as estimated by the Bureau of Labor Statistics. The abbreviation nec stands for ‘not elsewhere classified’.
Machinists12.8-14.0Office clerks, general1.7-19.3
Tool & die makers11.0-14.0Shipping, receiving, & traffic clerks1.6-21.2
Computer-controlled machine tool operators5.4-9.9Welders, cutters, solderers, & brazers1.6-12.9
First-line supervisors/managers of production workers4.6-18.1Bookkeeping, accounting, & auditing clerks1.5-18.1
Grinding, lapping, polishing machine tool operators3.3-20.6Helpers--Production workers1.4-18.1
Cutting, punching, & press machine operators3.2-26.3Sales reps, wholesale & manufacturing, exc tech1.4-18.1
Team assemblers2.9-18.1Tool grinders, filers, & sharpeners1.4-26.3
Molding, coremaking, & casting machine operators2.8-26.3Numerical tool & process control programmers1.3-15.6
Mechanical engineers2.2-18.1Milling & planing machine operators & tenders1.3-26.3
General & operations managers2.0-26.3Maintenance & repair workers, general1.3-18.1
Inspectors, testers, sorters, samplers, & weighers2.0-22.8Industrial production managers1.1-18.1
Mechanical drafters1.8-17.2Janitors & cleaners, exc maids & housekeeping cleaners1.1-16.3
Lathe & turning machine tool operators & tenders1.8-26.3Multiple machine tool operators & tenders1.0-9.9
INDUSTRY DATA BY STATE
StateEstablishmentsShipmentsEmploymentCost as % of ShipmentsInvestment per Employee ($)
Total ($ mil)% of U.S.Per Establ.Total Number% of U.S.Per Establ.Wages ($/hour)
Source: 2002 Economic Census. The states are in descending order of shipments or establishments (if shipment data are missing for the majority). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. States marked with (D) are sorted by number of establishments. A dash (-) indicates that the data element cannot be calculated. Data may not show all state sactive in the NAICS category. All data available at the time of publication are shown.
Ohio20125.925.56,295.082230.14119.5844.72,965
Pennsylvania12124.425.210,362.744816.43719.2450.37,446

More From encyclopedia.com

About this article

NAICS 333516 - Rolling Mill Machinery and Equipment Manufacturing

Updated About encyclopedia.com content Print Article

You Might Also Like

    NEARBY TERMS

    NAICS 333516 - Rolling Mill Machinery and Equipment Manufacturing