NAICS 333518 - Metalworking Machinery Manufacturing NEC

views updated

NAICS 333518 - Metalworking Machinery Manufacturing NEC

GENERAL STATISTICS
YearCompaniesEstablishmentsEmploymentCompensationProduction ($ million)
Totalwith 20 or more employeesTotal (000)ProductionPayroll ($ mil)Wages ($/hr)Cost of MaterialsValue Added by ManufactureValue of ShipmentsCapital Invest.
Workers (000)Hours (Mil)
Sources: 1992, 1997, 2002 Economic Census; other years, up to 2006, are from the Annual Survey of Manufactures. Establishment counts for non-Census years are from County Business Patterns; 1997 and 2002 values are from the 1997 and 2002 censuses respectively, reported in the Federal Government's NAICS format. Other years were originally reported in equivalent SIC format. ‘P's show projections by the editors.
1991 29714310.96.514.8358.912.41505.1702.01,150.832.5
199238940016713.27.917.6487.514.05687.6942.71,618.327.6
1993 39017113.98.618.9514.813.77739.81,003.31,711.417.2
1994 37816915.19.822.5593.713.881,147.91,400.42,411.948.5
1995 37717315.99.922.4655.815.481,364.01,551.42,822.362.9
1996 40718016.910.422.7727.516.021,422.31,553.32,976.346.9
199744847422519.011.325.0857.317.601,624.71,790.53,463.879.2
1998 47622119.311.324.6926.219.031,616.21,543.83,395.581.8
1999 47122420.912.827.1970.117.891,851.31,799.63,763.176.4
2000 46022021.012.526.9994.618.291,810.91,874.23,748.974.1
2001 46021020.811.924.3982.318.511,778.01,572.43,415.768.6
200241445518016.89.620.0803.319.931,242.51,621.02,941.461.0
2003 44418113.47.716.1679.020.531,131.11,487.42,629.136.4
2004 40616512.77.114.7694.922.841,172.71,691.62,798.858.1
2005 40116311.46.514.0691.124.581,266.31,517.42,755.343.6
2006 468P198P10.76.013.5651.323.351,220.71,346.22,584.433.4
2007 474P199P15.5P8.7P18.2P881.1P24.32P1,625.9P1,793.1P3,442.4P61.0P
2008 480P201P15.4P8.7P17.9P899.5P25.07P1,663.8P1,834.8P3,522.5P61.9P
2009 486P202P15.4P8.6P17.7P918.0P25.81P1,701.6P1,876.5P3,602.5P62.8P
2010 492P204P15.4P8.5P17.4P936.4P26.55P1,739.4P1,918.3P3,682.6P63.8P
INDICES OF CHANGE
YearCompaniesEstablishmentsEmploymentCompensationProduction ($ million)
Totalwith 20 or more employeesTotal (000)ProductionPayroll ($ mil)Wages ($/hr)Cost of MaterialsValue Added by ManufactureValue of ShipmentsCapital Invest.
Workers (000)Hours (Mil)
Sources: Same as General Statistics. Values reflect change from the base year, 2002. Values above 100 mean greater than 2002, values below 100 mean less than 2002, and the values of 100 in other years means the same as 2002. ‘P's show projections by the editors.
1992948893798288617055585545
199710810412511311812510788131110118130
2001 1011171241241221229314397116112
2002100100100100100100100100100100100100
2003 981018080818510391928960
2004 899276747487115941049595
2005 889168687086123102949471
2006 103P110P6463688111798838855
2007 104P111P92P91P91P110P122P131P111P117P100P
2008 106P112P92P91P89P112P126P134P113P120P101P
2009 107P112P92P90P89P114P130P137P116P122P103P
2010 108P113P92P89P87P117P133P140P118P125P105P
SELECTED RATIOS
For 2002Avg. of All Manufact.Analyzed IndustryIndexFor 2002Avg. of All Manufact.Analyzed IndustryIndex
Sources: Same as General Statistics. The ‘Average of All Manufacturing’ column represents the average of all manufacturing industries reported for the most recent complete year available. The Index shows the relationship between the Average and the Analyzed Industry. For example, 100 means that they are equal; 500 that the Analyzed Industry is five times the average; 50 means that the Analyzed Industry is half the national average. The abbreviation ‘na’ is used to show that data are ‘not available’. Ratios shown for 2002, the last complete census year.
Employees per Establishment423788Value Added per Production Worker182,367168,85493
Payroll per Establishment1,639,1841,765,495108Cost per Establishment5,769,0152,730,76947
Payroll per Employee39,05347,815122Cost per Employee137,44673,95854
Production Workers per Establishment302172Cost per Production Worker195,506129,42766
Wages per Establishment694,845876,044126Shipments per Establishment11,158,3486,464,61558
Wages per Production Worker23,54841,521176Shipments per Employee265,847175,08366
Hours per Production Worker1,9802,083105Shipments per Production Worker378,144306,39681
Wages per Hour11.8919.93168Investment per Establishment361,338134,06637
Value Added per Establishment5,381,3253,562,63766Investment per Employee8,6093,63142
Value Added per Employee128,21096,48875Investment per Production Worker12,2456,35452
LEADING COMPANIES Number shown: 75 Total sales ($ mil): 29,053 Total employment (000): 104.5
Company NameAddress   CEO NamePhoneCo. TypeSales ($ mil)Empl. (000)
Source: Ward's Business Directory of U.S. Private and Public Companies, Volumes 1 and 2, 2008. The company type code used is as follows: P - Public, R - Private, S - Subsidiary, D - Division, J - Joint Venture, A - Affiliate, G - Group. Sales are in millions of dollars, employees are in thousands. An asterisk (*) indicates an estimated sales volume. The symbol < stands for ‘less than’. Company names and addresses are truncated, in some cases, to fit into the available space.
Dover Corp.280 Park Ave.New YorkNY10017 212-922-1640P7,22633.4
Leggett and Platt Inc.PO Box 757CarthageMO64836 417-358-8131P4,30624.0
Lincoln Electric Holdings Inc.22801 St. Clair AveClevelandOH44117 216-481-8100P2,2819.0
Stoody Co.5557 Nashville Rd.Bowling GreenKY42101Paul D. Melnuk270-781-9777S1,537*3.0
Thermadyne Manufacturing101 S Hanley Rd.St. LouisMO63105Paul D. Melnuk314-721-5573S1,537*3.0
Marison Cylinder Co.101 S Hanley Rd.St. LouisMO63105Paul D. Melnuk314-721-5573S1,530*3.0
Modern Engineering CompanyUS Highway I-55 SGallmanMS39077Paul D. Melnuk601-892-3500S1,530*3.0
Thermadyne Industries Inc.16052 SwingleyChesterfieldMO63017Paul D. Melnuk314-721-5573S1,530*3.0
Thermal Dynamics Corp.Industrial Part #DWest LebanonNH03784Paul D. Melnuk603-298-5711S1,530*3.0
Victor Coyne International101 S Hanley Rd.St. LouisMO63105Paul D. Melnuk314-721-5573S1,530*3.0
Victor Gas Systems Inc.960 Brookroad, 1ConshohockenPA19428Paul D. Melnuk314-721-5573S1,530*3.0
Cleveland Formtek Inc.4899 CommerceClevelandOH44128Joe Mayer216-292-6300R372*<0.1
Hardinge Inc.PO Box 1507ElmiraNY14902J. Patrick Ervin607-734-2281P3271.5
Danieli Corp.800 Cranberry WdsCranberry TwpPA16066Mark Brandon724-778-5400R306*<0.1
Park Corp.6200 Riverside Dr.ClevelandOH44135Daniel K. Park216-267-4870R271*3.2
Bradbury Company Inc.PO Box 667MoundridgeKS67107David Bradbury620-345-6394R90*0.3
Almco507 W Front St.Albert LeaMN56007Richard Rocklin507-377-2102S79*<0.1
Ged Integrated Solutions Inc.9280 Dutton Dr.TwinsburgOH44087Ronald Auletta330-963-5401R71*0.1
Weldmation Inc.31720 StephensonMadison HeightsMI48071Arthur Kelsey248-585-0010R71*0.4
Evana Tool and Engineering5825 Old BoonvilleEvansvilleIN47715William Phillips812-479-8246R56*0.3
Morbark Inc.PO Box 1000WinnMI48896Lon Morey989-866-2381R55*0.6
Sunnen Products Co.7910 ManchesterSaint LouisMO63143Matt Kreider314-781-2100R52*0.5
Veri-Tek International Corp.7402 W 100th Pl.BridgeviewIL60455David Langevin708-237-2060P460.3
Thielenhaus Microfinish Corp.42925 W 9 Mile Rd.NoviMI48375Manfred Sieringhaus248-349-9450R45*0.3
Tessy Plastics Corp.PO Box 160ElbridgeNY13060Henry Beck315-689-3924R45*0.5
Van Blarcom Closures Inc.156 Sandford St.BrooklynNY11205Vincent Scuderi718-855-3810R44*0.2
Assembly and Test Worldwide313 Mound St.DaytonOH45402Richard Glennon937-586-5600R40*0.2
Herr-VossPO Box ABCalleryPA16024Walter Stasik724-538-3180S40*0.2
Pines Manufacturing Inc.30505 Clemens Rd.WestlakeOH44145Donald Rebar440-835-5553R39*<0.1
Fori Automation Inc.50955 Wing Dr.Shelby TwpMI48315Bernd Koerner586-247-2336R35*0.2
W.A. Whitney Co.PO Box 1206RockfordIL61105Gary Geller815-964-6771S33*0.2
Automatic Feed Co.476 E RiverviewNapoleonOH43545Kim Beck419-592-0050R32*<0.1
Strippit Inc.12975 Clarence Ctr.AkronNY14001John Lesebbre716-542-4511R32*0.2
Delta Brands Inc.2204 Century Ctr. BIrvingTX75062Samuel Savariego972-438-7150R28*0.2
JR Automation Technologies13365 Tyler St.HollandMI49424Stephen Klotz616-399-2168R27*0.2
Anderson Cook Inc.17650 15 Mile Rd.FraserMI48026Kim Anderson586-293-0800R26*<0.1
Starting USA Corp.1676 Rowe Pkwy.Poplar BluffMO63901Allen Redfearn573-686-9430R25*0.1
Chapman/Leonard Studio Equip.12950 Raymer St.N HollywoodCA91605Leonard Chapman818-764-6726R25*0.2
MIC Industries Inc.PO Box 17369WashingtonDC20041Michael Ansari703-318-1900R25*<0.1
American Amer. Pulverizer Co.5540 W Park Ave.Saint LouisMO63110Chris Griesedieck314-781-6100R25*<0.1
B and K Corp.PO Box 1968SaginawMI48605 989-777-2111R24*0.2
Riviera Tool Co.5460 Executive Pky.Grand RapidsMI49512John C. Kennedy616-698-2100P240.1
Systems, Machines, Automation5807 Van Allen WayCarlsbadCA92008Edward Neff760-929-7575R24*0.1
Advanced Tubing Technology150 Intercraft Dr.StatesvilleNC28625Doug Smyth704-924-7020R23*0.2
Aerial Machine & ToolPO Box 222VestaVA24177John Marcaccio276-952-2006R23*0.2
Golden States Engineering Inc.15338 Garfield Ave.ParamountCA90723Alexandra Rostovski562-634-3125R22*0.1
Wright-K Technology Inc.2025 E GeneseeSaginawMI48601John Sivey989-752-3103R22*0.1
Bud Red Industries Inc.200 B & E Ind. Dr.Red BudIL62278Kalin Liefer618-282-3801R21*0.1
RP Gatta Inc.435 Gentry Dr.AuroraOH44202Raymond Gatta330-562-2288R21*<0.1
C.A. Litzler Co.4800 W 160th St.ClevelandOH44135Matthew Litzler216-267-8020R21*<0.1
ASC Machine Tools Inc.PO Box 11619SpokaneWA99211Ray Griff509-534-6600R21*0.2
Wright Industries Inc.PO Box 17914NashvilleTN37217David Takes615-361-6600R20*0.2
Brenton Engineering Co.4750 Cnty Rd 13AlexandriaMN56308Jeff Bigger320-852-7705R20*0.1
Bardons and Oliver Inc.5800 Harper Rd.ClevelandOH44139Heath Oliver440-498-5800R19*0.1
Mold-A-Matic Corp.147 River St.OneontaNY13820Jack Stanley607-433-2121R19*0.2
WSI Industries Inc.213 Chelsea Rd.MonticelloMN55362 763-295-9202P19<0.1
Mark One Corp.517 Alpine Rd.GaylordMI49735Francis Kestler989-731-3800R18*0.1
Clemco Industries Corp.1 Cable Car Dr.WashingtonMO63090Arnie Sallaverry636-239-0300R18*0.1
Bartell Machinery Systems6321 Elmer Hill Rd.RomeNY13440 315-336-7600R17*<0.1
MAC Products Inc.PO Box 469KearnyNJ07032Edward Gollob973-344-0700R17*0.1
TA Systems Inc.1842 Rochester Ind.Rochester HillsMI48309Tim Gale248-656-5150R17*<0.1
Jessup Engineering Inc.2745 Bond St.Rochester HillsMI48309Ran Jessup248-853-5600R16*<0.1
Dane Systems Inc.7275 Red ArrowStevensvilleMI49127Stephen Klotz269-465-3263R16*<0.1
Manchester Tool and Die Inc.PO Box 326N ManchesterIN46962Barry Blocher260-982-8524R15*<0.1
RWC Inc.PO Box 920Bay CityMI48707William Perlberg989-684-4030R15*0.2
ID Technology Corp.2051 Franklin Dr.Fort WorthTX76106  S15*<0.1
Auto Con Corp.18901 15 Mile Rd.Clinton TwpMI48035Ronald Matheson586-791-7474R15*<0.1
Metro Machine and Engineering8001 Wallace Rd.Eden PrairieMN55344Robert Midness952-937-2800R14*<0.1
Omega Automation Inc.2850 Needmore Rd.DaytonOH45414Alan King937-277-2929R14*<0.1
Haumiller Engineering Co.445 Renner Dr.ElginIL60123Russ Holmer847-695-9111R13*0.1
Rowe Machinery and Mfg. Co.76 Hinckley Rd.ClintonME04927 207-426-2351S13*0.1
HMS Products Co.1200 E Big BeaverTroyMI48083Dave Sofy248-689-8120R13*<0.1
Merrill Tool and Machine Inc.21659 W Gratiot Rd.MerrillMI48637Jeff Merrill989-643-7981R13*<0.1
Pannier Corp.207 Sandusky St.PittsburghPA15212Scott Heddaeus412-323-4900R13*<0.1
Deluxe Stitcher Company Inc.6635 W Irving ParkChicagoIL60634Frank Cangelosi773-777-6500R13*<0.1
MATERIALS CONSUMED
MaterialQuantityDelivered Cost ($ million)
Source: 2002 Economic Census. Explanation of symbols used: (D): Withheld to avoid disclosure of competitive data; na: Not available; (S): Withheld because statistical norms were not met; (X): Not applicable; (Z): Less than half the unit shown; nec: Not elsewhere classified; nsk: Not specified by kind; - : zero; p : 10-19 percent estimated; q : 20-29 percent estimated.
Fluid power pumps, motors, and hydrostatic transmissions(X)17.8
Fluid power cylinders and rotary actuators (hydraulic and pneumatic)(X)11.5
Fluid power filters (hydraulic and pneumatic)(X)1.1
Fluid power hose, tube fittings, and assemblies (hydraulic and pneumatic)(X)4.0
Fluid power valves (hydraulic and pneumatic)(X)12.0
Metal bolts, nuts, screws, and other screw machine products(X)11.7
Other fabricated metal products (exc. fluid power products and forgings)(X)35.6
Forgings(X)1.4
Iron and steel castings (rough and semifinished)(X)34.5
Nonferrous (aluminum, copper, etc.) castings (rough and semifinished)(X)2.8
Steel bars, bar shapes, and plates (exc. castings, forgings, fabr. metal products)(X)27.3
Steel sheet and strip (including tinplate)(X)14.2
Steel structural shapes (exc. castings, forgings, fabr. metal products)(X)6.0
All other steel shapes and forms (exc. castings, forgings, fabr. metal products)(X)5.6
Nonferrous shapes and forms(X)3.0
Fractional horsepower electric timing motors (less than 1 hp)(X)9.6
Other fractional horsepower electric motors (less than 1 hp)(X)10.0
Integral horsepower electric motors and generators (1 hp or more)(X)16.8
Electrical transmission, distribution, and control equipment(X)75.6
Electrical industrial capacitors, resistors, rheostats, and coil windings(X)5.9
Numerical controls, metalworking machinery (exc. programmable)(X)2.6
Programmable controllers for metalworking machinery.(X)20.4
Printed circuit assemblies, loaded boards, and modules(X)11.6
Printed ciruit boards (without inserted components) for electronic circuitry(X)2.1
Semiconductors (incl. transistors, diodes, rectifiers, and integrated circuits), for electronic circuitry(X)3.7
All other miscellaneous components and accessories for electronic circuitry (exc. tubes)(X)7.1
Electrical instrument mechanisms and meter movements(X)4.1
Electronic communication equipment(X)10.0
Optical instruments and lenses (exc. sighting, tracking, and fire control)(X)1.8
Ball bearings (mounted or unmounted)(X)9.3
Roller bearings (mounted or unmounted)(X)6.0
Mechanical speed changers, gears, and industrial high-speed drives(X)12.1
Wood boxes, pallets, skids, and containers(X)3.2
Cutting tools for machine tools(X)7.8
Fabricated plastics products (exc. gaskets, hoses, and belting)(X)11.2
Paper and paperboard containers (incl. shipping sacks and other paper packaging supplies)(X)2.6
All other materials, components, parts, containers, and supplies(X)225.3
Materials, ingredients, containers, and supplies, nsk(X)361.8
PRODUCT SHARE DETAILS
Product or Product Class ShipmentsMil. $Product or Product Class ShipmentsMil. $
Source: 2002 Economic Census. The values are product shipments in millions of dollars for 2002. Total product shipments may be lower or higher than industry shipments. See Introduction for a full discussion. Values of indented subcategories are summed in the main heading(s). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. The abbreviation nsk stands for ‘not specified by kind’ and nec for ‘not elsewhere classified’. A dash (-) means zero.
METALWORKING MACHINERY, NEC2,677.0      (except dies, handheld, and ultrasonic)7.9
  Assembly machines1,829.9      Wire rope and wire cable making machines (except handheld and ultrasonic)5.6
      Rotary transfer metalworking assembly machines (dial and rotary, trunnion, center column)213.1      Other metalworking machines for working wire (except handheld and ultasonic)79.8
      Synchronous inline transfer metalworking assembly machines288.9      Cut-to-length coil handling lines (conversion or straightening) (except handheld and ultrasonic)172.3
      Nonsynchronous inline transfer metalworking assembly machines238.0      Slitting coil handling lines (conversion or straightening) (except handheld and ultrasonic)40.9
      Special-purpose and other types of metalworking assembly machines865.0      Other metalworking machinery (except handheld and ultrasonic)347.4
      Parts and attachments for metalworking assembly machines (sold separately)135.4      Parts and attachments for other metalworking machinery (except handheld and ultrasonic) (sold separately)53.5
      Assembly machines, nsk89.5    Other metalworking machinery (except handheld and ultrasonic), nsk31.0
  Other metalworking machinery (except handheld and ultrasonic)738.3  Metalworking machinery, nec, nsk, total108.8
    Other metalworking machinery (except handheld and ultrasonic)707.4  
      Metalworking draw benches and wiredrawing machines   
INPUTS AND OUTPUTS FOR ROLLING MILL & OTHER METALWORKING MACHINERY
Economic Sector or Industry Providing Inputs%SectorEconomic Sector or Industry Buying Outputs%Sector
Source: Benchmark Input-Output Accounts for the U.S. Economy, 2002, U.S. Department of Commerce, Washington D.C., January 2008. User should note that this Input-Output table is not for this particular narrowly defined industry but for a larger aggregate. Input and Output data for Rolling Mill & Other Metal Working Machinery include Input and Output data for the Annual Survey of Manufactures’ NAICS industries 333516 and 333518. The abbreviation nec stands for ‘not elsewhere classified’.
Compensation of employees36.0 Private fixed investment84.6 
Management of companies & enterprises7.0ServicesEducational services, nec4.4Services
Wholesale trade5.3TradeExports of goods & services3.2Cap Inv
Iron & steel mills & ferroalloys3.3Manufg.Special tools, dies, jigs, & fixtures3.1Manufg.
Relay & industrial controls3.0Manufg.Rolling mill & other metalworking machinery2.8Manufg.
Rolling mill & other metalworking machinery2.8Manufg.Plate work & fabricated structural products0.5Manufg.
Metal cutting & forming machine tools2.8Manufg.Metal tanks (heavy gauge)0.4Manufg.
Motors & generators2.3Manufg.Power boilers & heat exchangers0.4Manufg.
Ferrous metal foundries2.0Manufg.Manufacturing, nec0.3Manufg.
Speed changers, industrial high-speed drives, & gears1.7Manufg.   
Ball & roller bearings1.5Manufg.   
Fluid power process machinery1.4Manufg.   
Machine shops1.3Manufg.   
Real estate1.2Fin/R.E.   
Valve & fittings other than plumbing1.1Manufg.   
Securities, commodity contracts, investments1.0Fin/R.E.   
Turned products & screws, nuts, & bolts0.9Manufg.   
Printed circuit assemblies (electronic assembiles)0.8Manufg.   
Plastics products, nec0.8Manufg.   
Electronic components, nec0.7Manufg.   
Lessors of nonfinancial assets0.6Fin/R.E.   
Advertising & related services0.6Services   
Power generation & supply0.6Util.   
Abrasive products0.6Manufg.   
Custom computer programming services0.6Services   
Truck transportation0.5Util.   
Coating, engraving, heat treating & allied activities0.5Manufg.   
Monetary authorities/depository credit intermediation0.5Fin/R.E.   
Legal services0.5Services   
Architectural, engineering, & related services0.5Services   
Taxes on production & imports, less subsidies0.5    
Cutting tools & machine tool accessories0.5Manufg.   
Broadcast & wireless communications equipment0.5Manufg.   
Scientific research & development services0.4Services   
Professional, scientific, technical services, nec0.4Services   
Data processing, hosting, & related services0.4Services   
Electronic capacitors, resistors, coils, transformers0.4Manufg.   
Telecommunications0.4Services   
Accounting, tax preparation, bookkeeping, & payroll0.4Services   
Automotive equipment rental & leasing0.3Fin/R.E.   
Semiconductors & related devices0.3Manufg.   
Warehousing & storage0.3Util.   
Plastics packaging materials, film & sheet0.3Manufg.   
Chemical products & preparations, nec0.3Manufg.   
Food services & drinking places0.3Services   
Management, scientific, & technical consulting0.3Services   
Forging, stamping, & sintering, nec0.3Manufg.   
Motor vehicle parts0.2Manufg.   
Fabricated metals, nec0.2Manufg.   
Wood containers & pallets0.2Manufg.   
Custom roll forming0.2Manufg.   
Metal cans, boxes, & other containers (light gauge)0.2Manufg.   
Unlaminated plastics profile shapes0.2Manufg.   
Electricity & signal testing instruments0.2Manufg.   
Hotels & motels, including casino hotels0.2Services   
Nonferrous metal foundries0.2Manufg.   
Natural gas distribution0.2Util.   
Services to buildings & dwellings0.2Services   
Maintenance/repair of nonresidential structures0.2Construct.   
Rubber products, nec0.2Manufg.   
Commercial & industrial machinery rental & leasing0.2Fin/R.E.   
Postal service0.2Util.   
Other computer related services, including facilities0.2Services   
Business support services0.2Services   
Electrical equipment & components, nec0.1Manufg.   
Plate work & fabricated structural products0.1Manufg.   
Nondepository credit intermediation activities0.1Fin/R.E.   
Air transportation0.1Util.   
Crowns & closures & metal stamping0.1Manufg.   
Paperboard containers0.1Manufg.   
Employment services0.1Services   
Handtools0.1Manufg.   
Paperboard mills0.1Manufg.   
Specialized design services0.1Services   
Automotive repair & maintenance, ex. car washes0.1Services   
Bare printed circuit boards0.1Manufg.   
General purpose machinery, nec0.1Manufg.   
OCCUPATIONS EMPLOYED BY METALWORKING MACHINERY MANUFACTURING
Occupation% of Total 2006Change to 2016Occupation% of Total 2006Change to 2016
Source: Industry-Occupation Matrix, Bureau of Labor Statistics, December 4, 2007. These data are reported based on 4-digit NAICS categories but have been matched to corresponding 6-digit NAICS industry codes. The change reported for each occupation to the year 2016 is a percent of growth or decline as estimated by the Bureau of Labor Statistics. The abbreviation nec stands for ‘not elsewhere classified’.
Machinists12.8-14.0Office clerks, general1.7-19.3
Tool & die makers11.0-14.0Shipping, receiving, & traffic clerks1.6-21.2
Computer-controlled machine tool operators5.4-9.9Welders, cutters, solderers, & brazers1.6-12.9
First-line supervisors/managers of production workers4.6-18.1Bookkeeping, accounting, & auditing clerks1.5-18.1
Grinding, lapping, polishing machine tool operators3.3-20.6Helpers--Production workers1.4-18.1
Cutting, punching, & press machine operators3.2-26.3Sales reps, wholesale & manufacturing, exc tech1.4-18.1
Team assemblers2.9-18.1Tool grinders, filers, & sharpeners1.4-26.3
Molding, coremaking, & casting machine operators2.8-26.3Numerical tool & process control programmers1.3-15.6
Mechanical engineers2.2-18.1Milling & planing machine operators & tenders1.3-26.3
General & operations managers2.0-26.3Maintenance & repair workers, general1.3-18.1
Inspectors, testers, sorters, samplers, & weighers2.0-22.8Industrial production managers1.1-18.1
Mechanical drafters1.8-17.2Janitors & cleaners, exc maids & housekeeping cleaners1.1-16.3
Lathe & turning machine tool operators & tenders1.8-26.3Multiple machine tool operators & tenders1.0-9.9
INDUSTRY DATA BY STATE
StateEstablishmentsShipmentsEmploymentCost as % of ShipmentsInvestment per Employee ($)
Total ($ mil)% of U.S.Per Establ.Total Number% of U.S.Per Establ.Wages ($/hour)
Source: 2002 Economic Census. The states are in descending order of shipments or establishments (if shipment data are missing for the majority). The symbol (D) appears when data are withheld to prevent disclosure of competitive information. States marked with (D) are sorted by number of establishments. A dash (-) indicates that the data element cannot be calculated. Data may not show all states active in the NAICS category. All data available at the time of publication are shown.3
Michigan911,063.536.211,687.35,01129.95521.4442.02,838
Illinois45369.812.68,217.81,69710.13819.0837.95,202
Ohio41248.08.46,048.41,5389.23821.1539.73,102
New York18126.74.37,037.29905.95519.6445.12,380
Wisconsin1991.53.14,816.27364.43916.6945.51,704
Massachusetts1688.43.05,525.44052.42517.0249.012,679
Pennsylvania2272.32.53,285.86814.13116.8632.42,617
Minnesota1265.22.25,430.33682.23124.4049.7856
Texas1358.92.04,530.23932.33013.3540.32,249
Florida1055.41.95,543.13061.83116.8543.23,101
Oregon642.51.47,079.73382.05621.8043.61,109
New Jersey1036.31.23,625.31871.11916.8428.311,059
North Carolina725.10.93,588.72351.43411.6239.65,545

More From encyclopedia.com

About this article

NAICS 333518 - Metalworking Machinery Manufacturing NEC

Updated About encyclopedia.com content Print Article

You Might Also Like

    NEARBY TERMS

    NAICS 333518 - Metalworking Machinery Manufacturing NEC