Industrial Minerals

views updated May 29 2018

Industrial Minerals

Asbestos

Barite

Boron compounds

Corundum

Feldspar

Fluorspar

Phosphates

Potassium salts

Sodium chloride

Sulfur

Resources

Industrial minerals are naturally occurring non-metallic Earth materials that are used in a variety of industrial operations. Some of the materials commonly included in this category include asbestos, bar-ite, boron compounds, clays, corundum, feldspar, fluorspar, phosphates, potassium salts, sodium chloride, and sulfur. Some of the materials considered as industrial minerals include construction materials such as sand, gravel, limestone, dolomite, and crushed rock; abrasives and refractories; gemstones; and lightweight aggregates. Strictly speaking, materials such as limestone, crushed rock, gravel, and sand are rocks and sediments, not minerals.

Asbestos

Asbestos is a generic term used to described a large group of minerals with complex chemical composition that includes magnesium, silicon, oxygen, hydrogen, and other elements. The minerals collectively known as asbestos are often sub-divided into two smaller groups, the serpentines and amphiboles. All forms of asbestos are best known for an important common propertytheir resistance to heat and flame. That property is responsible for the name asbestos (Greek), meaning unquenchable. Asbestos has been used for thousands of years in the production of heat resistant materials such as lamp wicks.

In recent years, asbestos has been used as a reinforcing material in cement, in vinyl floor tiles, in fire-fighting garments and fire-proofing materials, in the manufacture of brake linings and clutch facings, for electrical and heat insulation, and in pressure pipes and ducts.

Prolonged exposure to asbestos fibers can block the respiratory system and cause development of asbestosis or lung cancer. The latency period for these disorders is at least 20 years, so men and women who mined the mineral or used it in construction during the 1940s and 1950s were not aware of their risk for these diseases until late in their lives. Today, uses of the mineral in which humans are likely to be exposed to its fibers have largely been discontinued. Demolition or remodeling of old buildings containing asbestos requires special measures to ensure that the asbestos is not released into the environment.

Barite

Barite is a naturally occurring form of barium sulfate, commonly found in Canada, Mexico, and the states of Arkansas, Georgia, Missouri, and Nevada. One of the most important uses of barite is in the production of heavy muds that are used in drilling oil and gas wells. The mud is circulated to lift rock cuttings to the surface and its weight can be adjusted to balance the pressure of the oil, gas, or water in the rock and prevent blowouts. Barite is also used in the manufacture of a number of other commercially important industrial products such as paper coatings, battery plates, paints, linoleum and oilcloth, plastics, lithographic inks, and as a filler in some kinds of textiles. Barium compounds are also widely used in medicine to provide the opacity that is needed in taking certain kinds of x rays.

Boron compounds

Boron is a non-metallic element obtained most commonly from naturally occurring minerals known as borates. The borates contain oxygen, hydrogen, sodium, and other elements in addition to boron. Probably the most familiar boron-containing mineral is borax, mined extensively in salt lakes and alkaline soils.

Borax was known in the ancient world and used to make glazes and hard glass. Today, it is still an important ingredient of glassy products that include heat-resistant glass (Pyrex), glass wool and glass fiber, enamels, and other kinds of ceramic materials. Elementary boron also has a number of other uses. For example, it is used in nuclear reactors to absorb excess neutrons, in the manufacture of special-purpose alloys, in the production of semiconductors, and as a component or rocket propellants.

Corundum

Corundum is a naturally occurring form of aluminum oxide that is found abundantly in Greece and Turkey and in New York. It is a very hard mineral with a high melting point. It is relatively inert chemically and does not conduct an electrical current very well.

These properties make corundum highly desirable as a refractory (a substance capable of withstanding very high temperatures) and as an abrasive (a material used for cutting, grinding, and polishing other materials). One of the more mundane uses of corundum is in the preparation of toothpaste, where its abrasive properties help in keeping teeth clean and white.

In its granular form, corundum is known as emery. Many consumers are familiar with emery boards used for filing fingernails. Emery, like corundum, is also used in the manufacture of cutting, grinding, and polishing wheels.

Feldspar

The feldspars are a class of minerals known as the aluminum silicates. That is, they all contain aluminum, silicon, and oxygen, as sodium, potassium, and calcium. In many cases, the name feldspar is reserved for the potassium aluminum silicates. The most important commercial use of feldspar is in the manufacture of pottery, enamel, glass, and ceramic materials. The hardness of the mineral also makes it desirable as an abrasive.

Fluorspar

Fluorspar is a form of calcium fluoride that occurs naturally in many parts of the world including North America, Mexico, and Europe. The compound gets its name from one of its oldest uses, as a flux. In Latin, the word fluor means flux. A flux is a material that is used in industry to assist in the mixing of other materials or to prevent the formation of oxides during the refining of a metal. For example, fluorspar is often added to an open-hearth steel furnace to react with any oxides that might form during that process. The mineral is also used during the smelting of an ore (the removal of a metal form its naturally occurring ore).

Fluorspar is also the principal source of fluorine gas. The mineral is first converted to hydrogen fluoride that, in turn, is converted to the element fluorine. Some other uses of fluorspar are in the manufacture of paints and certain types of cement, in the production of emery wheels and carbon electrodes, and as a raw material for phosphors (a substance that glows when bombarded with energy, such as the materials used in color television screens).

Phosphates

The term phosphate refers to any chemical compound containing a characteristic grouping of atoms, given by the formula PO4, or comparable groupings. In the field of industrial minerals, the term most commonly refers to a specific naturally occurring phosphate, calcium phosphate, or phosphate rock.

By far the most important use of phosphate rock is in agriculture, where it is treated to produce fertilizers and animal feeds. Typically, about 80% of all the phosphate rock used in the United States goes to one of these agricultural applications.

Phosphate rock is also an important source for the production of other phosphate compounds, such as sodium, potassium, and ammonium phosphate. Each of these compounds, in turn, has a very large variety of uses in everyday life. For example, one form of sodium phosphate is a common ingredient in dishwashing detergents. Another, ammonium phosphate, is used to treat cloth to make it fire retardant. Potassium phosphate is used in the preparation of baking powder.

Potassium salts

As with other industrial minerals mentioned here, the term potassium salts applies to a large group of compounds, rather than one single compound. Potassium chloride, sulfate, and nitrate are only three of the most common potassium salts used in industry. The first of these, known as sylvite, can be obtained from salt water or from fossil salt beds. It makes up roughly 1% of each deposit, the remainder of the deposit being sodium chloride (halite).

KEY TERMS

Abrasive A finely divided, hard material that is used to cut, grind, polish, smooth, or clean the surface of some other material.

Flux A substance that promotes the joining of two minerals or metals with each other or that prevents the formation of oxides in some kind of industrial process.

Refractory Any substance with a very high melting point that is able to withstand very high temperatures.

Potassium salts are similar to phosphate rocks in that their primary use is in agriculture, where they are made into fertilizers, and in the chemical industry, where they are converted into other compounds of potassium. Some compounds of potassium have particularly interesting uses. Potassium nitrate, for example, is unstable and is used in the manufacture of explosives, fireworks, and matches.

Sodium chloride

Like potassium chloride, sodium chloride (halite) is found both in sea water and in underground salt deposits left as the result of the evaporation of ancient seas. Sodium chloride has been known to and used by humans for thousands of years and is best known by its common name of salt, or table salt. By far its most important use is in the manufacture of other industrial chemicals, including sodium hydroxide, hydrochloric acid, chlorine, and metallic sodium. In addition, sodium chloride has many industrial and commercial uses. Among these are in the preservation of foods (by salting, pickling, corning, curing, or some other method), highway de-icing, as an additive for human and other animal foods, in the manufacture of glazes for ceramics, in water softening, and in the manufacture of rubber, metals, textiles, and other commercial products.

Sulfur

Sulfur occurs in its elementary form in large underground deposits from which it is obtained by traditional mining processes or, more commonly, by the Frasch process. In the Frasch process, superheated water is forced down a pipe that has been sunk into a sulfur deposit. The heated water melts the sulfur, which is then forced up a second pipe to Earths surface.

The vast majority of sulfur is used to manufacture a single compound, sulfuric acid. Sulfuric acid consistently ranks number one in the United States as the chemical produced in largest quantity. Sulfuric acid has a very large number of uses, including the manufacture of fertilizers, the refining of petroleum, the pickling of steel (the removal of oxides from the metals surface), and the preparation of detergents, explosives, and synthetic fibers.

A significant amount of sulfur is also used to produce sulfur dioxide gas (actually an intermediary in the manufacture of sulfuric acid). Sulfur dioxide, in turn, is extensively used in the pulp and paper industry, as a refrigerant, and in the purification of sugar and the bleaching of paper and other products.

Some sulfur is refined after being mined and then used in its elemental form. This sulfur finds application in the vulcanization of rubber, as an insecticide or fungicide, and in the preparation of various chemicals and pharmaceuticals.

Resources

BOOKS

Kogel, J.E., N.C. Trivdedi, J.M. Barker, and S.T.

Krukowski, eds. Industrial Minerals & Rocks: Commodities, Markets, and Uses. Littleton, CO: Society for Mining, Metallurgy, and Exploration, 2006.

Tarbuck, E.J., F.K. Lutgens, and D. Tasa. Earth : An Introduction to Physical Geology. Upper Saddle River, NJ: Prentice Hall, 2004.

David E. Newton

Industrial Minerals

views updated May 18 2018

Industrial minerals

The term industrial minerals is used to describe naturally occurring nonmetallic minerals that are used extensively in a variety of industrial operations. Some of the minerals commonly included in this category include asbestos, barite, boron compounds, clays, corundum, feldspar, fluorspar, phosphates, potassium salts, sodium chloride, and sulfur.

Asbestos

Asbestos is a general term used for a large group of minerals with similar and complex chemical compositions. These minerals generally contain magnesium, silicon, oxygen, hydrogen, and other elements. The minerals collectively known as asbestos are often subdivided into two smaller groups, the serpentines and amphiboles. All forms of asbestos are best known for an important common property: their resistance to heat and flame. That property is responsible, in fact, for the name asbestos, from the Greek, meaning "unquenchable." Asbestos has been used for thousands of years in the production of heat resistant materials such as lamp wicks.

Today, asbestos is used as a reinforcing material in cement, in vinyl floor tiles, in firefighting garments and fireproofing materials, in the manufacture of brake linings and clutch facings, for electrical and heat insulation, and in pressure pipes and ducts.

Prolonged exposure to asbestos fibers can lead to serious respiratory problems, such as asbestosis and/or lung cancer. These diseases usually take many (often 20 or more) years to develop. Thus, men and women who mined the mineral or used it for various construction purposes during the 1940s and 1950s were not aware of the risks to their health until late in their lives. Today, the uses of asbestos in which humans are likely to be exposed to its fibers have largely been discontinued.

Words to Know

Abrasive: A finely divided hard material that is used to cut, grind, polish, smooth, or clean the surface of some other material.

Flux: A substance that promotes the joining of two minerals or metals with each other or that prevents the formation of oxides in some kind of industrial process.

Oxide: An inorganic compound whose only negative part is the element oxygen.

Refractory: Any substance with a very high melting point that is able to withstand very high temperatures.

Barite

Barite is the name given to a naturally occurring form of barium sulfate (BaSO4). It is commonly found in Canada, Mexico, and the states of Arkansas, Georgia, Missouri, and Nevada. One of the most important uses of barite is in the production of heavy muds that are used in drilling oil and gas wells. It is also used in the manufacture of a number of other commercially important industrial products such as paper coatings, battery plates, paints, linoleum and oilcloth, plastics, lithographic inks, and as a filler in some kinds of textiles. In addition, barium compounds are widely used in medicine to provide the opacity (darkness) that is needed in taking certain kinds of X rays.

Boron compounds

Boron is a nonmetallic element obtained most commonly from naturally occurring minerals known as borates. The borates contain oxygen, hydrogen, sodium, and other elements in addition to boron. Probably the most familiar boron-containing mineral is borax, mined extensively in salt lakes and alkaline soils.

Borax was known in the ancient world and used to make glazes and hard glass. Today, it is still an important ingredient of glassy products, including heat-resistant glass (Pyrex), glass wool and glass fiber, enamels, and other kinds of ceramic materials. The element boron itself also has a number of interesting uses. For example, it is used in nuclear reactors to absorb excess neutrons, in the manufacture of special-purpose alloys (metal mixtures), in the production of semiconductors, and as a component of rocket propellants.

Corundum

Corundum is a naturally occurring form of aluminum oxide that is found abundantly in Greece and Turkey and in New York State. It is a very hard mineral with a high melting point. In addition, it is relatively inert chemically and does not conduct an electrical current very well.

These properties make corundum highly desirable as a refractory (a substance capable of withstanding very high temperatures) and as an abrasive (a material used for cutting, grinding, and polishing other materials). One of the more common uses of corundum is in the preparation of toothpastes. Its abrasive properties help to keep teeth clean and white.

In its granular form, corundum is known as emery. Many consumers are familiar with emery boards used for filing fingernails. Like corundum, emery is also used in the manufacture of cutting, grinding, and polishing wheels.

Feldspar

The feldspars are a class of minerals known as the aluminum silicates. They all contain aluminum, silicon, and oxygen, as well as other elements, most commonly sodium, potassium, and calcium. In many cases, the name feldspar is reserved for the potassium aluminum silicates. The most important commercial use of feldspar is in the manufacture of pottery, enamel, glass, and ceramic materials. The hardness of the mineral also makes it desirable as an abrasive.

Fluorspar

Fluorspar is a form of calcium fluoride that occurs naturally in many parts of the world, including North America, Mexico, and Europe. The compound gets its name from one of its oldest uses, as a flux. (In Latin, the word fluor means "flux.") A flux is a material used in industry to aid in the mixing of other materials or to prevent the formation of oxides during the refining of a metal. For example, fluorspar is often added to an open hearth steel furnace to react with any oxides that might form during that process. The mineral is also used during the smelting of an ore (the removal of a metal from its naturally occurring ore).

Fluorspar is also the principal source of fluorine gas. The mineral is first converted to hydrogen fluoride, which, in turn, is then converted to the element fluorine. Some other uses of fluorspar are in the manufacture of paints and certain types of cement, in the production of emery wheels and carbon electrodes, and as a raw material for phosphors (substances that glow when bombarded with energy, such as the materials used in color television screens).

Phosphates

To a chemist, the term phosphate refers to any chemical compound containing a characteristic grouping of atoms. This grouping contains phosphorus and oxygen atoms (present in the formula PO4, or in comparable groupings). In the field of industrial minerals, the term most commonly refers to a specific naturally occurring phosphate, calcium phosphate, or phosphate rock.

By far the most important use of phosphate rock is in agriculture, where it is treated to produce fertilizers and animal feeds. Typically, about 80 percent of all the phosphate rock used in the United States goes to one of these agricultural applications.

Phosphate rock is also an important source for the production of other phosphate compounds, such as sodium, potassium, and ammonium phosphate. Each of these compounds, in turn, has a wide array of uses in everyday life. For example, one form of sodium phosphate is a common ingredient in dishwashing detergents. Another, ammonium phosphate, is used to treat cloth to make it fire retardant. And potassium phosphate is used in the preparation of baking powder.

Potassium salts

As with other industrial minerals mentioned here, the term potassium salts applies to a large group of compounds rather than one single compound. Potassium chloride, potassium sulfate, and potassium nitrate are only three of the most common potassium salts used in industry. The first of these, also known as sylvite, can be obtained from salt water or from fossil salt beds. It makes up roughly 1 percent of each deposit, the remainder of the deposit being sodium chloride (halite).

Potassium salts are similar to phosphate rocks in that their primary use is in agriculture, where they are made into fertilizers, and in the chemical industry, where they are converted into other compounds of potassium. Some compounds of potassium have particularly interesting uses. Potassium nitrate, for example, is unstable and is used in the manufacture of explosives, fireworks, and matches.

Sodium chloride

Like potassium chloride, sodium chloride (halite) is found both in sea water and in underground salt mines, where it is left as the result of the evaporation of ancient seas. Sodium chloride has been known to and used by humans for thousands of years. It is best known by its common name of salt, or table salt. By far its most important use is in the manufacture of other industrial chemicals, including sodium hydroxide, hydrochloric acid, chlorine, and metallic sodium. In addition, sodium chloride has many industrial and commercial uses. Among these are the preservation of foods (by salting, pickling, corning, curing, or some other method), road deicing, as an additive for human and other animal foods, in the manufacture of glazes for ceramics, in water softening, and in the manufacture of rubber, metals, textiles, and other commercial products.

Sulfur

Sulfur occurs in its elemental form in large underground deposits from which it is obtained by traditional mining processes or, more commonly, by the Frasch process. In the Frasch process, superheated water is forced down a pipe that has been sunk into a sulfur deposit. The heated water melts the sulfur, which is then forced up a second pipe to Earth's surface.

The vast majority of sulfur is used to manufacture a single compound, sulfuric acid. Sulfuric acid consistently ranks number one in the United States as the chemical produced in largest quantity. It has a very large number of uses, including the manufacture of fertilizers, the refining of petroleum, the pickling of steel (the removal of oxides from the metal's surface), and the preparation of detergents, explosives, and synthetic fibers.

A significant amount of sulfur is also used to produce sulfur dioxide gas (actually an intermediary in the manufacture of sulfuric acid). Sulfur dioxide, in turn, is used extensively in the pulp and paper industry, as a refrigerant, and in the purification of sugar and the bleaching of paper and other products.

Some sulfur is refined after being mined and then used in its elemental form. This sulfur finds application in the vulcanization of rubber, as an insecticide or fungicide, and in the preparation of various chemicals and pharmaceuticals. (Vulcanization is a chemical treatment process that gives rubber its elasticity and strength.)

[See also Potassium; Sodium chloride; Sulfur ]

Industrial Minerals

views updated May 29 2018

Industrial minerals

Industrial minerals is a term used to describe naturally occurring non-metallic minerals that are used extensively in a variety of industrial operations. Some of the minerals commonly included in this category include asbestos , barite, boron compounds, clays, corundum, feldspar, fluorspar, phosphates, potassium salts, sodium chloride , and sulfur . Some of the mineral mixtures often considered as industrial minerals include construction materials such as sand , gravel, limestone, dolomite, and crushed rock; abrasives and refractories; gemstones; and lightweight aggregates.


Asbestos

Asbestos is a generic term used for a large group of minerals with complex chemical composition that includes magnesium , silicon, oxygen , hydrogen , and other elements. The minerals collectively known as asbestos are often sub-divided into two smaller groups, the serpentines and amphiboles. All forms of asbestos are best known for an important common property—their resistance to heat and flame. That property is responsible, in fact, for the name asbestos (Greek), meaning "unquenchable." Asbestos has been used for thousands of years in the production of heat resistant materials such as lamp wicks.

Today, asbestos is used as a reinforcing material in cement, in vinyl floor tiles, in fire-fighting garments and fire-proofing materials, in the manufacture of brake linings and clutch facings, for electrical and heat insulation, and in pressure pipes and ducts.

Prolonged exposure to asbestos fibers can block the respiratory system and lead to the development of asbestosis and/or lung cancer . The latency period for these disorders is at least 20 years, so men and women who mined the mineral or used it for various construction purposes during the 1940s and 1950s were not aware of their risk for these diseases until late in their lives. Today, uses of the mineral in which humans are likely to be exposed to its fibers have largely been discontinued.


Barite

Barite is the name given to a naturally occurring form of barium sulfate , commonly found in Canada, Mexico, and the states of Arkansas, Georgia, Missouri, and Nevada. One of the most important uses of barite is in the production of heavy muds that are used in drilling oil and gas wells. It is also used in the manufacture of a number of other commercially important industrial products such as paper coatings, battery plates, paints, linoleum and oilcloth, plastics , lithographic inks, and as a filler in some kinds of textiles . Barium compounds are also widely used in medicine to provide the opacity that is needed in taking certain kinds of x rays .


Boron compounds

Boron is a non-metallic element obtained most commonly from naturally occurring minerals known as borates. The borates contain oxygen, hydrogen, sodium , and other elements in addition to boron. Probably the most familiar boron-containing mineral is borax, mined extensively in salt lakes and alkaline soils.

Borax was known in the ancient world and used to make glazes and hard glass . Today, it is still an important ingredient of glassy products that include heat-resistant glass (Pyrex), glass wool and glass fiber, enamels, and other kinds of ceramic materials. Elementary boron also has a number of interesting uses. For example, it is used in nuclear reactors to absorb excess neutrons, in the manufacture of special-purpose alloys, in the production of semiconductors, and as a component or rocket propellants.


Corundum

Corundum is a naturally occurring form of aluminum oxide that is found abundantly in Greece and Turkey and in New York State. It is a very hard mineral with a high melting point. It is relatively inert chemically and does not conduct an electrical current very well.

These properties make corundum highly desirable as a refractory (a substance capable of withstanding very high temperatures) and as an abrasive (a material used for cutting, grinding, and polishing other materials). One of the more mundane uses of corundum is in the preparation of toothpaste, where its abrasive properties help in keeping teeth clean and white.

In its granular form, corundum is known as emery. Many consumers are familiar with emery boards used for filing finger nails. Emery, like corundum, is also used in the manufacture of cutting, grinding, and polishing wheels.


Feldspar

The feldspars are a class of minerals known as the aluminum silicates. That is, they all contain aluminum, silicon, and oxygen, as sodium, potassium, and calcium . In many cases, the name feldspar is reserved for the potassium aluminum silicates. The most important commercial use of feldspar is in the manufacture of pottery, enamel, glass, and ceramic materials. The hardness of the mineral also makes it desirable as an abrasive.


Fluorspar

Fluorspar is a form of calcium fluoride that occurs naturally in many parts of the world including North America , Mexico, and Europe . The compound gets its name from one of its oldest uses, as a flux. In Latin, the word fluor means "flux." A flux is a material that is used in industry to assist in the mixing of other materials or to prevent the formation of oxides during the refining of a metal . For example, fluorspar is often added to an open hearth steel furnace to react with any oxides that might form during that process. The mineral is also used during the smelting of an ore (the removal of a metal form its naturally occurring ore).

Fluorspar is also the principal source of fluorine gas. The mineral is first converted to hydrogen fluoride which, in turn, is then converted to the element fluorine. Some other uses of fluorspar are in the manufacture of paints and certain types of cement, in the production of emery wheels and carbon electrodes, and as a raw material for phosphors (a substance that glows when bombarded with energy , such as the materials used in color television screens).


Phosphates

The term phosphate refers to any chemical compound containing a characteristic grouping of atoms , given by the formula PO4, or comparable groupings. In the field of industrial minerals, the term most commonly refers to a specific naturally occurring phosphate, calcium phosphate, or phosphate rock.

By far the most important use of phosphate rock is in agriculture, where it is treated to produce fertilizers and animal feeds. Typically, about 80% of all the phosphate rock used in the United States goes to one of these agricultural applications.

Phosphate rock is also an important source for the production of other phosphate compounds, such as sodium, potassium, and ammonium phosphate. Each of these compounds, in turn, has a very large variety of uses in everyday life. For example, one form of sodium phosphate is a common ingredient in dishwashing detergents. Another, ammonium phosphate, is used to treat cloth to make it fire retardant. Potassium phosphate is used in the preparation of baking powder.


Potassium salts

As with other industrial minerals mentioned here, the term potassium salts applies to a large group of compounds, rather than one single compound. Potassium chloride, sulfate, and nitrate are only three of the most common potassium salts used in industry. The first of these, known as sylvite, can be obtained from salt water or from fossil salt beds. It makes up roughly 1% of each deposit, the remainder of the deposit being sodium chloride (halite).

Potassium salts are similar to phosphate rocks in that their primary use is in agriculture, where they are made into fertilizers, and in the chemical industry, where they are converted into other compounds of potassium. Some compounds of potassium have particularly interesting uses. Potassium nitrate , for example, is unstable and is used in the manufacture of explosives , fireworks, and matches.


Sodium chloride

Like potassium chloride, sodium chloride (halite) is found both in sea water and in underground salt mines left as the result of the evaporation of ancient seas. Sodium chloride has been known to and used by humans for thousands of years and is best known by its common name of salt, or table salt. By far its most important use is in the manufacture of other industrial chemicals, including sodium hydroxide , hydrochloric acid, chlorine , and metallic sodium. In addition, sodium chloride has many industrial and commercial uses. Among these are in the preservation of foods (by salting, pickling, corning, curing, or some other method), highway de-icing, as an additive for human and other animal foods, in the manufacture of glazes for ceramics , in water softening, and in the manufacture of rubber, metals, textiles, and other commercial products.


Sulfur

Sulfur occurs in its elementary form in large underground deposits from which it is obtained by traditional mining processes or, more commonly, by the Frasch process. In the Frasch process, superheated water is forced down a pipe that has been sunk into a sulfur deposit. The heated water melts the sulfur, which is then forced up a second pipe to the earth's surface.

The vast majority of sulfur is used to manufacture a single compound, sulfuric acid . Sulfuric acid consistently ranks number one in the United States as the chemical produced in largest quantity. Sulfuric acid has a very large number of uses, including the manufacture of fertilizers, the refining of petroleum , the pickling of steel (the removal of oxides from the metal's surface), and the preparation of detergents, explosives, and synthetic fibers.

A significant amount of sulfur is also used to produce sulfur dioxide gas (actually an intermediary in the manufacture of sulfuric acid). Sulfur dioxide, in turn, is extensively used in the pulp and paper industry, as a refrigerant, and in the purification of sugar and the bleaching of paper and other products.

Some sulfur is refined after being mined and then used in its elemental form. This sulfur finds application in the vulcanization of rubber, as an insecticide or fungicide , and in the preparation of various chemicals and pharmaceuticals.


Resources

books

Greenwood, N.N., and A. Earnshaw. Chemistry of the Elements. 2nd ed. Oxford: Butterworth-Heinneman Press, 1997.

Klein, C. The Manual of Mineral Science. 22nd ed. New York: John Wiley & Sons, Inc., 2002.


David E. Newton

KEY TERMS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Abrasive

—A finely divided, hard material that is used to cut, grind, polish, smooth, or clean the surface of some other material.

Flux

—A substance that promotes the joining of two minerals or metals with each other or that prevents the formation of oxides in some kind of industrial process.

Refractory

—Any substance with a very high melting point that is able to withstand very high temperatures.

Industrial Minerals

views updated May 21 2018

Industrial minerals

Industrial minerals is a term used to describe naturally occurring non-metallic minerals that are used extensively in a variety of industrial operations. Some of the minerals commonly included in this category include asbestos, barite, boron compounds, clays, corundum, feldspar , fluorspar, phosphates, potassium salts, sodium chloride, and sulfur. Some of the mineral mixtures often considered as industrial minerals include construction materials such as sand , gravel, limestone , dolomite , and crushed rock ; abrasives and refractories; gemstones ; and lightweight aggregates.

Asbestos is a generic term used for a large group of minerals with complex chemical composition that includes magnesium, silicon , oxygen , hydrogen, and other elements. The minerals collectively known as asbestos are often sub-divided into two smaller groups, the serpentines and amphiboles. All forms of asbestos are best known for an important common propertytheir resistance to heat and flame. That property is responsible, in fact, for the name asbestos (Greek), meaning unquenchable. Asbestos has been used for thousands of years in the production of heat resistant materials such as lamp wicks.

Today, asbestos is used as a reinforcing material in cement, in vinyl floor tiles, in fire-fighting garments and fireproofing materials, in the manufacture of brake linings and clutch facings, for electrical and heat insulation, and in pressure pipes and ducts.

Prolonged exposure to asbestos fibers can block the respiratory system and lead to the development of asbestosis and/or lung cancer. The latency period for these disorders is at least 20 years, so men and women who mined the mineral or used it for various construction purposes during the 1940s and 1950s were not aware of their risk for these diseases until late in their lives. Today, uses of the mineral in which humans are likely to be exposed to its fibers have largely been discontinued.

Barite is the name given to a naturally occurring form of barium sulfate, commonly found in Canada, Mexico, and the states of Arkansas, Georgia, Missouri, and Nevada. One of the most important uses of barite is in the production of heavy muds that are used in drilling oil and gas wells. It is also used in the manufacture of a number of other commercially important industrial products such as paper coatings, battery plates, paints, linoleum and oilcloth, plastics, lithographic inks, and as filler in some kinds of textiles. Barium compounds are also widely used in medicine to provide the opacity that is needed in taking certain kinds of x rays.

Boron is a non-metallic element obtained most commonly from naturally occurring minerals known as borates. The borates contain oxygen, hydrogen, sodium, and other elements in addition to boron. Probably the most familiar boron-containing mineral is borax, mined extensively in salt lakes and alkaline soils.

Borax was known in the ancient world and used to make glazes and hard glass . Today, it is still an important ingredient of glassy products that include heat-resistant glass (Pyrex), glass wool and glass fiber, enamels, and other kinds of ceramic materials. Elementary boron also has a number of interesting uses. For example, it is used in nuclear reactors to absorb excess neutrons, in the manufacture of special-purpose alloys, in the production of semiconductors, and as a component or rocket propellants.

Corundum is a naturally occurring form of aluminum oxide that is found abundantly in Greece and Turkey and in New York State. It is a very hard mineral with a high melting point. It is relatively inert chemically and does not conduct an electrical current very well.

These properties make corundum highly desirable as a refractory (a substance capable of withstanding very high temperatures) and as an abrasive (a material used for cutting, grinding, and polishing other materials). One of the more mundane uses of corundum is in the preparation of toothpaste, where its abrasive properties help in keeping teeth clean and white.

In its granular form, corundum is known as emery. Many consumers are familiar with emery boards used for filing fingernails. Emery, like corundum, is also used in the manufacture of cutting, grinding, and polishing wheels.

The feldspars are a class of minerals known as the aluminum silicates. That is, they all contain aluminum, silicon, and oxygen, as sodium, potassium, and calcium. In many cases, the name feldspar is reserved for the potassium aluminum silicates. The most important commercial use of feldspar is in the manufacture of pottery, enamel, glass, and ceramic materials. The hardness of the mineral also makes it desirable as an abrasive.

Fluorspar is a form of calcium fluoride that occurs naturally in many parts of the world including North America , Mexico, and Europe . The compound gets its name from one of its oldest uses, as a flux. In Latin, the word fluor means flux. A flux is a material that is used in industry to assist in the mixing of other materials or to prevent the formation of oxides during the refining of a metal. For example, fluorspar is often added to an open-hearth steel furnace to react with any oxides that might form during that process. The mineral is also used during the smelting of an ore (the removal of a metal from its naturally occurring ore).

Fluorspar is also the principal source of fluorine gas. The mineral is first converted to hydrogen fluoride which, in turn, is then converted to the element fluorine. Some other uses of fluorspar are in the manufacture of paints and certain types of cement, in the production of emery wheels and carbon electrodes, and as a raw material for phosphors (a substance that glows when bombarded with energy, such as the materials used in color television screens).

The term phosphate refers to any chemical compound containing a characteristic grouping of atoms, given by the formula PO4, or comparable groupings. In the field of industrial minerals, the term most commonly refers to a specific naturally occurring phosphate, calcium phosphate, or phosphate rock. By far the most important use of phosphate rock is in agriculture, where it is treated to produce fertilizers and animal feeds. Typically, about 80% of all the phosphate rock used in the United States goes to one of these agricultural applications.

Phosphate rock is also an important source for the production of other phosphate compounds, such as sodium, potassium, and ammonium phosphate. Each of these compounds, in turn, has a very large variety of uses in everyday life. For example, one form of sodium phosphate is a common ingredient in dishwashing detergents. Another, ammonium phosphate, is used to treat cloth to make it fire retardant. Potassium phosphate is used in the preparation of baking powder.

As with other industrial minerals mentioned here, the term potassium salts applies to a large group of compounds, rather than one single compound. Potassium chloride, sulfate, and nitrate are only three of the most common potassium salts used in industry. The first of these, known as sylvite, can be obtained from salt water or from fossil salt beds. It makes up roughly 1% of each deposit, the remainder of the deposit being sodium chloride (halite).

Potassium salts are similar to phosphate rocks in that their primary use is in agriculture, where they are made into fertilizers, and in the chemical industry, where they are converted into other compounds of potassium. Some compounds of potassium have particularly interesting uses. Potassium nitrate, for example, is unstable and is used in the manufacture of explosives, fireworks, and matches.

Like potassium chloride, sodium chloride (halite) is found both in sea water and in underground salt mines left as the result of the evaporation of ancient seas . Sodium chloride has been known to and used by humans for thousands of years and is best known by its common name of salt, or table salt. By far its most important use is in the manufacture of other industrial chemicals, including sodium hydroxide, hydrochloric acid, chlorine, and metallic sodium. In addition, sodium chloride has many industrial and commercial uses. Among these are in the preservation of foods (by salting, pickling, corning, curing, or some other method), highway de-icing, as an additive for human and other animal foods, in the manufacture of glazes for ceramics, in water softening, and in the manufacture of rubber, metals , textiles, and other commercial products.

Sulfur occurs in its elementary form in large underground deposits from which it is obtained by traditional mining processes or, more commonly, by the Frasch process. In the Frasch process, superheated water is forced down a pipe that has been sunk into a sulfur deposit. The heated water melts the sulfur, which is then forced up a second pipe to the earth's surface.

The vast majority of sulfur is used to manufacture a single compound, sulfuric acid. Sulfuric acid consistently ranks number one in the United States as the chemical produced in largest quantity. Sulfuric acid has a very large number of uses, including the manufacture of fertilizers, the refining of petroleum , the pickling of steel (the removal of oxides from the metal's surface), and the preparation of detergents, explosives, and synthetic fibers.

A significant amount of sulfur is also used to produce sulfur dioxide gas (actually an intermediary in the manufacture of sulfuric acid). Sulfur dioxide, in turn, is extensively used in the pulp and paper industry, as a refrigerant, and in the purification of sugar and the bleaching of paper and other products. Some sulfur is refined after being mined and then used in its elemental form. This sulfur finds application in the vulcanization of rubber, as an insecticide or fungicide, and in the preparation of various chemicals and pharmaceuticals.

See also Geochemistry; Petroleum, economic uses of

More From encyclopedia.com