Indoor Air Pollution

views updated

Indoor Air Pollution


Indoor air pollution is the presence of one or more contaminants indoors that carry a certain degree of human health risk. Indoor air issues may be traced to the beginning of civilization. Prehistoric records note the problem of smoke in caves. However, over the last three decades the public has become more aware of indoor air pollution. Various studies show that people spend 65 to 90 percent of their time indoors; 65 percent of that time is spent at home. Field studies of human exposure to air pollutants indicate that indoor air levels of many pollutants may be two to five times, and on occasion more than one hundred times, higher than outdoor levels.

MAJOR INDOOR AIR POLLUTANTS, SOURCES, HEALTH EFFECTS AND CONTROL
PollutantsSourcesHealth EffectsWhat To Do
source: adapted from u.s. environmental protection agency and consumer product safety commission.
By-products of combustion (such as CO, CO2, NOx)Unvented kerosene and gas heaters, gas appliances, wood- and gas-burning fireplaces, leaking chimneys and furnaces, tobacco smoke, automobile exhaust in attached garagesEye, nose, and throat irritation, impaired lung function and respiratory function in children, bronchitis, lung cancer, flu-like symptoms.1. Avoid use of unvented gas or kerosene space heaters
   2. Keep gas appliances and furnaces properly adjusted
   3. Install and use exhaust fans
   4. Change filters on heating/cooling systems and air cleaners
   5. Increase of supply of outside air
   6. Proper location of air intakes to avoid exhaust from vehicles
Environmental tobacco smokeCigarettes, cigars, pipesEye, nose, and throat irritation, headaches, pneumonia. Increased risk of respiratory and ear infections in children. Lung cancer and increased risk of heart disease.1. Stop smoking
   2. Discourage others from smoking
   3. Isolate smokers outdoors
FormaldehydePressed wood products (hardwood, plywood wall paneling, particleboard, fiberboard) used in buildings and furniture, urea-formaldehyde foam insulation, permanent press textiles, glue, ETS, vehicle exhaust, stoves, fireplacesEye, nose, and throat irritation, coughing, fatigue, rashes, and allergic reactions. Causes cancer in animals. Death at very high concentration.1. Use products with lower emission rates of formaldehyde
   2. Keep humidity low in house
   3. Increase ventilation
   4. Aging or baking of products
Other volatile organic compoundsPaints, solvents, wood preservatives, aerosol sprays, cleaners and disinfectants, moth repellents, air fresheners, hobby supplies, and dry cleaned clothesEye, nose, and throat irritation, headaches, loss of coordination; nausea, damage to kidney and central nervous system. Some cause cancer in animals. Some may cause cancer in humans.1. Buy only what you need
   2. Read labels and follow instructions
   3. Use in well-ventilated areas or outdoors
   4. Hang dry cleaned clothes in an open area for about 6 hours.
RadonLocal geology, soil, waterLung cancer, possibility of stomach cancer1. Seal cracks and openings in the basement
   2. Ventilate crawl space
   3. Subslab suction
   4. Increase ventilation
PesticidesGarden and lawn chemicals, poisons for pest controlEye, nose, and throat irritation, damage to central nervous system and kidney, cancer1. Use nonchemicals if possible
   2. Avoid storage in the house
   3. Follow manufacturer's instructions
   4. Increase ventilation
AsbestosDeteriorating or damaged insulation, fireproofing, or acoustical materialsCancer and lung diseases (smokers at higher risk)1. Test the suspected material
   2. Remove asbestos by a trained contractor or develop a maintenance plan
   3. Encapsulation of material containing asbestos
Heavy metalsPaints, automobiles, tobacco smoke, soil, and dustHeadaches, irritation in mouth, rash, excessive perspiration, kidney damage1. Vacuum regularly
   2. Removal of lead based paint
BioaerosolsHumans, pets, moist surfaces, humidifiers, ventilation systems, drip pans, cooling coils in air handling units, plants, outside airLegionnaires' disease, humidifier fever, influenza1. Remove the source
   2. Maintenance of equipment
   3. Humidity control to 40% to 60%
   4. Use of filters in ventilation
   5. Air cleaning by the use of disinfectants



Sources of Indoor Pollution

There are various sources of indoor air pollutants in any building. A partial list of common sources is given in the table. Several types of combustion sources release inorganic gaseous pollutants, formaldehyde, suspended particulates that can be breathed, and other toxic chemicals. Tobacco products also release a mixture of over 4,000 compounds.

HEALTH SYMPTOMS ASSOCIATED WITH DIFFERENT ENVIRONMENTAL CONDITIONS
Environmental Condition(s)Symptoms
Ergonomic Conditions Headache
Noise and Vibration Fatigue
  Poor Concentration
  Dizziness
  Tiredness
  Headache with nausea
  Ringing in ears
  Pounding heart
Relative Humidity Dry throat
  Shortness of breath or bronchial asthma
  Irritation and infection of respiratory tract
Relative Humidity Nasal problems (stuffiness, irritation)
High Temperatures 
Warm Air Skin problems (dryness, irritation, rashes)
Low Relative Humidity 
Excessive Air Movement 
Artificial Light Eye problems (burning, dry gritty eye)



The pollutants released from building materials include formaldehyde, asbestos, and to a lesser extent radon. Formaldehyde is used in a variety of products, ranging from lipstick and shampoo to kitchen cabinets and carpeting, because it is an excellent preservative and bonding agent. Pressed wood products and furniture made with these products are found in offices and homes throughout the world. Urea-formaldehyde foam insulation is one of the major sources of formaldehyde. Asbestos, a known human carcinogen , is a mineral fiber that was widely used in a variety of building materials and as an insulating material and fire retardant in the United States until its use was banned in the early 1970s.

Indoor radon problems generally result from the entry of radon gas released as a result of the radioactive decay of uranium found in soil around the house and in the geological formation under the foundation. Building materials such as granite, clay, bricks, rocks, sandstone, and concrete containing alum shale may also be major sources of radon, depending on their uranium content.

The pollutants released due to overcrowding of humans or animals include bioaerosols . Most of the bioaerosols present in the outdoors are induced indoors either by natural or mechanical intake of the ventilation systems. Humidifiers, air conditioning systems, cooling towers, mechanical ventilation systems, air-distribution ducts, and areas of water damage are the best breeding places for these bioaerosols. Pets are sources of saliva and dander.

Heavy metals such as lead, mercury, cadmium, and chromium have been found indoors. Their levels depend on the concentrations in outdoor air and the surrounding soil and dust. The residential use of lead paint was banned in the United States in 1978, decades after being outlawed in much of Europe because of the danger it posed to children. Residual lead paint is still present in many older buildings.



Household products and personal care items are a constant source of indoor air pollution. Hobbies such as welding and soldering can easily add more pollutants to indoor environments. Office machines and domestic air cleaners are a major source of ozone.


Causes of Indoor Air Pollution

There are a variety of causes of poor indoor air quality. A NISOH study based on over five hundred complaints found that inadequate ventilation and the release of contaminants from indoor and outdoor sources are the primary reasons for indoor air quality problems (see pie chart). Inadequate ventilation may be defined as insufficient air to remove pollutants that are degrading the quality of air. Thus, the air quality in a building is the result of a contest between the pollutants and the ventilation system. Other factors that can aggravate this situation are temperature, humidity, and microbial contamination.

The early shutdown and late startup of a ventilation system and insufficient fresh outdoor air entering a ventilation system are often the direct result of overzealous energy-saving procedures. The problems of poor air distribution by a ventilation system within a building, limited air mixing in occupied areas, and clogged filters can contribute to poor air quality.

Since the early 1970s buildings have been built to be more airtight to conserve energy. This has resulted from using improved construction techniques and caulking and sealing. Unfortunately, this practice limits the amount of polluted air that escapes, which can cause pollutants to build up to unhealthy levels inside a building.

Temperature and humidity extremes can affect the emission rates of some pollutants as well as the perceptions of building occupants. High humidity and high temperature cause people to feel lethargic and want more air movement. Low humidity induces coughing, dry throats, and dry eyes. An additional problem with low humidity is that it accentuates sense of smell. Noise from mechanical systems or glare from lights can cause headaches and fatigue. These are all symptoms of sick building syndrome and are thus usually blamed on poor air quality.


Health Effects of Indoor Air Pollutants

Health effects due to indoor air pollutants may be short- as well as long-term. Short-term problems include a stuffy, odorous environment and symptoms such as burning eyes, skin irritation, and headaches. Long-term health problems have a longer latency period or are chronic in nature. The magnitude and duration of detrimental health effects are influenced by the time of exposure, concentration, presence of a preexisting unhealthy condition, and age.

Health conditions involving some allergic reactions, including hypersensitivity pneumonitis, allergic rhinitis, and some types of asthma, are triggered by bioaerosols. Symptoms related to bioaerosols include sneezing, coughing, shortness of breath, fever, and dizziness. Infections such as influenza, measles, and chicken pox are also transmitted through the air. Overall, poor air quality may be responsible for a decrease in work performance, general feeling of poor health, reduced ability to concentrate, or illness.


Control of Indoor Air Pollution

Basic approaches to control indoor air pollution include source control, source isolation, increased ventilation, dehumidification, and the use of filters (see the table). Possible sources of contamination are eliminated in a source-control strategy. Examples include banning smoking in public buildings, using carefully selected building materials to avoid the emission of toxic or irritating substances, and limiting the use of fibrous materials. Source-isolation strategy is used in situations where a source cannot be completely eliminated. For instance, copy machine areas, food service stations, and bathrooms are often separately vented outside buildings to avoid the recirculation of return air. Existing sources of pollution such as leaded paint and asbestos insulation may either be removed or encapsulated. Increased ventilation and filtration are traditional approaches to ensuring good indoor air quality. Dehumidification helps in the reduction of microbial growth. Low humidity should be maintained inside a house to limit the growth of such bacteria.

Devices based on the principles of absorption and adsorption are finding applications in controlling indoor air pollutants and moisture. Solid and liquid desiccants have been found effective in removing moisture and a wide range of pollutants. Silica gel, activated alumina, and activated carbon are also used to adsorb gases and vapors. Spider plants have been found to absorb some volatile organic compounds (VOCs) from indoor air.

The number of lawsuits filed in the area of indoor air pollution dramatically increased between 1970 and 2001. The U.S. Environmental Protection Agency's Building Assessment Survey Evaluation found that in the worst buildings of the first study group, approximately 30 to 40 percent of occupants experienced headaches, unusual fatigue or drowsiness, and dry, itching, or otherwise irritated eyes at least once a week. In the best buildings of the same study group, 6 percent of occupants experienced unusual fatigue or drowsiness. Under these circumstances, the possibility of complaints filed in relationship to indoor air quality will not become remote in coming years.

see also Asbestos; Asthma; Household Pollutants; Lead; Mold Pollution; Pesticides; Radon; Tobacco Smoke.

Bibliography

Hays, Steve M.; Gobbell, Ronald V.; and Ganick, Nicholas R. (1995). Indoor Air Quality: Solutions and Strategies. New York: McGraw-Hill.

Turiel, Isaac. (1985). Indoor Air Quality and Human Health. Stanford, CA: Stanford University Press.


Internet Resources

American Lung Association Web site. Available from http://www.healthhouse.org/iaq.

Occupational Safety and Health Administration (OSHA) Web site. Available from http://www.osha-slc.gov/SLTC.

U.S. Environmental Protection Agency Web site. Available from www.epa.gov/iaq.

Ashok Kumar and Rishi Kumar

Legionnaires' disease is a relatively rare type of pneumonia that is caused by Legionella pneumophila, a bacterium found primarily in warm-water environments. It was first identified when thirty-four people attending a 1976 American Legion convention in Philadelphia contracted the disease and died. The exact source of the outbreak is not known with certainty, but it is believed the bacterium was growing in an air conditioning tower on the roof of the old but well-maintained hotel where the conference was held. The disease is contracted by inhaling airborne water droplets containing Legionellae. It infects 10,000 to 15,000 persons annually in the United States and has a mortality rate of 20 to 50 percent.

SICK BUILDING SYNDROME

Symptoms associated with building-related health problems are commonly referred to as sick building syndrome. The American Society of Heating, Refrigerating and Air-Conditioning Engineers describes a building in which more than 20 percent of its occupants report building-related illness as a sick building. Symptoms include, but are not limited to, irritation of eyes, nose, and throat; dryness of mucous membranes and skin; erythema; mental fatigue; headaches; airway infections; coughing; hoarseness; wheezing; nausea; dizziness; and unspecific hypersensitivity. It is difficult to identify specific causes of the problem. The complaints reported by the occupants of "sick buildings" are generally nonspecific in nature and, therefore, it is very hard to establish a causal relationship between symptoms and pollutants present in the building.

More From encyclopedia.com