Frame of Reference

views updated May 29 2018

FRAME OF REFERENCE

CONCEPT

Among the many specific concepts the student of physics must learn, perhaps none is so deceptively simple as frame of reference. On the surface, it seems obvious that in order to make observations, one must do so from a certain point in space and time. Yet, when the implications of this idea are explored, the fuller complexities begin to reveal themselves. Hence the topic occurs at least twice in most physics textbooks: early on, when the simplest principles are explainedand near the end, at the frontiers of the most intellectually challenging discoveries in science.

HOW IT WORKS

There is an old story from India that aptly illustrates how frame of reference affects an understanding of physical properties, and indeed of the larger setting in which those properties are manifested. It is said that six blind men were presented with an elephant, a creature of which they had no previous knowledge, and each explained what he thought the elephant was.

The first felt of the elephant's side, and told the others that the elephant was like a wall. The second, however, grabbed the elephant's trunk, and concluded that an elephant was like a snake. The third blind man touched the smooth surface of its tusk, and was impressed to discover that the elephant was a hard, spear-like creature. Fourth came a man who touched the elephant's legs, and therefore decided that it was like a tree trunk. However, the fifth man, after feeling of its tail, disdainfully announced that the elephant was nothing but a frayed piece of rope. Last of all, the sixth blind man, standing beside the elephant's slowly flapping ear, felt of the ear itself and determined that the elephant was a sort of living fan.

These six blind men went back to their city, and each acquired followers after the manner of religious teachers. Their devotees would then argue with one another, the snake school of thought competing with adherents of the fan doctrine, the rope philosophy in conflict with the tree trunk faction, and so on. The only person who did not join in these debates was a seventh blind man, much older than the others, who had visited the elephant after the other six.

While the others rushed off with their separate conclusions, the seventh blind man had taken the time to pet the elephant, to walk all around it, to smell it, to feed it, and to listen to the sounds it made. When he returned to the city and found the populace in a state of uproar between the six factions, the old man laughed to himself: he was the only person in the city who was not convinced he knew exactly what an elephant was like.

Understanding Frame of Reference

The story of the blind men and the elephant, within the framework of Indian philosophy and spiritual beliefs, illustrates the principle of syadvada. This is a concept in the Jain religion related to the Sanskrit word syat, which means "may be." According to the doctrine of syadvada, no judgment is universal; it is merely a function of the circumstances in which the judgment is made.

On a complex level, syadvada is an illustration of relativity, a topic that will be discussed later; more immediately, however, both syadvada and the story of the blind men beautifully illustrate the ways that frame of reference affects perceptions. These are concerns of fundamental importance both in physics and philosophy, disciplines that once were closely allied until each became more fully defined and developed. Even in the modern era, long after the split between the two, each in its own way has been concerned with the relationship between subject and object.

These two terms, of course, have numerous definitions. Throughout this book, for instance, the word "object" is used in a very basic sense, meaning simply "a physical object" or "a thing." Here, however, an object may be defined as something that is perceived or observed. As soon as that definition is made, however, a flaw becomes apparent: nothing is just perceived or observed in and of itselfthere has to be someone or something that actually perceives or observes. That something or someone is the subject, and the perspective from which the subject perceives or observes the object is the subject's frame of reference.

AMERICA AND CHINA: FRAME OF REFERENCE IN PRACTICE.

An old jokethough not as old as the story of the blind mengoes something like this: "I'm glad I wasn't born in China, because I don't speak Chinese." Obviously, the humor revolves around the fact that if the speaker were born in China, then he or she would have grown up speaking Chinese, and English would be the foreign language.

The difference between being born in America and speaking English on the one handeven if one is of Chinese descentor of being born in China and speaking Chinese on the other, is not just a contrast of countries or languages. Rather, it is a difference of worldsa difference, that is, in frame of reference.

Indeed, most people would see a huge distinction between an English-speaking American and a Chinese-speaking Chinese. Yet to a visitor from another planetsomeone whose frame of reference would be, quite literally, otherworldlythe American and Chinese would have much more in common with each other than either would with the visitor.

The View from Outside and Inside

Now imagine that the visitor from outer space (a handy example of someone with no preconceived ideas) were to land in the United States. If the visitor landed in New York City, Chicago, or Los Angeles, he or she would conclude that America is a very crowded, fast-paced country in which a number of ethnic groups live in close proximity. But if the visitor first arrived in Iowa or Nebraska, he or she might well decide that the United States is a sparsely populated land, economically dependent on agriculture and composed almost entirely of Caucasians.

A landing in San Francisco would create a falsely inflated impression regarding the number of Asian Americans or Americans of Pacific Island descent, who actually make up only a small portion of the national population. The same would be true if one first arrived in Arizona or New Mexico, where the Native American population is much higher than for the nation as a whole. There are numerous other examples to be made in the same vein, all relating to the visitors' impressions of the population, economy, climate, physical features, and other aspects of a specific place. Without consulting some outside reference pointsay, an almanac or an atlasit would be impossible to get an accurate picture of the entire country.

The principle is the same as that in the story of the blind men, but with an important distinction: an elephant is an example of an identifiable species, whereas the United States is a unique entity, not representative of some larger class of thing. (Perhaps the only nation remotely comparable is Brazil, also a vast land settled by outsiders and later populated by a number of groups.) Another important distinction between the blind men story and the United States example is the fact that the blind men were viewing the elephant from outside, whereas the visitor to America views it from inside. This in turn reflects a difference in frame of reference relevant to the work of a scientist: often it is possible to view a process, event, or phenomenon from outside; but sometimes one must view it from insidewhich is more challenging.

Frame of Reference in Science

Philosophy (literally, "love of knowledge") is the most fundamental of all disciplines: hence, most persons who complete the work for a doctorate receive a "doctor of philosophy" (Ph.D.) degree. Among the sciences, physicsa direct offspring of philosophy, as noted earlieris the most fundamental, and frame of reference is among its most basic concepts.

Hence, it is necessary to take a seemingly backward approach in explaining how frame of reference works, examining first the broad applications of the principle and then drawing upon its specific relation to physics. It makes little sense to discuss first the ways that physicists apply frame of reference, and only then to explain the concept in terms of everyday life. It is more meaningful to relate frame of reference first to familiar, or at least easily comprehensible, experiencesas has been done.

At this point, however, it is appropriate to discuss how the concept is applied to the sciences. People use frame of reference every dayindeed, virtually every momentof their lives, without thinking about it. Rare indeed is the person who "walks a mile in another person's shoes"that is, someone who tries to see events from the viewpoint of another. Physicists, on the other hand, have to be acutely aware of their frame of reference. Moreover, they must "rise above" their frame of reference in the sense that they have to take it into account in making calculations. For physicists in particular, and scientists in general, frame of reference has abundant "real-life applications."

REAL-LIFE APPLICATIONS

Points and Graphs

There is no such thing as an absolute frame of referencethat is, a frame of reference that is fixed, and not dependent on anything else. If the entire universe consisted of just two points, it would be impossible (and indeed irrelevant) to say which was to the right of the other. There would be no right and left: in order to have such a distinction, it is necessary to have a third point from which to evaluate the other two points.

As long as there are just two points, there is only one dimension. The addition of a third pointas long as it does not lie along a straight line drawn through the first two pointscreates two dimensions, length and width. From the frame of reference of any one point, then, it is possible to say which of the other two points is to the right.

Clearly, the judgment of right or left is relative, since it changes from point to point. A more absolute judgment (but still not a completely absolute one) would only be possible from the frame of reference of a fourth point. But to constitute a new dimension, that fourth point could not lie on the same plane as the other three pointsmore specifically, it should not be possible to create a single plane that encompasses all four points.

Assuming that condition is met, however, it then becomes easier to judge right and left. Yet right and left are never fully absolute, a fact easily illustrated by substituting people for points. One may look at two objects and judge which is to the right of the other, but if one stands on one's head, then of course right and left become reversed.

Of course, when someone is upside-down, the correct orientation of left and right is still fairly obvious. In certain situations observed by physicists and other scientists, however, orientation is not so simple. It then becomes necessary to assign values to various points, and for this, scientists use tools such as the Cartesian coordinate system.

COORDINATES AND AXES.

Though it is named after the French mathematician and philosopher René Descartes (1596-1650), who first described its principles, the Cartesian system owes at least as much to Pierre de Fermat (1601-1665). Fermat, a brilliant French amateur mathematicianamateur in the sense that he was not trained in mathematics, nor did he earn a living from that disciplinegreatly developed the Cartesian system.

A coordinate is a number or set of numbers used to specify the location of a point on a line, on a surface such as a plane, or in space. In the Cartesian system, the x-axis is the horizontal line of reference, and the y-axis the vertical line of reference. Hence, the coordinate (0, 0) designates the point where the x-and y-axes meet. All numbers to the right of 0 on the x-axis, and above 0 on the y-axis, have a positive value, while those to the left of 0 on the x-axis, or below 0 on the y-axis have a negative value.

This version of the Cartesian system only accounts for two dimensions, however; therefore, a z-axis, which constitutes a line of reference for the third dimension, is necessary in three-dimensional graphs. The z-axis, too, meets the x-and y-axes at (0, 0), only now that point is designated as (0, 0, 0).

In the two-dimensional Cartesian system, the x-axis equates to "width" and the y-axis to "height." The introduction of a z-axis adds the dimension of "depth"though in fact, length, width, and height are all relative to the observer's frame of reference. (Most representations of the three-axis system set the x-and y-axes along a horizontal plane, with the z-axis perpendicular to them.) Basic studies in physics, however, typically involve only the x-and y-axes, essential to plotting graphs, which, in turn, are integral to illustrating the behavior of physical processes.

THE TRIPLE POINT.

For instance, there is a phenomenon known as the "triple point," which is difficult to comprehend unless one sees it on a graph. For a chemical compound such as water or carbon dioxide, there is a point at which it is simultaneously a liquid, a solid, and a vapor. This, of course, seems to go against common sense, yet a graph makes it clear how this is possible.

Using the x-axis to measure temperature and the y-axis pressure, a number of surprises become apparent. For instance, most people associate water as a vapor (that is, steam) with very high temperatures. Yet water can also be a vaporfor example, the mist on a winter morningat relatively low temperatures and pressures, as the graph shows.

The graph also shows that the higher the temperature of water vapor, the higher the pressure will be. This is represented by a line that curves upward to the right. Note that it is not a straight line along a 45° angle: up to about 68°F (20°C), temperature increases at a somewhat greater rate than pressure does, but as temperature gets higher, pressure increases dramatically.

As everyone knows, at relatively low temperatures water is a solidice. Pressure, however, is relatively high: thus on a graph, the values of temperatures and pressure for ice lie above the vaporization curve, but do not extend to the right of 32°F (0°C) along the x-axis. To the right of 32°F, but above the vaporization curve, are the coordinates representing the temperature and pressure for water in its liquid state.

Water has a number of unusual properties, one of which is its response to high pressures and low temperatures. If enough pressure is applied, it is possible to melt icethus transforming it from a solid to a liquidat temperatures below the normal freezing point of 32°F. Thus, the line that divides solid on the left from liquid on the right is not exactly parallel to the y-axis: it slopes gradually toward the y-axis, meaning that at ultra-high pressures, water remains liquid even though it is well below the freezing point.

Nonetheless, the line between solid and liquid has to intersect the vaporization curve somewhere, and it doesat a coordinate slightly above freezing, but well below normal atmospheric pressure. This is the triple point, and though "common sense" might dictate that a thing cannot possibly be solid, liquid, and vapor all at once, a graph illustrating the triple point makes it clear how this can happen.

Numbers

In the above discussionand indeed throughout this bookthe existence of the decimal, or base-10, numeration system is taken for granted. Yet that system is a wonder unto itself, involving a complicated interplay of arbitrary and real values. Though the value of the number 10 is absolute, the expression of it (and its use with other numbers) is relative to a frame of reference: one could just as easily use a base-12 system.

Each numeration system has its own frame of reference, which is typically related to aspects of the human body. Thus throughout the course of history, some societies have developed a base-2 system based on the two hands or arms of a person. Others have used the fingers on one hand (base-5) as their reference point, or all the fingers and toes (base-20). The system in use throughout most of the world today takes as its frame of reference the ten fingers used for basic counting.

COEFFICIENTS.

Numbers, of course, provide a means of assigning relative values to a variety of physical characteristics: length, mass, force, density, volume, electrical charge, and so on. In an expression such as "10 meters," the numeral 10 is a coefficient, a number that serves as a measure for some characteristic or property. A coefficient may also be a factor against which other values are multiplied to provide a desired result.

For instance, the figure 3.141592, better known as pi (π), is a well-known coefficient used in formulae for measuring the circumference or area of a circle. Important examples of coefficients in physics include those for static and sliding friction for any two given materials. A coefficient is simply a numbernot a value, as would be the case if the coefficient were a measure of something.

Standards of Measurement

Numbers and coefficients provide a convenient lead-in to the subject of measurement, a practical example of frame of reference in all sciencesand indeed, in daily life. Measurement always requires a standard of comparison: something that is fixed, against which the value of other things can be compared. A standard may be arbitrary in its origins, but once it becomes fixed, it provides a frame of reference.

Lines of longitude, for instance, are measured against an arbitrary standard: the "Prime Meridian" running through Greenwich, England. An imaginary line drawn through that spot marks the line of reference for all longitudinal measures on Earth, with a value of 0°. There is nothing special about Greenwich in any profound scientific sense; rather, its place of importance reflects that of England itself, which ruled the seas and indeed much of the world at the time the Prime Meridian was established.

The Equator, on the other hand, has a firm scientific basis as the standard against which all lines of latitude are measured. Yet today, the coordinates of a spot on Earth's surface are given in relation to both the Equator and the Prime Meridian.

CALIBRATION.

Calibration is the process of checking and correcting the performance of a measuring instrument or device against the accepted standard. America's preeminent standard for the exact time of day, for instance, is the United States Naval Observatory in Washington, D.C. Thanks to the Internet, people all over the country can easily check the exact time, and correct their clocks accordingly.

There are independent scientific laboratories responsible for the calibration of certain instruments ranging from clocks to torque wrenches, and from thermometers to laser beam power analyzers. In the United States, instruments or devices with high-precision applicationsthat is, those used in scientific studies, or by high-tech industriesare calibrated according to standards established by the National Institute of Standards and Technology (NIST).

THE VALUE OF STANDARDIZATION TO A SOCIETY.

Standardization of weights and measures has always been an important function of government. When Ch'in Shih-huang-ti (259-210 b.c.) united China for the first time, becoming its first emperor, he set about standardizing units of measure as a means of providing greater unity to the countrythus making it easier to rule.

More than 2,000 years later, another empireRussiawas negatively affected by its failure to adjust to the standards of technologically advanced nations. The time was the early twentieth century, when Western Europe was moving forward at a rapid pace of industrialization. Russia, by contrast, lagged behindin part because its failure to adopt Western standards put it at a disadvantage.

Train travel between the West and Russia was highly problematic, because the width of railroad tracks in Russia was different than in Western Europe. Thus, adjustments had to be performed on trains making a border crossing, and this created difficulties for passenger travel. More importantly, it increased the cost of transporting freight from East to West.

Russia also used the old Julian calendar, as opposed to the Gregorian calendar adopted throughout much of Western Europe after 1582. Thus October 25, 1917, in the Julian calendar of old Russia translated to November 7, 1917 in the Gregorian calendar used in the West. That date was not chosen arbitrarily: it was then that Communists, led by V. I. Lenin, seized power in the weakened former Russian Empire.

METHODS OF DETERMINING STANDARDS.

It is easy to understand, then, why governments want to standardize weights and measuresas the U.S. Congress did in 1901, when it established the Bureau of Standards (now NIST) as a nonregulatory agency within the Commerce Department. Today, NIST maintains a wide variety of standard definitions regarding mass, length, temperature, and so forth, against which other devices can be calibrated.

Note that NIST keeps on hand definitions rather than, say, a meter stick or other physical model. When the French government established the metric system in 1799, it calibrated the value of a kilogram according to what is now known as the International Prototype Kilogram, a platinum-iridium cylinder housed near Sévres in France. In the years since then, the trend has moved away from such physical expressions of standards, and toward standards based on a constant figure. Hence, the meter is defined as the distance light travels in a vacuum (an area of space devoid of air or other matter) during the interval of 1/299,792,458 of a second.

METRIC VS. BRITISH.

Scientists almost always use the metric system, not because it is necessarily any less arbitrary than the British or English system (pounds, feet, and so on), but because it is easier to use. So universal is the metric system within the scientific community that it is typically referred to simply as SI, an abbreviation of the French Système International d'Unités that is, "International System of Units."

The British system lacks any clear frame of reference for organizing units: there are 12 inches in a foot, but 3 feet in a yard, and 1,760 yards in a mile. Water freezes at 32°F instead of 0°, as it does in the Celsius scale associated with the metric system. In contrast to the English system, the metric system is neatly arranged according to the base-10 numerical framework: 10 millimeters to a centimeter, 100 centimeters to a meter, 1,000 meters to kilometer, and so on.

The difference between the pound and the kilogram aptly illustrates the reason scientists in general, and physicists in particular, prefer the metric system. A pound is a unit of weight, meaning that its value is entirely relative to the gravitational pull of the planet on which it is measured. A kilogram, on the other hand, is a unit of mass, and does not change throughout the universe. Though the basis for a kilogram may not ultimately be any more fundamental than that for a pound, it measures a quality thatunlike weightdoes not vary according to frame of reference.

Frame of Reference in Classical Physics and Astronomy

Mass is a measure of inertia, the tendency of a body to maintain constant velocity. If an object is at rest, it tends to remain at rest, or if in motion, it tends to remain in motion unless acted upon by some outside force. This, as identified by the first law of motion, is inertiaand the greater the inertia, the greater the mass.

Physicists sometimes speak of an "inertial frame of reference," or one that has a constant velocitythat is, an unchanging speed and direction. Imagine if one were on a moving bus at constant velocity, regularly tossing a ball in the air and catching it. It would be no more difficult to catch the ball than if the bus were standing still, and indeed, there would be no way of determining, simply from the motion of the ball itself, that the bus was moving.

But what if the inertial frame of reference suddenly became a non-inertial frame of referencein other words, what if the bus slammed on its brakes, thus changing its velocity? While the bus was moving forward, the ball was moving along with it, and hence, there was no relative motion between them. By stopping, the bus responded to an "outside" forcethat is, its brakes. The ball, on the other hand, experienced that force indirectly. Hence, it would continue to move forward as before, in accordance with its own inertiaonly now it would be in motion relative to the bus.

ASTRONOMY AND RELATIVE MOTION.

The idea of relative motion plays a powerful role in astronomy. At every moment, Earth is turning on its axis at about 1,000 MPH (1,600 km/h) and hurtling along its orbital path around the Sun at the rate of 67,000 MPH (107,826 km/h.) The fastest any human beingthat is, the astronauts taking part in the Apollo missions during the late 1960shas traveled is about 30% of Earth's speed around the Sun.

Yet no one senses the speed of Earth's movement in the way that one senses the movement of a caror indeed the way the astronauts perceived their speed, which was relative to the Moon and Earth. Of course, everyone experiences the results of Earth's movementthe change from night to day, the precession of the seasonsbut no one experiences it directly. It is simply impossible, from the human frame of reference, to feel the movement of a body as large as Earthnot to mention larger progressions on the part of the Solar System and the universe.

FROM ASTRONOMY TO PHYSICS.

The human body is in an inertial frame of reference with regard to Earth, and hence experiences no relative motion when Earth rotates or moves through space. In the same way, if one were traveling in a train alongside another train at constant velocity, it would be impossible to perceive that either train was actually movingunless one referred to some fixed point, such as the trees or mountains in the background. Likewise, if two trains were sitting side by side, and one of them started to move, the relative motion might cause a person in the stationary train to believe that his or her train was the one moving.

For any measurement of velocity, and hence, of acceleration (a change in velocity), it is essential to establish a frame of reference. Velocity and acceleration, as well as inertia and mass, figured heavily in the work of Galileo Galilei (1564-1642) and Sir Isaac Newton (1642-1727), both of whom may be regarded as "founding fathers" of modern physics. Before Galileo, however, had come Nicholas Copernicus (1473-1543), the first modern astronomer to show that the Sun, and not Earth, is at the center of "the universe"by which people of that time meant the Solar System.

In effect, Copernicus was saying that the frame of reference used by astronomers for millennia was incorrect: as long as they believed Earth to be the center, their calculations were bound to be wrong. Galileo and later Newton, through their studies in gravitation, were able to prove Copernicus's claim in terms of physics.

At the same time, without the understanding of a heliocentric (Sun-centered) universe that he inherited from Copernicus, it is doubtful that Newton could have developed his universal law of gravitation. If he had used Earth as the center-point for his calculations, the results would have been highly erratic, and no universal law would have emerged.

Relativity

For centuries, the model of the universe developed by Newton stood unchallenged, and even today it identifies the basic forces at work when speeds are well below that of the speed of light. However, with regard to the behavior of light itselfwhich travels at 186,000 mi (299,339 km) a secondAlbert Einstein (1879-1955) began to observe phenomena that did not fit with Newtonian mechanics. The result of his studies was the Special Theory of Relativity, published in 1905, and the General Theory of Relativity, published a decade later. Together these altered humanity's view of the universe, and ultimately, of reality itself.

Einstein himself once offered this charming explanation of his epochal theory: "Put your hand on a hot stove for a minute, and it seems like an hour. Sit with a pretty girl for an hour, and it seems like a minute. That's relativity." Of course, relativity is not quite as simple as thatthough the mathematics involved is no more challenging than that of a high-school algebra class. The difficulty lies in comprehending how things that seem impossible in the Newtonian universe become realities near the speed of light.

PLAYING TRICKS WITH TIME.

An exhaustive explanation of relativity is far beyond the scope of the present discussion. What is important is the central precept: that no measurement of space or time is absolute, but depends on the relative motion of the observer (that is, the subject) and the observed (the object). Einstein further established that the movement of time itself is relative rather than absolute, a fact that would become apparent at speeds close to that of light. (His theory also showed that it is impossible to surpass that speed.)

Imagine traveling on a spaceship at nearly the speed of light while a friend remains stationary on Earth. Both on the spaceship and at the friend's house on Earth, there is a TV camera trained on a clock, and a signal relays the image from space to a TV monitor on Earth, and vice versa. What the TV monitor reveals is surprising: from your frame of reference on the spaceship, it seems that time is moving more slowly for your friend on Earth than for you. Your friend thinks exactly the same thingonly, from the friend's perspective, time on the spaceship is moving more slowly than time on Earth. How can this happen?

Again, a full explanationrequiring reference to formulae regarding time dilation, and so onwould be a rather involved undertaking. The short answer, however, is that which was stated above: no measurement of space or time is absolute, but each depends on the relative motion of the observer and the observed. Put another way, there is no such thing as absolute motion, either in the three dimensions of space, or in the fourth dimension identified by Einstein, time. All motion is relative to a frame of reference.

RELATIVITY AND ITS IMPLICATIONS.

The ideas involved in relativity have been verified numerous times, and indeed the only reason why they seem so utterly foreign to most people is that humans are accustomed to living within the Newtonian framework. Einstein simply showed that there is no universal frame of reference, and like a true scientist, he drew his conclusions entirely from what the data suggested. He did not form an opinion, and only then seek the evidence to confirm it, nor did he seek to extend the laws of relativity into any realm beyond that which they described.

Yet British historian Paul Johnson, in his unorthodox history of the twentieth century, Modern Times (1983; revised 1992), maintained that a world disillusioned by World War I saw a moral dimension to relativity. Describing a set of tests regarding the behavior of the Sun's rays around the planet Mercury during an eclipse, the book begins with the sentence: "The modern world began on 29 May 1919, when photographs of a solar eclipse, taken on the Island of Principe off West Africa and at Sobral in Brazil, confirmed the truth of a new theory of the universe."

As Johnson went on to note,"for most people, to whom Newtonian physics were perfectly comprehensible, relativity never became more than a vague source of unease. It was grasped that absolute time and absolute length had been dethroned. All at once, nothing seemed certain in the spheres. At the beginning of the 1920s the belief began to circulate, for the first time at a popular level, that there were no longer any absolutes: of time and space, of good and evil, of knowledge, above all of value. Mistakenly but perhaps inevitably, relativity became confused with relativism."

Certainly many people agree that the twentieth centuryan age that saw unprecedented mass murder under the dictatorships of Adolf Hitler and Josef Stalin, among otherswas characterized by moral relativism, or the belief that there is no right or wrong. And just as Newton's discoveries helped usher in the Age of Reason, when thinkers believed it was possible to solve any problem through intellectual effort, it is quite plausible that Einstein's theory may have had this negative moral effect.

If so, this was certainly not Einstein's intention. Aside from the fact that, as stated, he did not set out to describe anything other than the physical behavior of objects, he continued to believe that there was no conflict between his ideas and a belief in an ordered universe: "Relativity," he once said, "teaches us the connection between the different descriptions of one and the same reality."

WHERE TO LEARN MORE

Beiser, Arthur. Physics, 5th ed. Reading, MA: Addison-Wesley, 1991.

Fleisher, Paul. Relativity and Quantum Mechanics: Principles of Modern Physics. Minneapolis, MN: Lerner Publications, 2002.

"Frame of Reference" (Web site). <http://www.physics.reading.ac.uk/units/flap/glossary/ff/frameref.html> (March 21, 2001).

"Inertial Frame of Reference" (Web site). <http://id.mind.net/~zona/mstm/physics/mechanics/framesOfReference/inertialFrame.html> (March 21, 2001).

Johnson, Paul. Modern Times: The World from the Twenties to the Nineties. Revised edition. New York: HarperPerennial, 1992.

King, Andrew. Plotting Points and Position. Illustrated by Tony Kenyon. Brookfield, CT: Copper Beech Books, 1998.

Parker, Steve. Albert Einstein and Relativity. New York: Chelsea House, 1995.

Robson, Pam. Clocks, Scales, and Measurements. New York: Gloucester Press, 1993.

Rutherford, F. James; Gerald Holton; and Fletcher G. Watson. Project Physics. New York: Holt, Rinehart, and Winston, 1981.

Swisher, Clarice. Relativity: Opposing Viewpoints. San Diego, CA: Greenhaven Press, 1990.

KEY TERMS

ABSOLUTE:

Fixed; not dependent on anything else. The value of 10 is absolute, relating to unchanging numerical principles; on the other hand, the value of 10 dollars is relative, reflecting the economy, inflation, buying power, exchange rates with other currencies, etc.

CALIBRATION:

The process of checking and correcting the performance of a measuring instrument or device against a commonly accepted standard.

CARTESIAN COORDINATE SYSTEM:

A method of specifying coordinates in relation to an x-axis, y-axis, and z-axis. The system is named after the French mathematician and philosopher René Descartes (1596-1650), who first described its principles, but it was developed greatly by French mathematician and philosopher Pierre de Fermat (1601-1665).

COEFFICIENT:

A number that serves as a measure for some characteristic or property. A coefficient may also be a factor against which other values are multiplied to provide a desired result.

COORDINATE:

A number or set of numbers used to specify the location of a point on a line, on a surface such as aplane, or in space.

FRAME OF REFERENCE:

The perspective of a subject in observing an object.

OBJECT:

Something that is perceived or observed by a subject.

RELATIVE:

Dependent on something else for its value or for other identifyingqualities. The fact that the United States has a constitution is an absolute, but th efact that it was ratified in 1787 is relative: that date has meaning only within the Western calendar.

SUBJECT:

Something (usually a person) that perceives or observes an object and/or its behavior.

X-AXIS:

The horizontal line of reference for points in the Cartesian coordinatesystem.

Y-AXIS:

The vertical line of reference for points in the Cartesian coordinate system.

Z-AXIS:

In a three-dimensional version of the Cartesian coordinate system, the z-axis is the line of reference for points in the third dimension. Typically the x-axisequates to "width," the y-axis to "height," and the z-axis to "depth"though in factlength, width, and height are all relative to the observer's frame of reference.

frame of reference

views updated Jun 11 2018

frame of ref·er·ence • n. a set of criteria or stated values in relation to which measurements or judgments can be made: the observer interprets what he sees in terms of his own cultural frame of reference. ∎  (also reference frame) a system of geometric axes in relation to which measurements of size, position, or motion can be made.

More From encyclopedia.com